A trainer with motorglider roots
Diamond’s early aircraft family grew from the composite HK36 Super Dimona motorglider. Its timeline places the DV20 Katana’s maiden flight in 1991, bringing that design background into a compact two-seat aeroplane.
Biblioteca de aeronavesDiamond DA20 / DV20
bomberpilot · CC BY-SA 2.0 · Diamond DA20 picturedDiamond DA20 / DV20
A two-seat composite trainer with a low wing and a large canopy.
General aviation6 opções de perfil
Conheça o avião
The Katana began as an Austrian Diamond design and developed into the DV20 and DA20 families. The compact side-by-side cockpit, fixed landing gear and T-tail make a recognisable training-aircraft layout. Different developments use different engines and associated equipment.
The DA20 differs from the four-seat DA40 and earlier Katana variants. Model suffixes identify the engine installations described in the manuals.
Mais sobre esta aeronave no AirframeDB
Austria and Canada in the same family
Diamond established its Canadian operation in London, Ontario, in 1992 and introduced the DA20 to the market. The Austrian DV20 and Canadian DA20 names belong to this shared development story; engine and equipment differences still matter when reading individual pilot accounts.
The view that made training memorable
Greenspun remembers the Katana’s canopy as its greatest attraction: the low wing and wide view made him feel immersed in the sky. His training aircraft could also be pleasantly quiet with the propeller turning more slowly. On the ground, steering with differential braking took practice, and the small cockpit left him close enough to his instructor for their harness routines to collide.
Longer flights revealed compromises. The reclined seat encouraged him to crane forward, leaving his neck uncomfortable, and he found some instruments difficult to read at night. Although he enjoyed training in the Katana, he eventually bought a DA40 for its additional capabilities and rear seats. Making room for his dog Alex was part of that decision.
A glider instructor meets a familiar-looking wing
Kasprzyk came to the Katana through a gliding connection. Long wanted a refresher after limited recent flying, and the two began with a detailed inspection of the newly serviced aircraft. Kasprzyk liked the shoulder and legroom, although his large feet felt cramped near the pedals. Keeping straight while taxiing with differential braking was initially humbling.
Long flew the first circuit before Kasprzyk took the controls. In gusty conditions he found that small stick movements were enough to correct the aircraft, and the canopy helped him follow traffic around Arlington’s busy runways. A long final gave him time to settle the approach before a soft-field landing. He left enthusiastic about the handling and curious to try the aircraft’s glider-like wing in thermals on another flight.
A visiting reporter gets a student’s checkride
Marsh approached his visit as a chance to experience the pressure placed on an Air Force screening student. He studied the procedures and memorised nearly all the aircraft figures he was given. Early manoeuvres went well, including steep turns and a landing that benefited from watching D’Amico’s demonstration. The instructor’s occasional compliments made the exercise feel encouraging.
Returning to Pueblo exposed how quickly the task could unravel. Marsh lined up with the wrong parallel runway, then misjudged a simulated forced landing and needed the instructor to intervene as speed increased. His eventual touchdown was smooth, but that did not erase the earlier mistakes. He finished with a self-deprecating keepsake for D’Amico and a memorable lesson in the difference between handling an aircraft and managing the whole flight.
Fontes públicas 14
- Diamond DA20 KatanaResearch background · Wikipedia revision 954579312 · retrieved 2026-09-12
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- MSFS 2020 FAQ and edition aircraft inventory
- DA20-C1 EclipseOfficial developer / designated store catalogue · checked 2026-09-12
- Diamond Katana Review — DA20-A1 Rotax-poweredMarch 2002 · author’s training experience
- Flying the Diamond DA20 — Mar 2021March 2021 · DA20-A1 flight with Nick Long
- Solo!Alton K. Marsh · 1 October 2008
- History: Unwavering Commitment to InnovationManufacturer’s historical timeline · retrieved September 2026
- Release Notes — Sim Update 2 [1.4.20.0]15 May 2025 · aircraft-specific package revisions
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- SimSolutions DA20-C1 for MSFS-2020 – iniBuilds StoreProduct listing captured 2026-09-30; edition scope from the reviewed catalogue
- DA20-C1 Eclipse-SimSolutions-DA20CProduct listing captured 2026-09-23; edition scope from the reviewed catalogue
- Diamond Katana DA20 C1-xhangar-DA20Product listing captured 2026-09-23; edition scope from the reviewed catalogue
Como o perfil o modela
Diamond DV20 Katana
Free + ProMSFS 2020MSFS 2024X-Plane 12
The Katana began as an Austrian Diamond design and developed into the DV20 and DA20 families. The compact side-by-side cockpit, fixed landing gear and T-tail make a recognisable training-aircraft layout. Different developments use different engines and associated equipment.
This starting point selects Diamond DV20 Katana. Its aircraft-level settings do not select a particular developer’s custom systems.
The spring-preload trim mechanism accompanies reversible primary controls. Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
DA20 pitch trim changes spring preload on the elevator linkage. Valid trim provides the configured pressure relief. Autopilot following is off.
Controls and trim
The DA20-C1 uses elevator and aileron pushrods with a cable-operated rudder. Electric pitch trim loads a spring assembly on the elevator pushrod, rather than driving an external trim tab. The C1’s Continental engine and cockpit options are separate from the Rotax-powered A1.
About the values
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
Master gain & control system
Master gain85%
A escala final de saída aplicada a tudo que o modelo produz, antes do teto do dispositivo.
Mais: tudo (mola, cargas, efeitos) fica mais forte junto.
Menos: tudo amacia junto.
Por que aqui: Scales overall profile strength while preserving effect balance, subject to device and output limits.
Forces
Spring strength74%
A força base de centragem que puxa o manche de volta ao centro. Todas as outras forças se empilham sobre ela. Baixa demais e o manche parece frouxo em voo normal; alta demais e ele briga com sua mão e mascara os sinais menores por cima.
Mais: uma centragem mais firme que resiste mais à mão.
Menos: um manche mais mole que depende só da carga aerodinâmica.
Por que aqui: The spring-preload trim mechanism accompanies reversible primary controls. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 55 KIAS.
DA20-C1 EclipseDA20-C1 manufacturer maintenance manual rev22DA20-C1 Eclipse-SimSolutions-DA20CDiamond DA20C1 AFM revision29 hosted by operatorSimSolutions DA20-C1 for MSFS-2020Exact product, simulator declarations and configuration featuresCurrent X-Hangar version updatesRelease Notes — Sim Update 2 [1.4.20.0]Spring deadband4%
Uma pequena zona neutra ao redor do centro onde a mola fica quieta, para que movimentos mínimos em repouso não trepidem. Mais larga é mais calma porém mais solta; mais estreita é mais precisa mas pode tremer no centro.
Mais: um centro mais calmo porém mais solto, com mais folga.
Menos: um centro mais apertado que pode tremer em repouso.
Por que aqui: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Overall aerodynamic load80%
Uma escala mestra sobre as duas cargas sustentadas de eixo, aplicada antes do balanço independente delas. Os perfis normalmente a deixam quieta e ajustam as duas cargas de eixo.
Mais: os dois eixos carregam mais forte.
Menos: os dois eixos aliviam juntos.
Por que aqui: The aerodynamic-load gain is 0.8 with an indicated-speed reference of 110 KIAS. This supplies speed-dependent loading alongside the spring.
Airspeed blendingTrue
Ativa a janela de engate da mola em baixa velocidade (nós de início/pleno acima). Desligado, a mola é constante em todas as velocidades.
Por que aqui: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Low-speed spring floor50%
Quanto da mola sobrevive parado, antes que a velocidade possa gerar força aerodinâmica. Um piso alto mantém o manche estacionado firme; um piso baixo dá a sensação solta, de cabos com folga, de um avião leve estacionado.
Mais: um manche mais firme estacionado e no táxi.
Menos: um manche mole estacionado que só desperta com velocidade.
Por que aqui: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring engagement start15.4 kt
A velocidade em que a mola começa a subir do piso de baixa velocidade rumo à força plena: os comandos "ganhando vida" na corrida de decolagem.
Por que aqui: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring engagement full55.0 kt
A velocidade em que a mola atinge força plena. Entre o início e este ponto, a centragem endurece progressivamente à medida que o fluxo de ar cresce sobre os comandos.
Por que aqui: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Velocidade de ajuste de força110
A velocidade indicada em que a carga aerodinâmica atinge seu nível pleno de projeto. Ela ancora toda a curva de carga à faixa real de velocidades do avião: um 172 carrega por volta de 110 nós, um jato bem depois.
Mais: as cargas chegam mais tarde; o manche fica leve até mais velocidade.
Menos: as cargas chegam antes e o cruzeiro pesa mais.
Por que aqui: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Centre firmness vs speed15%
Quanto a própria centragem endurece com a velocidade, além das cargas de deflexão. Zero mantém a sensação de centro constante; mais faz o manche centrar mais duro em cruzeiro e mais solto no circuito.
Mais: um centro que endurece nitidamente com a velocidade.
Menos: uma sensação de centro constante em qualquer velocidade.
Por que aqui: The high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 55 KIAS, with the squared-speed ratio capped at 5.
Centre stiffening cap5
O limite superior do endurecimento de centro pela velocidade, para que voos muito rápidos não tensionem a mola sem freio.
Mais: mais endurecimento total permitido em alta velocidade.
Menos: o endurecimento corta antes.
Por que aqui: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron load72%
A carga sustentada de rolagem da deflexão dos ailerons e da velocidade, balanceada independentemente da arfagem. Junto com a carga do profundor define a razão de harmonia de comandos de que falam as resenhas.
Mais: esforços de rolagem mais pesados.
Menos: ailerons mais leves e vivos.
Por que aqui: Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator load100%
A carga sustentada de arfagem da deflexão do profundor e da velocidade, balanceada independentemente da rolagem. É a alavanca principal por trás do peso de arfagem de um tipo. Não toca aileron, mola, compensador nem forças de buffet.
Mais: esforços sustentados de arfagem mais pesados em velocidade.
Menos: um profundor mais leve, com menos músculo para segurar.
Por que aqui: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Max output force55%
Um teto sobre cada força estável de arfagem ou rolagem antes de chegar ao dispositivo, protegendo contra pancadas ou saturação do hardware em manobras fortes.
Mais: picos de força estável mais altos antes do corte.
Menos: um teto mais suave; manobras duras achatam antes.
Por que aqui: Caps directed-force output. Native spring effects and device limits remain separate.
Trim
Trim relief (elevator)30%
Com que força o compensador de profundor alivia o esforço de arfagem mantido e desloca onde o manche assenta. Em 100 %, um avião bem compensado não precisa de pressão mantida: o fluxo de trabalho de compensar-a-carga do voo real.
Mais: o compensador tira mais esforço mantido; em 100 %, todo compensado o anula.
Menos: você segue segurando esforço mesmo compensado.
Por que aqui: DA20 pitch trim changes spring preload on the elevator linkage. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.
DA20-C1 EclipseDA20-C1 manufacturer maintenance manual rev22DA20-C1 Eclipse-SimSolutions-DA20CDiamond DA20C1 AFM revision29 hosted by operatorSimSolutions DA20-C1 for MSFS-2020Exact product, simulator declarations and configuration featuresCurrent X-Hangar version updatesRelease Notes — Sim Update 2 [1.4.20.0]Trim relief (aileron)0%
O mesmo alívio para o compensador de rolagem. A maioria dos tipos de aviação geral não tem compensador de aileron real, então isto fica em zero; tipos com compensador de rolagem recebem um valor correspondente.
Mais: o compensador de rolagem tira mais esforço mantido.
Menos: o compensador de rolagem faz menos.
Por que aqui: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Effect gains · Ground
Runway rumble40%
Vibração de rolagem no solo pela velocidade das rodas e tipo de superfície: asfalto, grama ou cascalho sob o trem.
Mais: uma textura de superfície mais forte no manche.
Menos: um táxi mais liso.
Por que aqui: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Gear bumps25%
Solavancos curtos e discretos de juntas de dilatação, sulcos e superfície irregular, pontuando o ronco contínuo.
Mais: solavancos mais nítidos de juntas e sulcos.
Menos: detalhes de solo mais suaves.
Por que aqui: Sets gear-bump texture during ground motion, separate from touchdown impact.
Effect gains · Airframe
Stall buffet35%
Sacudida da célula ao se aproximar do estol e enquanto o aviso soa: quão alto esta asa anuncia que está infeliz. Tipos de quebra seca recebem buffet modesto e deixam a buzina levar o aviso.
Mais: um tremor pré-estol mais forte.
Menos: uma asa mais discreta; a buzina leva o aviso.
Por que aqui: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Mach buffet0%
Buffet transônico ao se aproximar do limite de Mach. Significativo para jatos perto de MMO, zero para pistões e turboélices que nunca chegam lá.
Mais: um buffet transônico mais forte perto do limite de Mach.
Menos: um voo mais liso em Mach alto.
Por que aqui: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Flap buffet14%
Vibração de baixa frequência da célula com flapes estendidos no fluxo, na janela de velocidade em que eles realmente trabalham o ar.
Mais: um voo mais áspero com flapes trabalhando.
Menos: flapes de aproximação mais suaves.
Por que aqui: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Gear buffet0%
Tamborilar da célula pelo trem retrátil pendurado na corrente de ar. Zero para tipos de trem fixo, onde a célula nunca muda de forma.
Mais: mais tamborilar com o trem embaixo.
Menos: um voo com trem embaixo mais limpo.
Por que aqui: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Stick shaker50%
O zumbido dedicado do stick shaker de estol, disparado pelo próprio sistema de aviso do avião. Só tipos com shaker real recebem valor; o resto confia no buffet aerodinâmico e na buzina.
Mais: um shaker mais duro.
Menos: um shaker mais discreto.
Por que aqui: Sets triggered shaker strength; inactive while the shaker feature is disabled.
Effect gains · Engine, mechanical & drag
Touchdown thump65%
O golpe único quando as rodas tocam a pista, escalado pela razão de descida: um pouso macio sussurra, uma chegada firme bate.
Mais: um golpe mais duro no toque.
Menos: chegadas mais suaves.
Por que aqui: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Reverse rumble0%
Vibração na corrida enquanto o reverso ou as hélices em beta trabalham. Zero para tipos sem reverso.
Mais: uma corrida mais áspera sob reverso.
Menos: um reverso mais discreto.
Por que aqui: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine rumble12%
Vibração contínua do grupo motopropulsor seguindo a rotação entre marcha lenta e potência máxima, o lembrete sempre presente de que algo queima combustível lá na frente.
Mais: mais motor no manche.
Menos: um motor mais discreto.
Por que aqui: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Flap motion12%
Vibração contínua apenas enquanto o simulador informa as superfícies de flape realmente em movimento. Segue o movimento e as falhas reais do atuador, não um cronômetro estimado.
Mais: mais vibração com os flapes em movimento.
Menos: cursos de flape mais discretos.
Por que aqui: Sets texture from observed flap movement; a command without movement does not establish the cue.
Autopilot follow
AP follow authority10%
Quanto os comandos do piloto automático podem mover fisicamente o manche. Mantido minúsculo no MSFS, onde um eixo movido pode ser lido de volta como entrada do piloto; zero desativa o seguimento por completo.
Mais: o piloto automático move seu manche visivelmente mais.
Menos: um seguimento quase imperceptível.
Por que aqui: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Stick feel
StickFeel · Trim feel enabledTrue
Whether this feature is active in this profile.
Por que aqui: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledTrue
Whether this feature is active in this profile.
Por que aqui: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Force trim enabledFalse
Whether this feature is active in this profile.
Por que aqui: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledTrue
Whether this feature is active in this profile.
Por que aqui: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledTrue
Whether this feature is active in this profile.
Por que aqui: Enables rate damping with the configured coefficients and control law.
Autopilot
Autopilot · Follow enabledFalse
Whether this feature is active in this profile.
Por que aqui: Autopilot following is off; the configured spring and load retain the hardware feel.
Autopilot · Neutral hold enabledFalse
Whether this feature is active in this profile.
Por que aqui: Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.6
Por que aqui: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero
Aero · EnabledTrue
Whether this feature is active in this profile.
Por que aqui: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Max flap index2
Where this effect reaches full strength (or has fully faded, for washouts).
Mais: a more gradual build to a later peak.
Menos: a quicker build.
Por que aqui: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index2
Where this effect begins fading in.
Mais: the effect begins later.
Menos: it begins earlier.
Por que aqui: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Shaker enabledFalse
Whether this feature is active in this profile.
Por que aqui: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Ground
Ground · EnabledTrue
Whether this feature is active in this profile.
Por que aqui: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Engine
Engine · EnabledTrue
Whether this feature is active in this profile.
Por que aqui: Enables engine cues with nonzero settings and valid running-engine telemetry.
Mechanical
Mechanical · EnabledTrue
Whether this feature is active in this profile.
Por que aqui: Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0
The strength of this effect.
Mais: a stronger effect.
Menos: a weaker one.
Por que aqui: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Todas as configurações do perfil
| Parâmetro | Valor | O que controla e por quê |
|---|---|---|
| Spring strength | 0.74 | The spring-preload trim mechanism accompanies reversible primary controls. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 55 KIAS. |
| Spring deadband | 0.045 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Force gain | 0.8 | The aerodynamic-load gain is 0.8 with an indicated-speed reference of 110 KIAS. This supplies speed-dependent loading alongside the spring. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | True | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.5 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 15.4 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 55.0 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Velocidade de ajuste de força | 110.0 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0.15 | The high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 55 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 0.72 | Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | 1.0 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| StickFeel · Trim feel enabled | True | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | True | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0.3 | DA20 pitch trim changes spring preload on the elevator linkage. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0. |
| StickFeel · Aileron authority | 0 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| StickFeel · G load enabled | True | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | True | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot · Follow authority | 0.1 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | False | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.6 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.35 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0.14 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 2 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | True | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0.4 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0.25 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0.65 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | True | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0.12 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0.12 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Fontes públicas 18
- Diamond DA20 KatanaResearch background · Wikipedia revision 954579312 · retrieved 2026-09-12
- DA20-C1 EclipseExact DA20 developer page: engine, avionics and platformOfficial developer / designated store catalogue · checked 2026-09-12
- DA20-C1 manufacturer maintenance manual rev22Diamond DA201-C1 AMM rev22, chapters27-30 and27-31, PDF pp.503 and511-513; trim chapter revision16
- DA20-C1 Eclipse-SimSolutions-DA20CXP12version1.0.1 August3,2023 and featuresProduct listing captured 2026-09-23; edition scope from the reviewed catalogue
- Diamond DA20C1 AFM revision29 hosted by operatorPDF182/printed7-6, revision26 page in revision29 AFM; image reviewed; DA20C1 AFM PDF182/printed7-6, common airframe mechanism
- SimSolutions DA20-C1 for MSFS-2020Exact product and reviewed configuration passagesProduct listing captured 2026-09-30; edition scope from the reviewed catalogue
- Exact product, simulator declarations and configuration featuresExact product, simulator declarations and configuration features
- Current X-Hangar version updates13March2026 C130/L100 v2.19 update; 18August2026 C404 v2.15; 11May2026 DA20C1 v1.65; Aztec v1.33 update; date printed07-30-06
- Release Notes — Sim Update 2 [1.4.20.0]15 May 2025 · simulator 1.4.20.0, Saab package 1.0.915 May 2025 · aircraft-specific package revisions
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- MSFS 2020 FAQ and edition aircraft inventory
- Diamond Katana Review — DA20-A1 Rotax-poweredMarch 2002 · author’s training experience
- Flying the Diamond DA20 — Mar 2021March 2021 · DA20-A1 flight with Nick Long
- Solo!Alton K. Marsh · 1 October 2008
- History: Unwavering Commitment to InnovationManufacturer’s historical timeline · retrieved September 2026
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- Diamond Katana DA20 C1-xhangar-DA20Product listing captured 2026-09-23; edition scope from the reviewed catalogue
Comunidade e correções
Se a sua experiência no tipo diz que esta página errou, corrija aqui.
Correções de pilotos
Voa esta aeronave? Corrija esta página.
Esta página é construída com referências citadas, e experiência real no tipo vale mais que citação. Cite a afirmação errada e conte o que a aeronave real faz. As correções vão ao mantenedor para revisão e alimentam a próxima revisão desta pesquisa.
Entre para enviar uma correção. Sem senha, só um link de e-mail de uso único.
Entrar
Papo de hangar
Conversa aberta sobre voar e ajustar o Diamond DA20 / DV20, no fórum da comunidade. As correções acima vão em particular ao mantenedor; o papo de hangar é público.
Entre para começar. Sem senha, só um link de e-mail de uso único.
Entrar
Comunidade
Perfis da comunidade para esta aeronave
Ainda não há perfis da comunidade para esta aeronave.
Ajustou do seu jeito? Compartilhe um perfil e ele aparecerá aqui.