Development milestones
First flight: February 9, 1963 ( 1963-02-09 )
Boeing developed the 727 after the 707, arranging three engines around the rear fuselage and a high T-tail. The first flight took place in 1963, with service following in 1964. Its elaborate high-lift wing supported the programme's airport-access ambitions.
The -100 and longer -200 have different proportions, while freighter conversions add another role. In the cockpit, a flight engineer and period autopilot installations create a very different workflow from a modern 737. The simulator manuals identify the installed flight-guidance systems.
Boeing 727 · Specifications (Boeing 727-100 with JT8D-7) · real aircraft; source units retained
Meer over dit vliegtuig op AirframeDB
First flight: February 9, 1963 ( 1963-02-09 )
Armstrong remembers the 727 through the varied people and places that filled its charter schedule. Her flying included sports teams, professional wrestlers, firefighters and unusual destinations where the aircraft’s independence from extensive ground services was useful. Having worked in all three cockpit positions, she valued the flight engineer’s seat as a place to learn the aircraft and observe how a crew worked together.
The physical setting is just as vivid in her recollection: noisy engines, a trim wheel close to her knee and, on one aircraft with defective heating ducts, winter coats and hot coffee in a very cold cockpit. Simulator sessions explored failures that were uncomfortable to practise but valuable to understand. She remembers the aircraft as demanding familiarity and respect, then rewarding that effort with an unusually direct connection between pilot and machine.
Powell volunteered for the first 727’s final delivery because he still flew the type regularly and had accumulated more than ten thousand hours in it. His connection went back to eight years as a Western Airlines flight engineer, after which returning to a forward-facing pilot’s seat had been a particular pleasure. Above all, he enjoyed the aircraft’s hand-flying qualities.
For the planned flight to Seattle’s Museum of Flight, he expected to work with colleagues he already knew well and wanted an additional observer watching from the jump seat. He trusted the restoration team’s preparation and described the prospect as bittersweet. Even his intended clothes carried a connection to the past: a flight jacket, white shirt and tie would echo first-flight pilot Lew Wallick. His aim for the occasion was a straightforward, careful delivery of an aircraft that had already done its work.
Tarsa’s first 727 flight came at thirteen, when his father bought him a short sightseeing trip from Chicago Midway. The acceleration, the view of the lakeshore and the realisation that only air supported the aircraft made him want to become a pilot. Decades later, starting with UPS as a 727 second officer, he saw the Chicago skyline again and remembered that first ride with his father.
His last flight on the type brought another sequence of personal landmarks. Ferrying an aircraft back from Europe in November 2003, he landed in Iceland and shared the Atlantic crossing duties with his first officer. On the final leg from Bangor to Louisville, the landscape below recalled his childhood home, meeting his wife and her family’s hometown. As he approached Louisville, he could see his own neighbourhood. His farewell to the aircraft became a quiet expression of gratitude to his father.
A rear-engined trijet built to bring jet service to shorter routes and smaller airports.
The spring stays independent of airspeed. A separate aerodynamic term adds speed-dependent control load.
Pitch-trim relief is off. Autopilot following is off.
The 727 control documentation describes hydraulically powered flight controls, hydraulic elevator feel computers, and spring-based aileron feel and centering.
Aileron trim repositions the control-wheel neutral point; pitch trim changes stabilizer angle, with column-neutral movement described only over a conditional stabilizer-trim range.
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
De uiteindelijke totaalschaal over alles wat het model produceert, vóór de apparaatbegrenzing.
Meer: alles (veer, belastingen, effecten) wordt samen sterker.
Minder: alles wordt samen zachter.
Waarom hier: Scales overall profile strength while preserving effect balance, subject to device and output limits.
De basiscentreerkracht die de stick terug naar het midden trekt. Elke andere kracht stapelt hierop. Te laag en de stick voelt slap in normale vlucht; te hoog en hij vecht tegen je hand en maskeert de kleinere signalen erbovenop.
Meer: een steviger centreren dat de hand meer weerstaat.
Minder: een slappere stick die alleen op aerodynamische belasting leunt.
Waarom hier: This profile uses powered-control feel for Boeing 727. The baseline spring is 0.8. Low-speed spring blending is off.
Een masterschaal over beide aangehouden asbelastingen, toegepast vóór hun onafhankelijke balans. Profielen laten dit normaal met rust en stemmen de twee asbelastingen af.
Meer: beide assen laden zwaarder.
Minder: beide assen worden samen lichter.
Waarom hier: The aerodynamic-load gain is 0.25 with an indicated-speed reference of 250 KIAS. The hydraulic-load factor of 0.45 scales that modeled term; it is a selected artificial-feel approximation.
Een plafond op elke gestage pitch- of rolkracht voordat die het apparaat bereikt, ter bescherming tegen beuken of verzadigen van de hardware bij stevige manoeuvres.
Meer: hogere gestage krachtpieken vóór afkapping.
Minder: een zachter plafond; harde manoeuvres vlakken eerder af.
Waarom hier: Caps directed-force output. Native spring effects and device limits remain separate.
De aangehouden pitchbelasting uit hoogteroeruitslag en snelheid, onafhankelijk van rol gebalanceerd. Dit is de hoofdhendel achter het pitchgewicht van een type. Hij raakt rolroer-, veer-, trim- of buffetkrachten niet.
Meer: zwaardere aangehouden pitchkrachten op snelheid.
Minder: een lichter hoogteroer, minder spierkracht om vast te houden.
Waarom hier: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
De aangehouden rolbelasting uit rolroeruitslag en snelheid, onafhankelijk van pitch gebalanceerd. Samen met de hoogteroerbelasting bepaalt dit de stuurharmonie waar recensenten het over hebben.
Meer: zwaardere rolkrachten.
Minder: lichtere, levendigere rolroeren.
Waarom hier: Roll and pitch aerodynamic scales are 0.7 and 0.86, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
De aangewezen snelheid waarbij de aerodynamische belasting haar ontworpen volle niveau bereikt. Hij verankert de hele belastingscurve aan het echte snelheidsbereik van het vliegtuig: een 172 laadt op tegen 110 knopen, een jet veel later.
Meer: belastingen komen later; de stick blijft langer licht.
Minder: belastingen komen eerder en de kruisvlucht weegt zwaarder.
Waarom hier: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
De snelheid waarbij de veer vanaf zijn lage-snelheidsvloer richting volle sterkte begint te klimmen: de besturing die 'tot leven komt' tijdens de startrol.
Waarom hier: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
De snelheid waarbij de veer volle sterkte bereikt. Tussen het begin en dit punt wordt het centreren geleidelijk steviger naarmate de luchtstroom over de roeren groeit.
Waarom hier: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Een kleine neutrale zone rond het midden waar de veer stil blijft, zodat minieme bewegingen in rust niet ratelen. Breder is rustiger maar losser; smaller is preciezer maar kan rond het midden trillen.
Meer: een rustiger maar losser midden, met meer speling.
Minder: een strakker midden dat in rust kan trillen.
Waarom hier: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Schakelt het lage-snelheidsvenster van de veeraangrijping in (start/vol-knopen hierboven). Uit betekent een constante veer op alle snelheden.
Waarom hier: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Hoeveel van de veer overleeft bij stilstand, voordat luchtsnelheid aerodynamische kracht kan opbouwen. Een hoge vloer houdt de geparkeerde stick stevig; een lage geeft het losse, kabelslappe gevoel van een geparkeerd licht vliegtuig.
Meer: een stevigere stick geparkeerd en tijdens taxiën.
Minder: een slappe stick geparkeerd die pas met snelheid ontwaakt.
Waarom hier: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Hoeveel het centreren zelf met snelheid verstijft, bovenop de uitslagbelastingen. Nul houdt het middengevoel constant; meer laat de stick harder centreren op kruissnelheid en losser in het circuit.
Meer: een midden dat duidelijk verhardt met snelheid.
Minder: een constant middengevoel op elke snelheid.
Waarom hier: The high-speed spring-stiffening gain is 0. No additional speed-driven stiffening is added; this does not disable independent aerodynamic loading.
De bovengrens van snelheidsgedreven centreerverstijving, zodat zeer snelle vlucht de veer niet onbegrensd kan opwinden.
Meer: meer totale verstijving toegestaan op hoge snelheid.
Minder: de verstijving stopt eerder.
Waarom hier: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Hoe sterk hoogteroertrim de vastgehouden pitchkracht verlicht en verschuift waar de stick tot rust komt. Op 100 % heeft een goed getrimd vliegtuig geen vastgehouden druk nodig, de trim-de-last-weg-werkwijze van echt vliegen.
Meer: trim neemt meer vastgehouden kracht weg; op 100 % heft volle trim hem op.
Minder: je blijft kracht houden, zelfs getrimd.
Waarom hier: The profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0.
Dezelfde verlichting voor roltrim. De meeste GA-types hebben geen echte rolroertrim, dus dit blijft op nul; types met roltrim krijgen een passende waarde.
Meer: roltrim neemt meer vastgehouden kracht weg.
Minder: roltrim doet minder.
Waarom hier: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Rollende oppervlaktetrilling uit wielsnelheid en ondergrondtype: asfalt, gras of grind onder het onderstel.
Meer: een sterkere oppervlaktetextuur in de stick.
Minder: gladder taxiën.
Waarom hier: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Korte losse stoten van uitzetvoegen, sporen en ruw oppervlak, die het doorlopende gerommel accentueren.
Meer: scherpere stoten van voegen en sporen.
Minder: zachtere gronddetails.
Waarom hier: Sets gear-bump texture during ground motion, separate from touchdown impact.
Casco-schudden bij het naderen van de overtrek en terwijl de overtrekwaarschuwing actief is: hoe luid deze vleugel aankondigt dat hij ontevreden is. Types met een scherpe afbreek krijgen bescheiden buffet en laten de hoorn de waarschuwing dragen.
Meer: een sterker trillen vóór de overtrek.
Minder: een discretere vleugel; de hoorn draagt de waarschuwing.
Waarom hier: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Transsoon buffet bij het naderen van de Machlimiet. Betekenisvol voor jets nabij MMO, nul voor zuigers en turboprops die er nooit komen.
Meer: een sterker transsoon buffet nabij de Machlimiet.
Minder: gladder vliegen op hoge Mach.
Waarom hier: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Laagfrequente casco-trilling met kleppen uitgeslagen in de luchtstroom, in het snelheidsvenster waar ze de lucht echt bewerken.
Meer: ruwer vliegen met werkende kleppen.
Minder: zachtere naderingskleppen.
Waarom hier: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Casco-getrommel van intrekbaar onderstel dat in de luchtstroom hangt. Nul voor types met vast onderstel, waar het casco nooit van vorm verandert.
Meer: meer getrommel met het onderstel uit.
Minder: schoner vliegen met onderstel uit.
Waarom hier: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
De speciale stall-stickshakerzoem, geactiveerd door het eigen overtrekwaarschuwingssysteem van het vliegtuig. Alleen types met een echte shaker krijgen een waarde; de rest steunt op aerodynamisch buffet en de hoorn.
Meer: een hardere shaker.
Minder: een discretere shaker.
Waarom hier: Sets triggered shaker strength; inactive while the shaker feature is disabled.
De eenmalige dreun als de wielen de baan raken, geschaald op daalsnelheid: een zachte landing fluistert, een stevige aankomst bonkt.
Meer: een hardere dreun bij de landing.
Minder: zachtere aankomsten.
Waarom hier: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Uitroltrilling terwijl reverse thrust of props in beta werken. Nul voor types zonder reverse.
Meer: ruwer uitrollen onder reverse.
Minder: een discretere reverse.
Waarom hier: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Doorlopende motortrilling die het toerental volgt tussen stationair en vol vermogen, de altijd aanwezige herinnering dat er voorin iets brandstof verbrandt.
Meer: meer motor in de stick.
Minder: een discretere motor.
Waarom hier: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Doorlopende trilling alleen terwijl de sim meldt dat de klepvlakken daadwerkelijk bewegen. Volgt echte actuatorbeweging en storingen, geen geschatte timer.
Meer: meer trilling met bewegende kleppen.
Minder: discretere klepbewegingen.
Waarom hier: Sets texture from observed flap movement; a command without movement does not establish the cue.
Hoe ver autopilootcommando's de stick fysiek mogen bewegen. Piepklein gehouden in MSFS, waar een bewogen as kan worden teruggelezen als pilooteninvoer; nul schakelt volgen volledig uit.
Meer: de autopiloot beweegt je stick zichtbaar meer.
Minder: een nauwelijks merkbaar volgen.
Waarom hier: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Whether this feature is active in this profile.
Waarom hier: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Whether this feature is active in this profile.
Waarom hier: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Whether this feature is active in this profile.
Waarom hier: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
Whether this feature is active in this profile.
Waarom hier: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Whether this feature is active in this profile.
Waarom hier: Enables rate damping with the configured coefficients and control law.
Whether this feature is active in this profile.
Waarom hier: Autopilot following is off; the configured spring and load retain the hardware feel.
Whether this feature is active in this profile.
Waarom hier: Permits centering hold during a supported AP state, separate from following a moving target.
Waarom hier: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Whether this feature is active in this profile.
Waarom hier: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Where this effect reaches full strength (or has fully faded, for washouts).
Meer: a more gradual build to a later peak.
Minder: a quicker build.
Waarom hier: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Where this effect begins fading in.
Meer: the effect begins later.
Minder: it begins earlier.
Waarom hier: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Whether this feature is active in this profile.
Waarom hier: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Whether this feature is active in this profile.
Waarom hier: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Whether this feature is active in this profile.
Waarom hier: Enables engine cues with nonzero settings and valid running-engine telemetry.
Whether this feature is active in this profile.
Waarom hier: Enables accessory cues with configured strengths and observed accessory movement.
The strength of this effect.
Meer: a stronger effect.
Minder: a weaker one.
Waarom hier: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
| Parameter | Waarde | Wat het regelt en waarom |
|---|---|---|
| Spring strength | 0.8 | This profile uses powered-control feel for Boeing 727. The baseline spring is 0.8. Low-speed spring blending is off. |
| Force gain | 0.25 | The aerodynamic-load gain is 0.25 with an indicated-speed reference of 250 KIAS. The hydraulic-load factor of 0.45 scales that modeled term; it is a selected artificial-feel approximation. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| Elevator force scale | 0.86 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Aileron force scale | 0.7 | Roll and pitch aerodynamic scales are 0.7 and 0.86, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Snelheid voor krachtafstemming | 250 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Spring wake-up speed | 20 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 70 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| StickFeel · Trim feel enabled | False | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | False | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot · Neutral hold enabled | False | Permits centering hold during a supported AP state, separate from following a moving target. |
| Spring deadband | 0.04 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Dynamic-pressure blend | False | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.55 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Airspeed spring stiffening | 0 | The high-speed spring-stiffening gain is 0. No additional speed-driven stiffening is added; this does not disable independent aerodynamic loading. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| StickFeel · Elevator authority | 0 | The profile uses the trim behaviour configured below. Pitch relief is off, with stored authority 0; roll authority is 0. |
| StickFeel · Aileron authority | 0 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · G load enabled | True | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | True | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow authority | 0.1 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold strength | 0.6 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.3 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 6 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.9 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | True | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0.4 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0.32 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0.9 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | True | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0.06 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0.12 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0.12 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Zegt jouw ervaring op het type dat deze pagina iets fout heeft? Corrigeer het hier.
Deze pagina is gebouwd op geciteerde bronnen, en echte ervaring op het type verslaat elke bron. Citeer de foute bewering en vertel ons wat het echte toestel doet. Correcties gaan ter beoordeling naar de maintainer en voeden de volgende revisie van dit onderzoek.
Open gesprek over het vliegen en afstellen van de Boeing 727, op het communityforum. Correcties hierboven gaan privé naar de maintainer; hangarpraat is openbaar.