Development milestones
First flight: 14 July 1988
Developed from: Mooney 301
The TBM programme began as a collaboration between SOCATA and Mooney and continued under Daher. The low-wing airframe carries one nose-mounted turboprop and a pressurised cabin. Successive versions developed the engines, aerodynamics, avionics and pilot interface.
The analogue-panel TBM 850, glass-cockpit TBM 900 and TBM 930 occupy different points in that progression. Simulator developers model these panel generations and different levels of persistent system behaviour, documented for each product.
Daher TBM 930
Meer over dit vliegtuig op AirframeDB
First flight: 14 July 1988
Developed from: Mooney 301
Horne flew the TBM 930 at Tarbes with chief test pilot Stéphane Jacques in March 2016. Their demonstration deliberately explored the aircraft's response to a depressurisation scenario: at 20,000 feet they put on oxygen masks and shut off the bleed-air supply. Horne watched the emergency-descent function turn the aircraft and bring it down to a selected safe level, with terrain affecting the altitude used for the exercise. It was a planned demonstration with a test pilot, rather than an account of an in-service emergency.
He also explored the electronic stability protection and the new G3000 interface. The protective servo forces became noticeable as he pushed toward the system's limits. Meanwhile, the touchscreen menus introduced a learning task even for a pilot familiar with earlier TBMs: finding the right page and returning through layers of selections required practice.
Boatman joined owner-pilot Malte Lorenz on flights between Hagerstown and Republic Airport in his 2024 TBM 960. The trip put the aircraft into the congested Northeast airspace in which Lorenz regularly used it. A complicated initial clearance and relatively low assigned altitudes reinforced his preference for a turboprop on shorter journeys. At Republic, they made an instrument approach beneath a coastal cloud layer. Another practical moment came when extra passengers wanted to join: the on-board loading calculation showed the proposed load exceeded limits, and they declined the request.
Returning to Hagerstown brought strong southerly winds and a choice of the shorter runway with a more favourable alignment. Lorenz disconnected the autopilot early and controlled the approach speed carefully. Boatman describes a gentle touchdown and ample room remaining, while acknowledging how short the runway looked from the approaching aircraft.
Gerzanics evaluated TBM 940 F-HGDA with Daher demonstration pilot Wayman Luy at Pompano Beach. He found the ground steering precise and the yoke forces light during takeoff. In a fast descent the aircraft responded crisply in all three axes. His stall demonstrations were more varied: the clean stall produced a wings-level pitch break, while flap-extended stalls included a left wing drop that he arrested during recovery. Luy suggested the left-wing radar installation as a possible explanation for that asymmetry.
The flight also contrasted automation with hands-on flying. Gerzanics watched the autopilot and autothrottle manage an instrument approach and coupled go-around, then handled a simulated engine failure toward Belle Glade. They arrived a little high and touched down long, using braking and reverse to slow. He particularly enjoyed manoeuvring the aircraft through tight turns on the narrow runway afterward. The engine remained available during the simulated failure.
The TBM programme began as a collaboration between SOCATA and Mooney and continued under Daher. The low-wing airframe carries one nose-mounted turboprop and a pressurised cabin. Successive versions developed the engines, aerodynamics, avionics and pilot interface.
This starting point selects Daher TBM 930. Its aircraft-level settings do not select a particular developer’s custom systems.
The powered-control profile provides its selected yoke centering. Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
Trim changes aircraft balance; the selected profile determines the amount of hardware relief. Valid trim provides the configured pressure relief. Autopilot following is enabled for supported control references.
The selected TBM documentation distinguishes elevator anti-tabs from other trim tabs. Automatic-flight disengagement can leave flight-director modes displayed, so the flight director, autopilot and manual trim are separate cockpit states. TBM model and avionics generations remain named in the individual product.
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
De uiteindelijke totaalschaal over alles wat het model produceert, vóór de apparaatbegrenzing.
Meer: alles (veer, belastingen, effecten) wordt samen sterker.
Minder: alles wordt samen zachter.
Waarom hier: Scales overall profile strength while preserving effect balance, subject to device and output limits.
De basiscentreerkracht die de stick terug naar het midden trekt. Elke andere kracht stapelt hierop. Te laag en de stick voelt slap in normale vlucht; te hoog en hij vecht tegen je hand en maskeert de kleinere signalen erbovenop.
Meer: een steviger centreren dat de hand meer weerstaat.
Minder: een slappere stick die alleen op aerodynamische belasting leunt.
Waarom hier: The powered-control profile provides its selected yoke centering. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 90 KIAS.
operating manualTBM 850 manualTBM 900: Daher Builds a Near-JetDaher’s TBM 930: MAX Upset ProtectionTBM 900 — AOPA Pilot, April 2014Een kleine neutrale zone rond het midden waar de veer stil blijft, zodat minieme bewegingen in rust niet ratelen. Breder is rustiger maar losser; smaller is preciezer maar kan rond het midden trillen.
Meer: een rustiger maar losser midden, met meer speling.
Minder: een strakker midden dat in rust kan trillen.
Waarom hier: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Een masterschaal over beide aangehouden asbelastingen, toegepast vóór hun onafhankelijke balans. Profielen laten dit normaal met rust en stemmen de twee asbelastingen af.
Meer: beide assen laden zwaarder.
Minder: beide assen worden samen lichter.
Waarom hier: The aerodynamic-load gain is 0.68 with an indicated-speed reference of 220 KIAS. This supplies speed-dependent loading alongside the spring.
Schakelt het lage-snelheidsvenster van de veeraangrijping in (start/vol-knopen hierboven). Uit betekent een constante veer op alle snelheden.
Waarom hier: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Hoeveel van de veer overleeft bij stilstand, voordat luchtsnelheid aerodynamische kracht kan opbouwen. Een hoge vloer houdt de geparkeerde stick stevig; een lage geeft het losse, kabelslappe gevoel van een geparkeerd licht vliegtuig.
Meer: een stevigere stick geparkeerd en tijdens taxiën.
Minder: een slappe stick geparkeerd die pas met snelheid ontwaakt.
Waarom hier: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
De snelheid waarbij de veer vanaf zijn lage-snelheidsvloer richting volle sterkte begint te klimmen: de besturing die 'tot leven komt' tijdens de startrol.
Waarom hier: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
De snelheid waarbij de veer volle sterkte bereikt. Tussen het begin en dit punt wordt het centreren geleidelijk steviger naarmate de luchtstroom over de roeren groeit.
Waarom hier: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
De aangewezen snelheid waarbij de aerodynamische belasting haar ontworpen volle niveau bereikt. Hij verankert de hele belastingscurve aan het echte snelheidsbereik van het vliegtuig: een 172 laadt op tegen 110 knopen, een jet veel later.
Meer: belastingen komen later; de stick blijft langer licht.
Minder: belastingen komen eerder en de kruisvlucht weegt zwaarder.
Waarom hier: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Hoeveel het centreren zelf met snelheid verstijft, bovenop de uitslagbelastingen. Nul houdt het middengevoel constant; meer laat de stick harder centreren op kruissnelheid en losser in het circuit.
Meer: een midden dat duidelijk verhardt met snelheid.
Minder: een constant middengevoel op elke snelheid.
Waarom hier: The high-speed spring-stiffening gain is 0.1. It strengthens the permitted spring response above 90 KIAS, with the squared-speed ratio capped at 5.
De bovengrens van snelheidsgedreven centreerverstijving, zodat zeer snelle vlucht de veer niet onbegrensd kan opwinden.
Meer: meer totale verstijving toegestaan op hoge snelheid.
Minder: de verstijving stopt eerder.
Waarom hier: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
De aangehouden rolbelasting uit rolroeruitslag en snelheid, onafhankelijk van pitch gebalanceerd. Samen met de hoogteroerbelasting bepaalt dit de stuurharmonie waar recensenten het over hebben.
Meer: zwaardere rolkrachten.
Minder: lichtere, levendigere rolroeren.
Waarom hier: Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
De aangehouden pitchbelasting uit hoogteroeruitslag en snelheid, onafhankelijk van rol gebalanceerd. Dit is de hoofdhendel achter het pitchgewicht van een type. Hij raakt rolroer-, veer-, trim- of buffetkrachten niet.
Meer: zwaardere aangehouden pitchkrachten op snelheid.
Minder: een lichter hoogteroer, minder spierkracht om vast te houden.
Waarom hier: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Een plafond op elke gestage pitch- of rolkracht voordat die het apparaat bereikt, ter bescherming tegen beuken of verzadigen van de hardware bij stevige manoeuvres.
Meer: hogere gestage krachtpieken vóór afkapping.
Minder: een zachter plafond; harde manoeuvres vlakken eerder af.
Waarom hier: Caps directed-force output. Native spring effects and device limits remain separate.
Hoe sterk hoogteroertrim de vastgehouden pitchkracht verlicht en verschuift waar de stick tot rust komt. Op 100 % heeft een goed getrimd vliegtuig geen vastgehouden druk nodig, de trim-de-last-weg-werkwijze van echt vliegen.
Meer: trim neemt meer vastgehouden kracht weg; op 100 % heft volle trim hem op.
Minder: je blijft kracht houden, zelfs getrimd.
Waarom hier: Trim changes aircraft balance; the selected profile determines the amount of hardware relief. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.14.
operating manualTBM 850 manualTBM 900: Daher Builds a Near-JetDaher’s TBM 930: MAX Upset ProtectionTBM 900 — AOPA Pilot, April 2014Dezelfde verlichting voor roltrim. De meeste GA-types hebben geen echte rolroertrim, dus dit blijft op nul; types met roltrim krijgen een passende waarde.
Meer: roltrim neemt meer vastgehouden kracht weg.
Minder: roltrim doet minder.
Waarom hier: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Rollende oppervlaktetrilling uit wielsnelheid en ondergrondtype: asfalt, gras of grind onder het onderstel.
Meer: een sterkere oppervlaktetextuur in de stick.
Minder: gladder taxiën.
Waarom hier: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Korte losse stoten van uitzetvoegen, sporen en ruw oppervlak, die het doorlopende gerommel accentueren.
Meer: scherpere stoten van voegen en sporen.
Minder: zachtere gronddetails.
Waarom hier: Sets gear-bump texture during ground motion, separate from touchdown impact.
Casco-schudden bij het naderen van de overtrek en terwijl de overtrekwaarschuwing actief is: hoe luid deze vleugel aankondigt dat hij ontevreden is. Types met een scherpe afbreek krijgen bescheiden buffet en laten de hoorn de waarschuwing dragen.
Meer: een sterker trillen vóór de overtrek.
Minder: een discretere vleugel; de hoorn draagt de waarschuwing.
Waarom hier: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Transsoon buffet bij het naderen van de Machlimiet. Betekenisvol voor jets nabij MMO, nul voor zuigers en turboprops die er nooit komen.
Meer: een sterker transsoon buffet nabij de Machlimiet.
Minder: gladder vliegen op hoge Mach.
Waarom hier: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Laagfrequente casco-trilling met kleppen uitgeslagen in de luchtstroom, in het snelheidsvenster waar ze de lucht echt bewerken.
Meer: ruwer vliegen met werkende kleppen.
Minder: zachtere naderingskleppen.
Waarom hier: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Casco-getrommel van intrekbaar onderstel dat in de luchtstroom hangt. Nul voor types met vast onderstel, waar het casco nooit van vorm verandert.
Meer: meer getrommel met het onderstel uit.
Minder: schoner vliegen met onderstel uit.
Waarom hier: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
De speciale stall-stickshakerzoem, geactiveerd door het eigen overtrekwaarschuwingssysteem van het vliegtuig. Alleen types met een echte shaker krijgen een waarde; de rest steunt op aerodynamisch buffet en de hoorn.
Meer: een hardere shaker.
Minder: een discretere shaker.
Waarom hier: Sets triggered shaker strength; inactive while the shaker feature is disabled.
De eenmalige dreun als de wielen de baan raken, geschaald op daalsnelheid: een zachte landing fluistert, een stevige aankomst bonkt.
Meer: een hardere dreun bij de landing.
Minder: zachtere aankomsten.
Waarom hier: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Uitroltrilling terwijl reverse thrust of props in beta werken. Nul voor types zonder reverse.
Meer: ruwer uitrollen onder reverse.
Minder: een discretere reverse.
Waarom hier: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Doorlopende motortrilling die het toerental volgt tussen stationair en vol vermogen, de altijd aanwezige herinnering dat er voorin iets brandstof verbrandt.
Meer: meer motor in de stick.
Minder: een discretere motor.
Waarom hier: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Doorlopende trilling alleen terwijl de sim meldt dat de klepvlakken daadwerkelijk bewegen. Volgt echte actuatorbeweging en storingen, geen geschatte timer.
Meer: meer trilling met bewegende kleppen.
Minder: discretere klepbewegingen.
Waarom hier: Sets texture from observed flap movement; a command without movement does not establish the cue.
Hoe ver autopilootcommando's de stick fysiek mogen bewegen. Piepklein gehouden in MSFS, waar een bewogen as kan worden teruggelezen als pilooteninvoer; nul schakelt volgen volledig uit.
Meer: de autopiloot beweegt je stick zichtbaar meer.
Minder: een nauwelijks merkbaar volgen.
Waarom hier: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Whether this feature is active in this profile.
Waarom hier: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Whether this feature is active in this profile.
Waarom hier: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Whether this feature is active in this profile.
Waarom hier: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
Whether this feature is active in this profile.
Waarom hier: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Whether this feature is active in this profile.
Waarom hier: Enables rate damping with the configured coefficients and control law.
Whether this feature is active in this profile.
Waarom hier: Following is on at 0.1 authority when a supported, valid autopilot control reference is available.
Whether this feature is active in this profile.
Waarom hier: Permits centering hold during a supported AP state, separate from following a moving target.
Waarom hier: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Whether this feature is active in this profile.
Waarom hier: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Where this effect reaches full strength (or has fully faded, for washouts).
Meer: a more gradual build to a later peak.
Minder: a quicker build.
Waarom hier: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Where this effect begins fading in.
Meer: the effect begins later.
Minder: it begins earlier.
Waarom hier: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Whether this feature is active in this profile.
Waarom hier: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Whether this feature is active in this profile.
Waarom hier: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Whether this feature is active in this profile.
Waarom hier: Enables engine cues with nonzero settings and valid running-engine telemetry.
Whether this feature is active in this profile.
Waarom hier: Enables accessory cues with configured strengths and observed accessory movement.
The strength of this effect.
Meer: a stronger effect.
Minder: a weaker one.
Waarom hier: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
| Parameter | Waarde | Wat het regelt en waarom |
|---|---|---|
| Spring strength | 0.74 | The powered-control profile provides its selected yoke centering. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 90 KIAS. |
| Spring deadband | 0.05 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Force gain | 0.68 | The aerodynamic-load gain is 0.68 with an indicated-speed reference of 220 KIAS. This supplies speed-dependent loading alongside the spring. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | True | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.55 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 20 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 90 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Snelheid voor krachtafstemming | 220.0 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0.1 | The high-speed spring-stiffening gain is 0.1. It strengthens the permitted spring response above 90 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 0.72 | Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | 1.0 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| StickFeel · Trim feel enabled | True | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | True | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0.3 | Trim changes aircraft balance; the selected profile determines the amount of hardware relief. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.14. |
| StickFeel · Aileron authority | 0.14 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| StickFeel · G load enabled | True | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | True | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | True | Following is on at 0.1 authority when a supported, valid autopilot control reference is available. |
| Autopilot · Follow authority | 0.1 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | False | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.6 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.28 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0.14 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 2 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0.1 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | True | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0.42 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0.32 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0.82 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0.48 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | True | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0.06 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0.12 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0.12 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Zegt jouw ervaring op het type dat deze pagina iets fout heeft? Corrigeer het hier.
Deze pagina is gebouwd op geciteerde bronnen, en echte ervaring op het type verslaat elke bron. Citeer de foute bewering en vertel ons wat het echte toestel doet. Correcties gaan ter beoordeling naar de maintainer en voeden de volgende revisie van dit onderzoek.
Open gesprek over het vliegen en afstellen van de Daher TBM family, op het communityforum. Correcties hierboven gaan privé naar de maintainer; hangarpraat is openbaar.