Development milestones
First flight: 14 July 1988
Developed from: Mooney 301
Aircraft libraryDaher TBM family
Michael Mainiero · CC BY-SA 3.0 · Daher-SOCATA TBM 900 in flightDaher TBM family
Manual yoke loading and aerodynamic pitch-trim relief, with separate propeller, gear and flap cues.
TurbopropTBM95 profile choices
Know the plane
The TBM programme began as a collaboration between SOCATA and Mooney and continued under Daher. The low-wing airframe carries one nose-mounted turboprop and a pressurised cabin. Successive versions developed the engines, aerodynamics, avionics and pilot interface.
The analogue-panel TBM 850, glass-cockpit TBM 900 and TBM 930 occupy different points in that progression. Simulator developers model these panel generations and different levels of persistent system behaviour, documented for each product.
Daher TBM 930
- Powerplant
- Pratt & Whitney PT6A-66D, 850 shp↗
- Seats
- 6↗
- Max takeoff weight
- 7,394 lb (3,354 kg)↗
- Wingspan
- 42 ft 1 in (12.83 m)↗
- Length
- 35 ft 2 in (10.72 m)↗
- Max operating (Vmo)
- 266 KIAS↗
- Stall, landing config (Vs0)
- ≈65 KCAS↗
- Max cruise
- 330 KTAS↗
- Service ceiling
- 31,000 ft↗
- Range
- 1,730 nm↗
- Usable fuel
- 291 US gal↗
- Pressurization
- 6.2 psi differential↗
More about this aircraft on AirframeDB
Demonstrating the 930’s emergency descent and learning its menus
Horne flew the TBM 930 at Tarbes with chief test pilot Stéphane Jacques in March 2016. Their demonstration deliberately explored the aircraft's response to a depressurisation scenario: at 20,000 feet they put on oxygen masks and shut off the bleed-air supply. Horne watched the emergency-descent function turn the aircraft and bring it down to a selected safe level, with terrain affecting the altitude used for the exercise. It was a planned demonstration with a test pilot, rather than an account of an in-service emergency.
He also explored the electronic stability protection and the new G3000 interface. The protective servo forces became noticeable as he pushed toward the system's limits. Meanwhile, the touchscreen menus introduced a learning task even for a pilot familiar with earlier TBMs: finding the right page and returning through layers of selections required practice.
A 960 on a real trip through busy airspace
Boatman joined owner-pilot Malte Lorenz on flights between Hagerstown and Republic Airport in his 2024 TBM 960. The trip put the aircraft into the congested Northeast airspace in which Lorenz regularly used it. A complicated initial clearance and relatively low assigned altitudes reinforced his preference for a turboprop on shorter journeys. At Republic, they made an instrument approach beneath a coastal cloud layer. Another practical moment came when extra passengers wanted to join: the on-board loading calculation showed the proposed load exceeded limits, and they declined the request.
Returning to Hagerstown brought strong southerly winds and a choice of the shorter runway with a more favourable alignment. Lorenz disconnected the autopilot early and controlled the approach speed carefully. Boatman describes a gentle touchdown and ample room remaining, while acknowledging how short the runway looked from the approaching aircraft.
Crisp handling, a coupled go-around and a simulated engine failure
Gerzanics evaluated TBM 940 F-HGDA with Daher demonstration pilot Wayman Luy at Pompano Beach. He found the ground steering precise and the yoke forces light during takeoff. In a fast descent the aircraft responded crisply in all three axes. His stall demonstrations were more varied: the clean stall produced a wings-level pitch break, while flap-extended stalls included a left wing drop that he arrested during recovery. Luy suggested the left-wing radar installation as a possible explanation for that asymmetry.
The flight also contrasted automation with hands-on flying. Gerzanics watched the autopilot and autothrottle manage an instrument approach and coupled go-around, then handled a simulated engine failure toward Belle Glade. They arrived a little high and touched down long, using braking and reverse to slow. He particularly enjoyed manoeuvring the aircraft through tight turns on the narrow runway afterward. The engine remained available during the simulated failure.
Public sources 16
- SOCATA TBMResearch background · Wikipedia revision 1363498428 · retrieved 2026-09-12
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- MSFS 2020 FAQ and edition aircraft inventory
- TBM 850 manual
- X-Plane aircraft and avionics manuals
- TBM 900 product
- Pilot Report: Daher’s New TBM 930A 2016 real-aircraft pilot report. Publisher access restrictions may apply.
- TBM 850Official developer / designated store catalogue · checked 2026-09-12
- TBM’s 930 joins the flockThomas A. Horne · June 2016 · Tarbes demonstration
- Moment of ZenJulie Boatman · November 2024 · 2024 TBM 960
- Power of one: TBM 940 flight testMichael Gerzanics · 15–21 October 2019 · pages 26–29
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- Daher TBM 930 POHPrint or archived reference; no public link
- EASA TCDS A.010Print or archived reference; no public link
- Daher published dataPrint or archived reference; no public link
How the profile models it
Black Square TBM 850
Free + ProMSFS 2020MSFS 2024Black Square
The TBM programme began as a collaboration between SOCATA and Mooney and continued under Daher. The low-wing airframe carries one nose-mounted turboprop and a pressurised cabin. Successive versions developed the engines, aerodynamics, avionics and pilot interface.
This profile selects Black Square TBM 850 for MSFS 2020, MSFS 2024.
The powered-control profile provides its selected yoke centering. Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
Trim changes aircraft balance; the selected profile determines the amount of hardware relief. Valid trim provides the configured pressure relief. Autopilot following is off.
This exact revision has not been enabled for public installation.
Controls and trim
The selected TBM documentation distinguishes elevator anti-tabs from other trim tabs. Automatic-flight disengagement can leave flight-director modes displayed, so the flight director, autopilot and manual trim are separate cockpit states. TBM model and avionics generations remain named in the individual product.
The selected implementation
Black Square’s TBM 850 models elevator anti-tabs and separate trim tabs. Disconnecting the autopilot can leave flight-director modes selected.
About the values
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
Master gain & control system
Master gain85%
The final overall output scale applied to everything the model produces, before the device cap.
More: everything (spring, loads, effects) gets stronger together.
Less: everything softens together.
Why here: Scales overall profile strength while preserving effect balance, subject to device and output limits.
Forces
Spring strength74%
The base centring force that pulls the stick back to centre. Every other force stacks on it. Too low and the stick feels limp in normal flight; too high and it fights your hand and masks the smaller cues layered above it.
More: firmer centring that resists your hand at all times.
Less: a limper stick that leans on aerodynamic load alone.
Why here: The powered-control profile provides its selected yoke centering. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 65 KIAS.
operating manualTBM 850 manualTBM 900: Daher Builds a Near-JetDaher’s TBM 930: MAX Upset ProtectionTBM 900 — AOPA Pilot, April 2014Spring deadband5%
A small neutral zone around centre where the spring stays quiet, so tiny movements at rest don't chatter. Wider is calmer but looser; narrower is more precise but can twitch around centre.
More: a calmer but looser centre with more free play.
Less: a tighter centre that may chatter at rest.
Why here: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Overall aerodynamic load68%
A master scale over both sustained axis loads, applied before their independent balance. Profiles normally leave this alone and tune the two axis loads instead.
More: both axes load up harder.
Less: both axes lighten together.
Why here: The aerodynamic-load gain is 0.68 with an indicated-speed reference of 190 KIAS. This supplies speed-dependent loading alongside the spring.
Airspeed blendingTrue
Enables the low-speed spring engagement window (start/full knots above). Off, the spring is constant at all speeds.
Why here: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Low-speed spring floor55%
How much of the spring survives at a standstill, before airspeed can build any aerodynamic force. A high floor keeps the parked stick firm; a low floor gives the loose, cable-slack feel of a parked light aircraft.
More: a firmer stick while parked and taxiing.
Less: a floppier parked stick that only wakes up with airspeed.
Why here: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring engagement start8 kt
The airspeed where the spring begins climbing from its low-speed floor toward full strength: the controls "coming alive" on the takeoff roll.
Why here: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring engagement full65 kt
The airspeed where the spring reaches full strength. Between the start and this point, centring firms up progressively as airflow builds over the controls.
Why here: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Force tuning speed190
The indicated airspeed where aerodynamic load reaches its designed full level. It anchors the whole load curve to the aircraft's real speed range: a 172 loads up by 110 knots, a jet much later.
More: loads arrive later; the stick stays light up to a higher speed.
Less: loads arrive earlier and cruise feels heavier.
Why here: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Centre firmness vs speed15%
How much the centring itself stiffens with speed, on top of the deflection loads. Zero keeps centre feel constant; more makes the stick centre harder at cruise and looser in the pattern.
More: a centre that hardens noticeably as you go faster.
Less: constant centre feel at every speed.
Why here: The high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 65 KIAS, with the squared-speed ratio capped at 5.
Centre stiffening cap5
The upper limit on speed-driven centre stiffening, so very fast flight can't wind the spring up without bound.
More: more total stiffening allowed at high speed.
Less: stiffening clamps off sooner.
Why here: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron load72%
The sustained roll load from aileron deflection and airspeed, balanced independently of pitch. Together with the elevator load it sets the control-harmony ratio reviewers talk about.
More: heavier roll forces.
Less: lighter, quicker-feeling ailerons.
Why here: Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator load100%
The sustained pitch load from elevator deflection and airspeed, balanced independently of roll. This is the main lever behind a type's pitch weight. It does not touch aileron, spring, trim, or buffet forces.
More: heavier sustained pitch forces at speed.
Less: a lighter elevator that takes less muscle to hold.
Why here: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Max output force55%
A cap on each steady pitch or roll force before it reaches the device, guarding against slamming or saturating the hardware in strong maneuvers.
More: stronger peak steady forces before clipping.
Less: a gentler ceiling; hard maneuvers flatten out sooner.
Why here: Caps directed-force output. Native spring effects and device limits remain separate.
Trim
Trim relief (elevator)30%
How strongly elevator trim relieves held pitch force and shifts where the stick settles. At 100%, a properly trimmed aircraft needs no held pressure, the trim-away-the-load workflow of real flying.
More: trim removes more of the held pitch force; at 100% full trim zeroes it.
Less: you keep holding force even when trimmed.
Why here: Trim changes aircraft balance; the selected profile determines the amount of hardware relief. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.14.
operating manualTBM 850 manualTBM 900: Daher Builds a Near-JetDaher’s TBM 930: MAX Upset ProtectionTBM 900 — AOPA Pilot, April 2014Trim relief (aileron)14%
The same relief for roll trim. Most GA types have no real aileron trim, so this stays at zero; types with roll trim get a matching value.
More: roll trim removes more held roll force.
Less: roll trim does less.
Why here: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Effect gains · ground
Runway rumble42%
Rolling surface vibration from wheel speed and surface type: pavement, grass, or gravel under the gear.
More: louder surface texture through the stick.
Less: a smoother taxi.
Why here: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Gear bumps32%
Short discrete bumps from expansion joints, ruts, and rough surface, punctuating the continuous rumble.
More: sharper hits from joints and ruts.
Less: softer ground detail.
Why here: Sets gear-bump texture during ground motion, separate from touchdown impact.
Effect gains · airframe
Stall buffet28%
Airframe shake approaching the stall and while the stall warning is active: how loudly this wing announces it is unhappy. Types with a crisp break get modest buffet and let the horn carry the warning.
More: a louder pre-stall shake.
Less: a quieter wing; the horn carries the warning.
Why here: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Mach buffet0%
Transonic buffet approaching the Mach limit. Meaningful for jets near MMO, zero for pistons and turboprops that never get there.
More: stronger transonic buffet near the Mach limit.
Less: a smoother high-Mach ride.
Why here: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Flap buffet0%
Low-frequency airframe vibration with flaps extended into the airflow, in the speed window where they actually work the air.
More: a rougher ride with flaps working the air.
Less: smoother approach flap.
Why here: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Gear buffet0%
Airframe drumming from retractable gear hanging in the airstream. Zero for fixed-gear types, where the airframe never changes shape.
More: more drumming with the wheels hanging out.
Less: cleaner gear-down flight.
Why here: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Stick shaker50%
The dedicated stall stick-shaker buzz, fired by the aircraft's own stall-warning system. Only types with a real shaker get a value; everything else relies on aerodynamic buffet and the horn.
More: a harder stick-shaker buzz.
Less: a subtler shaker.
Why here: Sets triggered shaker strength; inactive while the shaker feature is disabled.
Effect gains · engine, mechanical & drag
Touchdown thump82%
The one-shot kick when the wheels meet the runway, scaled by sink rate: a greaser whispers, a firm arrival thumps.
More: a harder kick at touchdown.
Less: softer arrivals.
Why here: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Reverse rumble0%
Rollout vibration while reverse thrust or beta-range props are working. Zero for types without reverse.
More: a rougher rollout under reverse.
Less: quieter reverse.
Why here: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine rumble6%
Continuous powerplant vibration following RPM between idle and full power, the ever-present reminder that something is burning fuel up front.
More: more engine through the stick.
Less: a quieter powerplant.
Why here: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Flap motion12%
Continuous vibration only while the sim reports the flap surfaces actually travelling. It follows real actuator motion and failures, not an estimated timer.
More: more vibration while the flap surfaces travel.
Less: quieter flap runs.
Why here: Sets texture from observed flap movement; a command without movement does not establish the cue.
Autopilot follow
AP follow authority10%
How far autopilot commands may physically move the stick. Kept tiny in MSFS, where a moved axis can read back as pilot input; zero disables following entirely.
More: the autopilot visibly moves your stick further.
Less: a barely perceptible follow.
Why here: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Stick feel
StickFeel · Trim feel enabledFalse
Whether this feature is active in this profile.
Why here: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledTrue
Whether this feature is active in this profile.
Why here: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Force trim enabledFalse
Whether this feature is active in this profile.
Why here: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledTrue
Whether this feature is active in this profile.
Why here: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledTrue
Whether this feature is active in this profile.
Why here: Enables rate damping with the configured coefficients and control law.
Autopilot
Autopilot · Follow enabledFalse
Whether this feature is active in this profile.
Why here: Autopilot following is off; the configured spring and load retain the hardware feel.
Autopilot · Neutral hold enabledFalse
Whether this feature is active in this profile.
Why here: Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.6
Why here: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero
Aero · EnabledTrue
Whether this feature is active in this profile.
Why here: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Max flap index2
Where this effect reaches full strength (or has fully faded, for washouts).
More: a more gradual build to a later peak.
Less: a quicker build.
Why here: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index2
Where this effect begins fading in.
More: the effect begins later.
Less: it begins earlier.
Why here: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Shaker enabledFalse
Whether this feature is active in this profile.
Why here: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Ground
Ground · EnabledTrue
Whether this feature is active in this profile.
Why here: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Engine
Engine · EnabledTrue
Whether this feature is active in this profile.
Why here: Enables engine cues with nonzero settings and valid running-engine telemetry.
Mechanical
Mechanical · EnabledTrue
Whether this feature is active in this profile.
Why here: Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0.12
The strength of this effect.
More: a stronger effect.
Less: a weaker one.
Why here: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
All profile settings
| Parameter | Value | What it controls and why |
|---|---|---|
| Spring strength | 0.74 | The powered-control profile provides its selected yoke centering. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 65 KIAS. |
| Spring deadband | 0.05 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Force gain | 0.68 | The aerodynamic-load gain is 0.68 with an indicated-speed reference of 190 KIAS. This supplies speed-dependent loading alongside the spring. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | True | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.55 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 8 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 65 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Force tuning speed | 190 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0.15 | The high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 65 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 0.72 | Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | 1 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| StickFeel · Trim feel enabled | False | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | True | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0.3 | Trim changes aircraft balance; the selected profile determines the amount of hardware relief. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.14. |
| StickFeel · Aileron authority | 0.14 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| StickFeel · G load enabled | True | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | True | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot · Follow authority | 0.1 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | False | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.6 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.28 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 2 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | True | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0.42 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0.32 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0.82 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | True | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0.06 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0.12 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0.12 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Public sources 20
- SOCATA TBMResearch background · Wikipedia revision 1363498428 · retrieved 2026-09-12
- operating manualTBM850 manual controls, autopilot and change log: trim animation correction
- TBM 850 manualDaher TBM family
- TBM 900: Daher Builds a Near-JetDaher TBM family
- Daher’s TBM 930: MAX Upset ProtectionDaher TBM family
- TBM 900 — AOPA Pilot, April 2014Daher TBM family
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- MSFS 2020 FAQ and edition aircraft inventory
- X-Plane aircraft and avionics manuals
- TBM 900 product
- Pilot Report: Daher’s New TBM 930A 2016 real-aircraft pilot report. Publisher access restrictions may apply.
- TBM 850Official developer / designated store catalogue · checked 2026-09-12
- TBM’s 930 joins the flockThomas A. Horne · June 2016 · Tarbes demonstration
- Moment of ZenJulie Boatman · November 2024 · 2024 TBM 960
- Power of one: TBM 940 flight testMichael Gerzanics · 15–21 October 2019 · pages 26–29
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- Daher TBM 930 POHPrint or archived reference; no public link
- EASA TCDS A.010Print or archived reference; no public link
- Daher published dataPrint or archived reference; no public link
Community & corrections
If your time in the type says this page got something wrong, correct it here.
Pilot corrections
Fly this aircraft? Correct this page.
This page is built from cited references, and real time in the type beats a citation. Quote the claim that reads wrong and tell us what the actual aircraft does. Corrections go to the maintainer for review and feed the next revision of this research.
Sign in to submit a correction. No password, just a one-time email link.
Sign in
Hangar talk
Open conversation about flying and tuning the Daher TBM family, in the community forum. Corrections above go privately to the maintainer; hangar talk is public.
Sign in to start it. No password, just a one-time email link.
Sign in
Community
Community profiles for this aircraft
No community profiles for this aircraft yet.
Tuned it your way? Share a profile and it will appear here.