VliegtuigbibliotheekAirbus A220-300
Airbus A220-300Romain COUPY · CC BY-SA 4.0 · Airbus A220-300.

Airbus A220-300

The longer A220 variant with sidestick controllers and fly-by-wire controls.
Airliner2 profielkeuzes

Ken het vliegtuig

Airbus describes the A220-300 as the longer member of the A220 family. Sidestick controllers command a fly-by-wire system with normal and direct modes. The real-aircraft guide describes different trim behaviour between these modes.

Airbus A220-300

Variant
A220-300↗
Control system
Sidesticks · normal and direct fly-by-wire modes↗

Meer over dit vliegtuig op AirframeDB

Becoming the A220

Airbus became the programme’s majority partner in 2018 and brought the aircraft into its product range as the A220. The change in programme ownership and name did not turn it into an A320 derivative: its development lineage remains the C Series.

Controls and equipment

In normal mode, pilot trim requests change trim speed, while automatic trim offloads the elevators. In direct mode, trim commands the horizontal stabiliser; modes can differ by axis. The guide cautions that its real-aircraft descriptions may differ from Synaptic's simulation.

Openbare bronnen 2
  1. Airbus A220-300 — aircraft documentationA220 pilot guide · edited 15 July, pages 1–2, 38 and 64–67
  2. A220 family: programme historyManufacturer account of the C Series / A220 programme

Hoe het profiel het modelleert

Airbus A220-300

Free + Pro
MSFS 2020MSFS 2024X-Plane 12

The longer A220 variant with sidestick controllers and fly-by-wire controls.

The spring stays independent of airspeed. Directed aerodynamic loading is omitted.

Pitch-trim relief is off. Autopilot following is off.

Deze exacte revisie is nog niet beschikbaar voor openbare installatie.

Aircraft and configuration

Airbus describes the A220-300 as the longer A220 variant with sidestick controllers and two-mode fly-by-wire controls.

cockpits

Controls and equipment

In normal mode, pilot trim requests change trim speed, while automatic trim offloads the elevators. In direct mode, trim commands the horizontal stabiliser; modes can differ by axis. The guide cautions that its real-aircraft descriptions may differ from Synaptic's simulation.

Airbus A220-300 — aircraft documentation

About the values

Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.

Master gain & control system

Master gain85%

De uiteindelijke totaalschaal over alles wat het model produceert, vóór de apparaatbegrenzing.

Meer: alles (veer, belastingen, effecten) wordt samen sterker.

Minder: alles wordt samen zachter.

Waarom hier: Scales overall profile strength while preserving effect balance, subject to device and output limits.

Forces

Spring strength55%

De basiscentreerkracht die de stick terug naar het midden trekt. Elke andere kracht stapelt hierop. Te laag en de stick voelt slap in normale vlucht; te hoog en hij vecht tegen je hand en maskeert de kleinere signalen erbovenop.

Meer: een steviger centreren dat de hand meer weerstaat.

Minder: een slappere stick die alleen op aerodynamische belasting leunt.

Waarom hier: Control system: Sidesticks · normal and direct fly-by-wire modes. The baseline spring is 0.55. Low-speed spring blending is off.

Airbus A220-300 — aircraft documentation
Overall aerodynamic load4%

Een masterschaal over beide aangehouden asbelastingen, toegepast vóór hun onafhankelijke balans. Profielen laten dit normaal met rust en stemmen de twee asbelastingen af.

Meer: beide assen laden zwaarder.

Minder: beide assen worden samen lichter.

Waarom hier: The stored 0.04 aerodynamic-load gain is inactive under the fixed-centre control law.

Max output force55%

Een plafond op elke gestage pitch- of rolkracht voordat die het apparaat bereikt, ter bescherming tegen beuken of verzadigen van de hardware bij stevige manoeuvres.

Meer: hogere gestage krachtpieken vóór afkapping.

Minder: een zachter plafond; harde manoeuvres vlakken eerder af.

Waarom hier: Caps directed-force output. Native spring effects and device limits remain separate.

Elevator load100%

De aangehouden pitchbelasting uit hoogteroeruitslag en snelheid, onafhankelijk van rol gebalanceerd. Dit is de hoofdhendel achter het pitchgewicht van een type. Hij raakt rolroer-, veer-, trim- of buffetkrachten niet.

Meer: zwaardere aangehouden pitchkrachten op snelheid.

Minder: een lichter hoogteroer, minder spierkracht om vast te houden.

Waarom hier: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.

Aileron load100%

De aangehouden rolbelasting uit rolroeruitslag en snelheid, onafhankelijk van pitch gebalanceerd. Samen met de hoogteroerbelasting bepaalt dit de stuurharmonie waar recensenten het over hebben.

Meer: zwaardere rolkrachten.

Minder: lichtere, levendigere rolroeren.

Waarom hier: Roll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance.

Snelheid voor krachtafstemming220

De aangewezen snelheid waarbij de aerodynamische belasting haar ontworpen volle niveau bereikt. Hij verankert de hele belastingscurve aan het echte snelheidsbereik van het vliegtuig: een 172 laadt op tegen 110 knopen, een jet veel later.

Meer: belastingen komen later; de stick blijft langer licht.

Minder: belastingen komen eerder en de kruisvlucht weegt zwaarder.

Waarom hier: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.

Spring engagement start20 kt

De snelheid waarbij de veer vanaf zijn lage-snelheidsvloer richting volle sterkte begint te klimmen: de besturing die 'tot leven komt' tijdens de startrol.

Waarom hier: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.

Spring engagement full90 kt

De snelheid waarbij de veer volle sterkte bereikt. Tussen het begin en dit punt wordt het centreren geleidelijk steviger naarmate de luchtstroom over de roeren groeit.

Waarom hier: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.

Spring deadband1%

Een kleine neutrale zone rond het midden waar de veer stil blijft, zodat minieme bewegingen in rust niet ratelen. Breder is rustiger maar losser; smaller is preciezer maar kan rond het midden trillen.

Meer: een rustiger maar losser midden, met meer speling.

Minder: een strakker midden dat in rust kan trillen.

Waarom hier: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.

Forces · Center starting force0.03

Waarom hier: The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim.

Forces · Center starting force transition0.05

Waarom hier: Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual.

Airspeed blendingFalse

Schakelt het lage-snelheidsvenster van de veeraangrijping in (start/vol-knopen hierboven). Uit betekent een constante veer op alle snelheden.

Waarom hier: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.

Low-speed spring floor50%

Hoeveel van de veer overleeft bij stilstand, voordat luchtsnelheid aerodynamische kracht kan opbouwen. Een hoge vloer houdt de geparkeerde stick stevig; een lage geeft het losse, kabelslappe gevoel van een geparkeerd licht vliegtuig.

Meer: een stevigere stick geparkeerd en tijdens taxiën.

Minder: een slappe stick geparkeerd die pas met snelheid ontwaakt.

Waarom hier: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.

Centre firmness vs speed0%

Hoeveel het centreren zelf met snelheid verstijft, bovenop de uitslagbelastingen. Nul houdt het middengevoel constant; meer laat de stick harder centreren op kruissnelheid en losser in het circuit.

Meer: een midden dat duidelijk verhardt met snelheid.

Minder: een constant middengevoel op elke snelheid.

Waarom hier: Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase.

Centre stiffening cap5

De bovengrens van snelheidsgedreven centreerverstijving, zodat zeer snelle vlucht de veer niet onbegrensd kan opwinden.

Meer: meer totale verstijving toegestaan op hoge snelheid.

Minder: de verstijving stopt eerder.

Waarom hier: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.

Trim

Trim relief (elevator)0%

Hoe sterk hoogteroertrim de vastgehouden pitchkracht verlicht en verschuift waar de stick tot rust komt. Op 100 % heeft een goed getrimd vliegtuig geen vastgehouden druk nodig, de trim-de-last-weg-werkwijze van echt vliegen.

Meer: trim neemt meer vastgehouden kracht weg; op 100 % heft volle trim hem op.

Minder: je blijft kracht houden, zelfs getrimd.

Waarom hier: In normal mode, pilot trim requests change trim speed, while automatic trim offloads the elevators. Pitch relief is off, with stored authority 0; roll authority is 0.

Airbus A220-300 — aircraft documentation
Trim relief (aileron)0%

Dezelfde verlichting voor roltrim. De meeste GA-types hebben geen echte rolroertrim, dus dit blijft op nul; types met roltrim krijgen een passende waarde.

Meer: roltrim neemt meer vastgehouden kracht weg.

Minder: roltrim doet minder.

Waarom hier: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.

Effect gains · Ground

Runway rumble0%

Rollende oppervlaktetrilling uit wielsnelheid en ondergrondtype: asfalt, gras of grind onder het onderstel.

Meer: een sterkere oppervlaktetextuur in de stick.

Minder: gladder taxiën.

Waarom hier: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.

Gear bumps0%

Korte losse stoten van uitzetvoegen, sporen en ruw oppervlak, die het doorlopende gerommel accentueren.

Meer: scherpere stoten van voegen en sporen.

Minder: zachtere gronddetails.

Waarom hier: Sets gear-bump texture during ground motion, separate from touchdown impact.

Effect gains · Airframe

Stall buffet6%

Casco-schudden bij het naderen van de overtrek en terwijl de overtrekwaarschuwing actief is: hoe luid deze vleugel aankondigt dat hij ontevreden is. Types met een scherpe afbreek krijgen bescheiden buffet en laten de hoorn de waarschuwing dragen.

Meer: een sterker trillen vóór de overtrek.

Minder: een discretere vleugel; de hoorn draagt de waarschuwing.

Waarom hier: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.

Mach buffet6%

Transsoon buffet bij het naderen van de Machlimiet. Betekenisvol voor jets nabij MMO, nul voor zuigers en turboprops die er nooit komen.

Meer: een sterker transsoon buffet nabij de Machlimiet.

Minder: gladder vliegen op hoge Mach.

Waarom hier: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.

Flap buffet0%

Laagfrequente casco-trilling met kleppen uitgeslagen in de luchtstroom, in het snelheidsvenster waar ze de lucht echt bewerken.

Meer: ruwer vliegen met werkende kleppen.

Minder: zachtere naderingskleppen.

Waarom hier: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.

Gear buffet0%

Casco-getrommel van intrekbaar onderstel dat in de luchtstroom hangt. Nul voor types met vast onderstel, waar het casco nooit van vorm verandert.

Meer: meer getrommel met het onderstel uit.

Minder: schoner vliegen met onderstel uit.

Waarom hier: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.

Stick shaker50%

De speciale stall-stickshakerzoem, geactiveerd door het eigen overtrekwaarschuwingssysteem van het vliegtuig. Alleen types met een echte shaker krijgen een waarde; de rest steunt op aerodynamisch buffet en de hoorn.

Meer: een hardere shaker.

Minder: een discretere shaker.

Waarom hier: Sets triggered shaker strength; inactive while the shaker feature is disabled.

Effect gains · Engine, mechanical & drag

Touchdown thump0%

De eenmalige dreun als de wielen de baan raken, geschaald op daalsnelheid: een zachte landing fluistert, een stevige aankomst bonkt.

Meer: een hardere dreun bij de landing.

Minder: zachtere aankomsten.

Waarom hier: Sets landing-impact strength; landing telemetry and response shape determine the pulse.

Reverse rumble0%

Uitroltrilling terwijl reverse thrust of props in beta werken. Nul voor types zonder reverse.

Meer: ruwer uitrollen onder reverse.

Minder: een discretere reverse.

Waarom hier: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.

Engine rumble0%

Doorlopende motortrilling die het toerental volgt tussen stationair en vol vermogen, de altijd aanwezige herinnering dat er voorin iets brandstof verbrandt.

Meer: meer motor in de stick.

Minder: een discretere motor.

Waarom hier: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.

Flap motion0%

Doorlopende trilling alleen terwijl de sim meldt dat de klepvlakken daadwerkelijk bewegen. Volgt echte actuatorbeweging en storingen, geen geschatte timer.

Meer: meer trilling met bewegende kleppen.

Minder: discretere klepbewegingen.

Waarom hier: Sets texture from observed flap movement; a command without movement does not establish the cue.

Autopilot follow

AP follow authority5%

Hoe ver autopilootcommando's de stick fysiek mogen bewegen. Piepklein gehouden in MSFS, waar een bewogen as kan worden teruggelezen als pilooteninvoer; nul schakelt volgen volledig uit.

Meer: de autopiloot beweegt je stick zichtbaar meer.

Minder: een nauwelijks merkbaar volgen.

Waarom hier: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.

Stick feel

StickFeel · Trim feel enabledFalse

Whether this feature is active in this profile.

Waarom hier: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.

StickFeel · Trim relief enabledFalse

Whether this feature is active in this profile.

Waarom hier: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.

StickFeel · Force trim enabledFalse

Whether this feature is active in this profile.

Waarom hier: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.

StickFeel · G load enabledFalse

Whether this feature is active in this profile.

Waarom hier: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.

StickFeel · Rate damping enabledFalse

Whether this feature is active in this profile.

Waarom hier: Enables rate damping with the configured coefficients and control law.

Autopilot

Autopilot · Follow enabledFalse

Whether this feature is active in this profile.

Waarom hier: Autopilot following is off; the configured spring and load retain the hardware feel.

Autopilot · Neutral hold enabledFalse

Whether this feature is active in this profile.

Waarom hier: Permits centering hold during a supported AP state, separate from following a moving target.

Autopilot · Neutral hold strength0.28

Waarom hier: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.

Spring response

SpringResponse · Travel enabledTrue

Whether this feature is active in this profile.

Waarom hier: Applies the configured pitch and roll spring travel curves.

SpringResponse · Output1

Waarom hier: Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel.

SpringResponse · Output0.3

Waarom hier: Sets response at the second roll-curve point; its input position and other points determine the travel law.

Aero

Aero · EnabledTrue

Whether this feature is active in this profile.

Waarom hier: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.

Aero · Max flap index5

Where this effect reaches full strength (or has fully faded, for washouts).

Meer: a more gradual build to a later peak.

Minder: a quicker build.

Waarom hier: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.

Aero · Min flap index2

Where this effect begins fading in.

Meer: the effect begins later.

Minder: it begins earlier.

Waarom hier: Sets the first flap detent that admits buffet; this is a handle index, not degrees.

Aero · Shaker enabledFalse

Whether this feature is active in this profile.

Waarom hier: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.

Ground

Ground · EnabledFalse

Whether this feature is active in this profile.

Waarom hier: Enables ground effects; each still needs its own strength and contact or motion telemetry.

Engine

Engine · EnabledFalse

Whether this feature is active in this profile.

Waarom hier: Enables engine cues with nonzero settings and valid running-engine telemetry.

Mechanical

Mechanical · EnabledTrue

Whether this feature is active in this profile.

Waarom hier: Enables accessory cues with configured strengths and observed accessory movement.

Mechanical · Gain0

The strength of this effect.

Meer: a stronger effect.

Minder: a weaker one.

Waarom hier: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.

Alle profielinstellingen
Geschatte profielinstellingen
ParameterWaardeWat het regelt en waarom
Spring strength0.55 Control system: Sidesticks · normal and direct fly-by-wire modes. The baseline spring is 0.55. Low-speed spring blending is off.
Force gain0.04 The stored 0.04 aerodynamic-load gain is inactive under the fixed-centre control law.
Master gain0.85 Scales overall profile strength while preserving effect balance, subject to device and output limits.
Maximum output force0.55 Caps directed-force output. Native spring effects and device limits remain separate.
Elevator force scale1 Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Aileron force scale1 Roll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance.
Snelheid voor krachtafstemming220 ktSets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Spring wake-up speed20 ktSets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring full-strength speed90 ktSets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
StickFeel · Trim feel enabledFalse Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledFalse Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Force trim enabledFalse Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
Autopilot · Follow enabledFalse Autopilot following is off; the configured spring and load retain the hardware feel.
Autopilot · Neutral hold enabledFalse Permits centering hold during a supported AP state, separate from following a moving target.
Spring deadband0.01 Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Forces · Center starting force0.03 The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim.
Forces · Center starting force transition0.05 Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual.
Dynamic-pressure blendFalse Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Minimum spring factor0.5 Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Airspeed spring stiffening0 Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase.
Airspeed stiffening cap5 Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
SpringResponse · Travel enabledTrue Applies the configured pitch and roll spring travel curves.
SpringResponse · Output1 Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel.
SpringResponse · Output0.3 Sets response at the second roll-curve point; its input position and other points determine the travel law.
StickFeel · Elevator authority0 In normal mode, pilot trim requests change trim speed, while automatic trim offloads the elevators. Pitch relief is off, with stored authority 0; roll authority is 0.
StickFeel · Aileron authority0 Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
StickFeel · G load enabledFalse Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledFalse Enables rate damping with the configured coefficients and control law.
Autopilot · Follow authority0.05 Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot · Neutral hold strength0.28 Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero · EnabledTrue Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Gain0.06 Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Aero · Gain0.06 Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Aero · Gain0 Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Aero · Max flap index5 Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index2 Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Gain0 Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Aero · Shaker enabledFalse Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Aero · Amplitude0.5 Sets triggered shaker strength; inactive while the shaker feature is disabled.
Ground · EnabledFalse Enables ground effects; each still needs its own strength and contact or motion telemetry.
Ground · Gain0 Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Ground · Gain0 Sets gear-bump texture during ground motion, separate from touchdown impact.
Ground · Gain0 Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Ground · Gain0 Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine · EnabledFalse Enables engine cues with nonzero settings and valid running-engine telemetry.
Engine · Gain0 Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Mechanical · EnabledTrue Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0 Sets texture from observed flap movement; a command without movement does not establish the cue.
Mechanical · Gain0 Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Openbare bronnen 3
  1. Airbus A220-300 — aircraft documentationA220 pilot guide · edited 15 July, pages 1–2, 38 and 64–67
  2. cockpitsAirbus A220-300
  3. A220 family: programme historyManufacturer account of the C Series / A220 programme

Community en correcties

Zegt jouw ervaring op het type dat deze pagina iets fout heeft? Corrigeer het hier.

Pilotencorrecties

Vlieg je dit toestel? Corrigeer deze pagina.

Deze pagina is gebouwd op geciteerde bronnen, en echte ervaring op het type verslaat elke bron. Citeer de foute bewering en vertel ons wat het echte toestel doet. Correcties gaan ter beoordeling naar de maintainer en voeden de volgende revisie van dit onderzoek.

Hangarpraat

Open gesprek over het vliegen en afstellen van de Airbus A220-300, op het communityforum. Correcties hierboven gaan privé naar de maintainer; hangarpraat is openbaar.

Nog geen hangarpraat over de Airbus A220-300. Wees de eerste.

Community

Communityprofielen voor dit toestel

Nog geen communityprofielen voor dit toestel. Op jouw manier afgesteld? Deel een profiel en het verschijnt hier.