Development milestones
First flight: 2 November 1992 ( 1992-11-02 )
Developed from: Airbus A300
Libreria dei velivoliAirbus A330 family
4300streetcar · CC BY 4.0 · Delta Air Lines A330-300Airbus A330 family
A long-haul twin whose family spans passenger, freight and specialist transport roles.
Airliner19 opzioni di profilo
Conosci l'aereo
Airbus developed the A330 alongside the four-engine A340. The two programmes shared substantial airframe and cockpit work, but the A330 used two engines. The initial A330-300 entered service in 1994; the shorter A330-200 followed in 1998.
The family includes several engine choices, different fuselage lengths and later A330neo developments. These distinctions reach inside the cockpit: engine indications and fuel arrangements are not identical across every version. The simulator products cover different variants, each with its own developer documentation.
Scopri di più su questo aeromobile su AirframeDB
Taking a twin-engine airliner to the Antarctic ice
Mirpuri's log describes the preparation behind Hi Fly's A330 mission from Cape Town to Wolf's Fang. The aircraft carried fuel for the return as well as the outward journey, and the team monitored fuel temperature, destination weather and runway condition throughout the flight. Forecast discussions began days beforehand. Ground power and starting equipment at the remote strip were also part of making the twin-engine operation possible.
Four pilots shared the long duty, supported by engineers, cabin crew, a ground coordinator and colleagues at both bases. Mirpuri recalls touching down just before midnight local time, when the Antarctic summer sun was still above the horizon and katabatic winds were beginning to rise. The aircraft stopped as planned, turned and taxied to parking before returning to Cape Town later. His airline-published account stresses the contribution of the whole team to a landing intended to feel uneventful.
A familiar flight deck and a sharper response on approach
Gerzanics flew the A330-800 test aircraft F-WTTO from Toulouse with Airbus test pilot Thomas Wilhelm. Although he did not routinely fly Airbus aircraft, the common cockpit felt familiar. The aircraft was still contributing to flight-control development, and a special display helped him practise the consistent sidestick input needed for the takeoff test. In the air, he found it easy to establish bank angles and roll out accurately on a heading.
On the return, the instrument landing system's glideslope went out of service. Wilhelm suggested using the head-up display while setting up an alternative ground-augmented satellite approach. Gerzanics then assessed the aircraft's response by deliberately offsetting from, and rejoining, the final approach course. He found the response crisp and the landing straightforward. This was an organised evaluation in an instrumented A330-800, including test manoeuvres.
Learning to wait for a larger aircraft’s response
After thirteen years flying the A320 family around Europe, Harder was preparing to return to long-haul work on the A330. He describes receiving the training assignment after applying for a conversion, then working through technical material at home before moving into procedural and full-flight simulators. His Airbus experience shortened part of the training, but the new aircraft still had different systems to learn.
Asked how the A330 felt in the simulator, he noticed a more delayed response to control inputs, reminding him of his earlier experience as a Boeing 747 first officer. He had to allow a little time for the larger aircraft to respond. At the time of the interview, his simulator check and line training still lay ahead. His conversion training took place in the simulator; he had not yet completed his A330 qualification.
Fonti pubbliche 21
- Airbus A330Research background · Wikipedia revision 1373820047 · retrieved 2026-09-12
- Airbus A330
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- Airbus Beluga XL
- Airbus A330-300 POH
- X-Plane 12 Desktop Manual
- X-Plane aircraft and avionics manuals
- A330-900 change log
- A330 900Official developer / designated store catalogue · checked 2026-09-12
- Captain’s log: landing the first Airbus A330 in AntarcticaCarlos Mirpuri · 5 December 2025
- The flight test of Airbus’s refreshed widebody – the A330neoMike Gerzanics · 2019
- Umschulung auf den Airbus A330 – Upgrade für einen KapitänClaus Harder · 5 May 2023
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- Aerosoft Aircraft A330 neoProduct listing captured 28 September 2026; A330-900neo, MSFS 2024
- A330-300Product listing captured 2026-09-24; edition scope from the reviewed catalogue
- A339X A330-900neoProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- JARDesign 330 Airliner -JARDesign-A330Product listing captured 2026-09-30; edition scope from the reviewed catalogue
- Airbus A330-200 exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- Airbus A330-300 exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- Airbus A330-900neo exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
Come il profilo lo modella
Airbus A330-300
Free + ProMSFS 2024X-Plane 11X-Plane 12
Airbus developed the A330 alongside the four-engine A340. The two programmes shared substantial airframe and cockpit work, but the A330 used two engines. The initial A330-300 entered service in 1994; the shorter A330-200 followed in 1998.
This starting point selects Airbus A330-300. Its aircraft-level settings do not select a particular developer’s custom systems.
The spring stays independent of airspeed. Directed aerodynamic loading is omitted.
Pitch-trim relief is off. Autopilot following is off.
Questa revisione esatta non è ancora abilitata per l’installazione pubblica.
Controls and trim
The A330 cockpit uses Airbus sidesticks and fly-by-wire. The bundled manual separates the -200/-300 fuel and trim-tank arrangements, while the Beluga XL has its own flight-control and autopilot guide. A330neo, passenger-to-freighter and corporate configurations retain their model identities. Aircraft trim and autopilot guidance belong to the flight-control system; they do not establish surface-airload feedback through a passive stick.
About the values
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
Master gain & control system
Master gain85%
La scala finale complessiva applicata a tutto ciò che il modello produce, prima del limite del dispositivo.
Più: tutto (molla, carichi, effetti) si rafforza insieme.
Meno: tutto si ammorbidisce insieme.
Perché qui: Scales overall profile strength while preserving effect balance, subject to device and output limits.
Forces
Spring strength55%
La forza di centraggio di base che riporta la barra al centro. Ogni altra forza si somma a questa. Troppo bassa e la barra sembra molle in volo normale; troppo alta e combatte la mano, mascherando i segnali più piccoli sovrapposti.
Più: un centraggio più fermo che resiste di più alla mano.
Meno: una barra più molle che conta solo sul carico aerodinamico.
Perché qui: Fixed sidestick centering represents the Airbus control arrangement while keeping aircraft control-law behavior separate from hardware resistance. The baseline spring is 0.55. Low-speed spring blending is off.
Cockpit and flight control familiesAirbus A330Airbus Beluga XLSpring deadband1%
Una piccola zona neutra attorno al centro dove la molla resta silenziosa, così i micro-movimenti a riposo non vibrano. Più larga è più tranquilla ma più lasca; più stretta è più precisa ma può fremere attorno al centro.
Più: un centro più calmo ma più lasco, con più gioco.
Meno: un centro più serrato che può fremere a riposo.
Perché qui: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Forces · Center starting force0.03
Perché qui: The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim.
Forces · Center starting force transition0.05
Perché qui: Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual.
Overall aerodynamic load4%
Una scala maestra su entrambi i carichi d'asse sostenuti, applicata prima del loro bilanciamento indipendente. Di norma i profili la lasciano stare e regolano i due carichi d'asse.
Più: entrambi gli assi caricano più forte.
Meno: entrambi gli assi si alleggeriscono insieme.
Perché qui: The stored 0.04 aerodynamic-load gain is inactive under the fixed-centre control law.
Airspeed blendingFalse
Attiva la finestra di innesto della molla a bassa velocità (nodi di inizio/pieno qui sopra). Spento, la molla è costante a ogni velocità.
Perché qui: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Low-speed spring floor50%
Quanta molla sopravvive da fermo, prima che la velocità possa generare forza aerodinamica. Un pavimento alto tiene salda la barra parcheggiata; uno basso dà la sensazione lasca, da cavi allentati, di un aereo leggero in sosta.
Più: una barra più salda in sosta e al rullaggio.
Meno: una barra molle da fermo che si sveglia solo con la velocità.
Perché qui: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring engagement start20 kt
La velocità a cui la molla comincia a salire dal suo pavimento di bassa velocità verso la piena forza: i comandi che «prendono vita» in corsa di decollo.
Perché qui: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring engagement full90 kt
La velocità a cui la molla raggiunge la piena forza. Tra l'inizio e questo punto il centraggio si irrigidisce progressivamente man mano che il flusso cresce sui comandi.
Perché qui: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Velocità di regolazione della forza270
La velocità indicata a cui il carico aerodinamico raggiunge il livello pieno di progetto. Ancora l'intera curva di carico al reale intervallo di velocità dell'aereo: un 172 carica verso 110 nodi, un jet molto più tardi.
Più: i carichi arrivano più tardi; la barra resta leggera fino a velocità più alte.
Meno: i carichi arrivano prima e la crociera pesa di più.
Perché qui: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Centre firmness vs speed0%
Quanto il centraggio stesso si irrigidisce con la velocità, oltre ai carichi da deflessione. Zero mantiene costante la sensazione del centro; di più fa centrare la barra più dura in crociera e più lasca in circuito.
Più: un centro che si indurisce nettamente con la velocità.
Meno: una sensazione di centro costante a ogni velocità.
Perché qui: Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase.
Centre stiffening cap5
Il limite superiore all'irrigidimento del centro dovuto alla velocità, così il volo molto veloce non può caricare la molla senza limite.
Più: più irrigidimento totale concesso ad alta velocità.
Meno: l'irrigidimento si ferma prima.
Perché qui: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron load100%
Il carico sostenuto di rollio da deflessione degli alettoni e velocità, bilanciato indipendentemente dal beccheggio. Insieme al carico dell'equilibratore fissa il rapporto di armonia dei comandi di cui parlano le recensioni.
Più: sforzi di rollio più pesanti.
Meno: alettoni più leggeri e scattanti.
Perché qui: Roll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance.
Elevator load100%
Il carico sostenuto di beccheggio da deflessione dell'equilibratore e velocità, bilanciato indipendentemente dal rollio. È la leva principale dietro il peso di beccheggio di un tipo. Non tocca alettoni, molla, trim né forze di buffet.
Più: sforzi di beccheggio sostenuti più pesanti in velocità.
Meno: una profondità più leggera, meno muscolosa da tenere.
Perché qui: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Max output force55%
Un tetto su ogni forza stabile di beccheggio o rollio prima che raggiunga il dispositivo, a protezione da colpi o saturazioni dell'hardware nelle manovre energiche.
Più: picchi di forza stabile più alti prima del taglio.
Meno: un tetto più morbido; le manovre dure si appiattiscono prima.
Perché qui: Caps directed-force output. Native spring effects and device limits remain separate.
Trim
Trim relief (elevator)0%
Quanto il trim di profondità allevia lo sforzo di beccheggio mantenuto e sposta dove la barra si assesta. Al 100 %, un aereo trimmato bene non richiede pressione mantenuta: il flusso di lavoro trimma-via-il-carico del volo reale.
Più: il trim toglie più sforzo mantenuto; al 100 %, trim pieno lo annulla.
Meno: continui a tenere sforzo anche trimmato.
Perché qui: Aircraft automatic trim is independent of the selected passive stick centre; the trim-tank arrangement is not a hardware trim command. Pitch relief is off, with stored authority 0; roll authority is 0.
Cockpit and flight control familiesAirbus A330Airbus Beluga XLTrim relief (aileron)0%
Lo stesso sollievo per il trim di rollio. La maggior parte dei tipi di aviazione generale non ha un vero trim degli alettoni, quindi resta a zero; i tipi con trim di rollio ricevono un valore corrispondente.
Più: il trim di rollio toglie più sforzo mantenuto.
Meno: il trim di rollio fa meno.
Perché qui: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Effect gains · Ground
Runway rumble0%
Vibrazione di rotolamento da velocità delle ruote e tipo di superficie: asfalto, erba o ghiaia sotto il carrello.
Più: una texture di superficie più forte nella barra.
Meno: un rullaggio più liscio.
Perché qui: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Gear bumps0%
Colpi brevi e discreti da giunti di dilatazione, solchi e superficie irregolare, che punteggiano il rombo continuo.
Più: colpi più netti da giunti e solchi.
Meno: dettagli del suolo più morbidi.
Perché qui: Sets gear-bump texture during ground motion, separate from touchdown impact.
Effect gains · Airframe
Stall buffet6%
Scuotimento della cellula in avvicinamento allo stallo e con l'avviso attivo: quanto forte quest'ala annuncia di essere scontenta. I tipi con distacco netto ricevono buffet modesto e lasciano l'avviso alla sirena.
Più: un tremito pre-stallo più forte.
Meno: un'ala più discreta; la sirena porta l'avviso.
Perché qui: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Mach buffet6%
Buffet transonico in avvicinamento al limite di Mach. Significativo per i jet vicino a MMO, zero per pistoni e turboelica che non ci arrivano mai.
Più: un buffet transonico più forte vicino al limite di Mach.
Meno: un volo più liscio ad alto Mach.
Perché qui: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Flap buffet0%
Vibrazione a bassa frequenza della cellula con i flap estesi nel flusso, nella finestra di velocità in cui lavorano davvero l'aria.
Più: un volo più ruvido con i flap al lavoro.
Meno: flap d'avvicinamento più morbidi.
Perché qui: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Gear buffet0%
Il tambureggiare della cellula per il carrello retrattile appeso nel flusso. Zero per i tipi a carrello fisso, dove la cellula non cambia mai forma.
Più: più tambureggiare col carrello fuori.
Meno: un volo col carrello fuori più pulito.
Perché qui: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Stick shaker50%
Il ronzio dedicato dello stick shaker di stallo, attivato dal sistema di avviso dell'aereo stesso. Solo i tipi con un vero shaker ricevono un valore; tutti gli altri si affidano al buffet aerodinamico e alla sirena.
Più: uno shaker più duro.
Meno: uno shaker più discreto.
Perché qui: Sets triggered shaker strength; inactive while the shaker feature is disabled.
Effect gains · Engine, mechanical & drag
Touchdown thump0%
Il colpo singolo quando le ruote toccano la pista, scalato dal rateo di discesa: un atterraggio di velluto sussurra, un arrivo deciso batte.
Più: un colpo più duro al contatto.
Meno: arrivi più morbidi.
Perché qui: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Reverse rumble0%
Vibrazione in corsa mentre lavorano l'inversione di spinta o le eliche in beta. Zero per i tipi senza reverse.
Più: una corsa più ruvida in reverse.
Meno: una reverse più discreta.
Perché qui: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine rumble0%
Vibrazione continua del propulsore che segue i giri tra minimo e piena potenza, il promemoria sempre presente che qualcosa brucia carburante davanti.
Più: più motore nella barra.
Meno: un motore più discreto.
Perché qui: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Flap motion0%
Vibrazione continua solo mentre il simulatore riporta le superfici dei flap davvero in movimento. Segue il moto reale dell'attuatore e i guasti, non un timer stimato.
Più: più vibrazione coi flap in movimento.
Meno: corse dei flap più discrete.
Perché qui: Sets texture from observed flap movement; a command without movement does not establish the cue.
Autopilot follow
AP follow authority5%
Quanto i comandi dell'autopilota possono muovere fisicamente la barra. Tenuto minuscolo in MSFS, dove un asse mosso può essere riletto come ingresso del pilota; zero disattiva del tutto il seguito.
Più: l'autopilota muove visibilmente di più la tua barra.
Meno: un seguito appena percettibile.
Perché qui: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Spring response
SpringResponse · Travel enabledTrue
Whether this feature is active in this profile.
Perché qui: Applies the configured pitch and roll spring travel curves.
SpringResponse · Output1
Perché qui: Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel.
SpringResponse · Output0.3
Perché qui: Sets response at the second roll-curve point; its input position and other points determine the travel law.
Stick feel
StickFeel · Trim feel enabledFalse
Whether this feature is active in this profile.
Perché qui: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledFalse
Whether this feature is active in this profile.
Perché qui: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Force trim enabledFalse
Whether this feature is active in this profile.
Perché qui: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledFalse
Whether this feature is active in this profile.
Perché qui: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledFalse
Whether this feature is active in this profile.
Perché qui: Enables rate damping with the configured coefficients and control law.
Autopilot
Autopilot · Follow enabledFalse
Whether this feature is active in this profile.
Perché qui: Autopilot following is off; the configured spring and load retain the hardware feel. Separate neutral hold is on at strength 0.28, when a supported autopilot state admits it.
Autopilot · Neutral hold enabledTrue
Whether this feature is active in this profile.
Perché qui: Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.28
Perché qui: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero
Aero · EnabledTrue
Whether this feature is active in this profile.
Perché qui: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Max flap index4
Where this effect reaches full strength (or has fully faded, for washouts).
Più: a more gradual build to a later peak.
Meno: a quicker build.
Perché qui: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index2
Where this effect begins fading in.
Più: the effect begins later.
Meno: it begins earlier.
Perché qui: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Shaker enabledFalse
Whether this feature is active in this profile.
Perché qui: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Ground
Ground · EnabledFalse
Whether this feature is active in this profile.
Perché qui: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Engine
Engine · EnabledFalse
Whether this feature is active in this profile.
Perché qui: Enables engine cues with nonzero settings and valid running-engine telemetry.
Mechanical
Mechanical · EnabledTrue
Whether this feature is active in this profile.
Perché qui: Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0
The strength of this effect.
Più: a stronger effect.
Meno: a weaker one.
Perché qui: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Tutte le impostazioni del profilo
| Parametro | Valore | Cosa controlla e perché |
|---|---|---|
| Spring strength | 0.55 | Fixed sidestick centering represents the Airbus control arrangement while keeping aircraft control-law behavior separate from hardware resistance. The baseline spring is 0.55. Low-speed spring blending is off. |
| Spring deadband | 0.01 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Forces · Center starting force | 0.03 | The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim. |
| Forces · Center starting force transition | 0.05 | Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual. |
| Force gain | 0.04 | The stored 0.04 aerodynamic-load gain is inactive under the fixed-centre control law. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | False | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.5 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 20 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 90 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Velocità di regolazione della forza | 270.0 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0 | Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 1 | Roll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance. |
| Elevator force scale | 1 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| SpringResponse · Travel enabled | True | Applies the configured pitch and roll spring travel curves. |
| SpringResponse · Output | 1 | Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel. |
| SpringResponse · Output | 0.3 | Sets response at the second roll-curve point; its input position and other points determine the travel law. |
| StickFeel · Trim feel enabled | False | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | False | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0 | Aircraft automatic trim is independent of the selected passive stick centre; the trim-tank arrangement is not a hardware trim command. Pitch relief is off, with stored authority 0; roll authority is 0. |
| StickFeel · Aileron authority | 0 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| StickFeel · G load enabled | False | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | False | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. Separate neutral hold is on at strength 0.28, when a supported autopilot state admits it. |
| Autopilot · Follow authority | 0.05 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | True | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.28 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.06 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0.06 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 4 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | False | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | False | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Fonti pubbliche 22
- Airbus A330Research background · Wikipedia revision 1373820047 · retrieved 2026-09-12
- Cockpit and flight control familiesAirbus cockpit family descriptions; Airbus cockpit commonality, sidestick philosophy; Airbus cockpit commonality
- Airbus A330Airbus A330 family
- Airbus Beluga XLAirbus A330 family
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- Airbus A330-300 POH
- X-Plane 12 Desktop Manual
- X-Plane aircraft and avionics manuals
- A330-900 change log
- A330 900Official developer / designated store catalogue · checked 2026-09-12
- Captain’s log: landing the first Airbus A330 in AntarcticaCarlos Mirpuri · 5 December 2025
- The flight test of Airbus’s refreshed widebody – the A330neoMike Gerzanics · 2019
- Umschulung auf den Airbus A330 – Upgrade für einen KapitänClaus Harder · 5 May 2023
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- Aerosoft Aircraft A330 neoProduct listing captured 28 September 2026; A330-900neo, MSFS 2024
- A330-300Product listing captured 2026-09-24; edition scope from the reviewed catalogue
- A339X A330-900neoProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- JARDesign 330 Airliner -JARDesign-A330Product listing captured 2026-09-30; edition scope from the reviewed catalogue
- Airbus A330-200 exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- Airbus A330-300 exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- Airbus A330-900neo exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
Comunità e correzioni
Se la tua esperienza sul tipo dice che questa pagina sbaglia, correggila qui.
Correzioni dei piloti
Voli questo velivolo? Correggi questa pagina.
Questa pagina nasce da riferimenti citati, e l'esperienza reale sul tipo vale più di una citazione. Cita l'affermazione errata e dicci cosa fa il velivolo reale. Le correzioni vanno al maintainer per revisione e alimentano la prossima revisione di questa ricerca.
Accedi per inviare una correzione. Nessuna password, solo un link e-mail monouso.
Accedi
Chiacchiere da hangar
Conversazione aperta su come si vola e si regola il Airbus A330 family, nel forum della comunità. Le correzioni sopra vanno in privato al maintainer; le chiacchiere da hangar sono pubbliche.
Accedi per avviarla. Nessuna password, solo un link e-mail monouso.
Accedi
Comunità
Profili della comunità per questo velivolo
Ancora nessun profilo della comunità per questo velivolo.
Lo hai regolato a modo tuo? Condividi un profilo e apparirà qui.