Development milestones
First flight: February 29, 1960
Developed from: Beechcraft Travel Air
Biblioteca de aeronavesBeechcraft Baron 58 / G58
Matti Blume · CC BY-SA 4.0 · Beechcraft Baron.Beechcraft Baron 58 / G58
A low-wing piston twin that carries the Beechcraft touring-aircraft lineage into two-engine flying.
General aviation15 opções de perfil
Conheça o avião
The Baron entered the Beechcraft range in 1961, developing from the earlier Travel Air. Its retractable landing gear and two wing-mounted piston engines provide the familiar outline of a light touring twin. Several fuselage and engine combinations appeared over the family's long history.
The Model 58 and glass-cockpit G58 share a recognisable shape while representing different equipment generations. The simulator products span conventional-instrument aircraft and modern G58s, with avionics and systems described for each.
Beechcraft Baron · Specifications (B55) · real aircraft; source units retained
- Length
- 28 ft 0 in (8.53 m)↗
- Wingspan
- 37 ft 10 in (11.53 m)↗
- Height
- 9 ft 7 in (2.92 m)↗
- Wing area
- 199.2 sq ft (18.51 m² )↗
- Empty weight
- 3,156 lb (1,432 kg)↗
- Max takeoff weight
- 5,100 lb (2,313 kg)↗
- Powerplant
- 2 × Continental IO-470-L air-cooled six-cylinder horizontally opposed engines, 260 hp (190 kW) each↗
- Maximum speed
- 205 kn (236 mph, 380 km/h) at sea level↗
- Cruise speed
- 180 kn (210 mph, 330 km/h) at 12,000 ft (3,700 m) (55% power)↗
- Stall speed
- 73 kn (84 mph, 135 km/h) IAS , power off, wheels and flaps lowered↗
Mais sobre esta aeronave no AirframeDB
Smooth airwork in a fast, well-equipped twin
Twombly's G58 demonstration began near sea level and close to maximum weight, yet the initial climb reached about 1,800 feet per minute. At 11,000 feet, he recorded roughly 200 knots true airspeed before exploring reduced fuel-flow settings. The pace reinforced his view that a Baron transition deserves substantial preparation. Once settled into airwork, however, he particularly enjoyed the smooth response during steep turns and the familiar Beechcraft cockpit around the modern Garmin displays.
The evaluation also included flight on one engine. In the cold conditions of that particular demonstration, he reported a continuing climb at 11,000 feet, with rudder and aileron trim helping reduce the workload. That observation should not be read as performance available at every temperature or loading. Returning to land required firm back pressure, followed by the satisfying touchdown he associated with the type. His report combines enthusiasm for the handling with a clear sense of how quickly a powerful twin can keep its pilot occupied.
A contractor puts an early glass-cockpit Baron to work
Hill had operated one of the first Garmin-equipped G58s for nearly five months when Cox interviewed him. His construction business took him around Arizona, Nevada and California several times a week, usually with bankers, investors or employees aboard. Moving from a Bonanza made the cabin and panel layout familiar, while the twin's rear double doors proved popular with his passengers. He expected to fly about 500 hours annually if that early pattern continued.
He praised the climb and tightly coordinated controls, saying the aircraft's weight was less apparent in flight than he had expected. Learning the G1000 brought a clearer picture of his position in instrument conditions. His equipment choices reflected the work: relatively short trips and infrequent use of every seat allowed him to choose the smaller standard fuel capacity and preserve payload. For Hill, the appeal was how well the Baron fitted recurring business journeys, with enough speed and accommodation to meet the needs he actually had.
Eight years sharing a Baron for travel and relief flights
Lincoln had shared his 1984 Baron 58 with a partner for eight years when Courtney spoke with him. Their flying included journeys from Connecticut along the American East Coast, trips through the Bahamas and humanitarian work connected with Haiti's 2010 earthquake. He remembered feeling comfortable in the aeroplane from the first flight. The yoke felt substantial, but the response was precise, giving him a strong sense of connection with the aircraft.
He was preparing to sell because his own flying needs had changed and he expected fewer long journeys. That decision did not diminish his affection for the Baron. He regarded it as especially attractive when carrying a small number of passengers and valuing performance over maximum accommodation. He cautioned against treating every nominal seat as equally spacious, suggesting a larger aircraft for a larger family.
Fontes públicas 17
- Beechcraft BaronResearch background · Wikipedia revision 1370279143 · retrieved 2026-09-12
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- MSFS 2020 FAQ and edition aircraft inventory
- Beechcraft Baron 58 POH
- X-Plane 12 Desktop Manual
- X-Plane aircraft and avionics manuals
- X-Plane 11 Desktop Manual
- Baron ProfessionalOfficial developer / designated store catalogue · checked 2026-09-12
- Steam Gauge Overhaul - Analog BaronOfficial developer / designated store catalogue · checked 2026-09-12
- Reality Expansion Pack · default Baron B58Official developer / designated store catalogue · checked 2026-09-12
- Hawker-Beechcraft G58 Baron: Noble SteedIan J. Twombly · 1 February 2009
- The Baron of GlassJim Hill, interviewed by Bill Cox · 1 July 2006
- The Beechcraft 58 Baron: Crown Royalty of the Light-Twin WorldTom Lincoln, interviewed by Carly Courtney · 27 March 2017
- Reality Expansion Pack for Carenado B58 Baron-Simcoders-REP-Official developer / designated-store reference · checked 2026-09-14
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- Beechcraft B58 Enhanced Flight ModelsProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
Como o perfil o modela
Black Square Baron B58
Free + ProMSFS 2020MSFS 2024Black Square
The Baron entered the Beechcraft range in 1961, developing from the earlier Travel Air. Its retractable landing gear and two wing-mounted piston engines provide the familiar outline of a light touring twin. Several fuselage and engine combinations appeared over the family's long history.
This profile selects Black Square Baron B58 for MSFS 2020, MSFS 2024.
Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
Valid trim provides the configured pressure relief. Autopilot following is off.
Esta revisão específica ainda não está habilitada para instalação pública.
Controls and trim
Baron products distinguish normally aspirated B58 aircraft, turbocharged B58TCs and pressurized B58Ps. Black Square documents three-axis trim and separate KFC150 autopilot and flight-director cancellation. Carenado's B58 uses its own KFC225 implementation. Engine boost and cabin pressure distinguish equipment and performance; they do not by themselves prescribe a different yoke force.
The selected implementation
Baron Professional separates B58, B58TC and B58P. Its KFC150 distinguishes autopilot disengagement from flight-director cancellation; mistrim indication is not force output.
About the values
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
Master gain & control system
Master gain85%
A escala final de saída aplicada a tudo que o modelo produz, antes do teto do dispositivo.
Mais: tudo (mola, cargas, efeitos) fica mais forte junto.
Menos: tudo amacia junto.
Por que aqui: Scales overall profile strength while preserving effect balance, subject to device and output limits.
Forces
Spring strength74%
A força base de centragem que puxa o manche de volta ao centro. Todas as outras forças se empilham sobre ela. Baixa demais e o manche parece frouxo em voo normal; alta demais e ele briga com sua mão e mascara os sinais menores por cima.
Mais: uma centragem mais firme que resiste mais à mão.
Menos: um manche mais mole que depende só da carga aerodinâmica.
Por que aqui: The piston twin's selected aerodynamic yoke loading is independent of whether its engines are normally aspirated or turbocharged and its cabin is pressurized. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 65 KIAS.
Analog Baron manualOperating ManualCarenado B58 Baron for X-Plane 11Spring deadband4%
Uma pequena zona neutra ao redor do centro onde a mola fica quieta, para que movimentos mínimos em repouso não trepidem. Mais larga é mais calma porém mais solta; mais estreita é mais precisa mas pode tremer no centro.
Mais: um centro mais calmo porém mais solto, com mais folga.
Menos: um centro mais apertado que pode tremer em repouso.
Por que aqui: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Overall aerodynamic load80%
Uma escala mestra sobre as duas cargas sustentadas de eixo, aplicada antes do balanço independente delas. Os perfis normalmente a deixam quieta e ajustam as duas cargas de eixo.
Mais: os dois eixos carregam mais forte.
Menos: os dois eixos aliviam juntos.
Por que aqui: The aerodynamic-load gain is 0.8 with an indicated-speed reference of 170 KIAS. This supplies speed-dependent loading alongside the spring.
Airspeed blendingTrue
Ativa a janela de engate da mola em baixa velocidade (nós de início/pleno acima). Desligado, a mola é constante em todas as velocidades.
Por que aqui: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Low-speed spring floor50%
Quanto da mola sobrevive parado, antes que a velocidade possa gerar força aerodinâmica. Um piso alto mantém o manche estacionado firme; um piso baixo dá a sensação solta, de cabos com folga, de um avião leve estacionado.
Mais: um manche mais firme estacionado e no táxi.
Menos: um manche mole estacionado que só desperta com velocidade.
Por que aqui: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring engagement start8 kt
A velocidade em que a mola começa a subir do piso de baixa velocidade rumo à força plena: os comandos "ganhando vida" na corrida de decolagem.
Por que aqui: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring engagement full65 kt
A velocidade em que a mola atinge força plena. Entre o início e este ponto, a centragem endurece progressivamente à medida que o fluxo de ar cresce sobre os comandos.
Por que aqui: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Velocidade de ajuste de força170
A velocidade indicada em que a carga aerodinâmica atinge seu nível pleno de projeto. Ela ancora toda a curva de carga à faixa real de velocidades do avião: um 172 carrega por volta de 110 nós, um jato bem depois.
Mais: as cargas chegam mais tarde; o manche fica leve até mais velocidade.
Menos: as cargas chegam antes e o cruzeiro pesa mais.
Por que aqui: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Centre firmness vs speed15%
Quanto a própria centragem endurece com a velocidade, além das cargas de deflexão. Zero mantém a sensação de centro constante; mais faz o manche centrar mais duro em cruzeiro e mais solto no circuito.
Mais: um centro que endurece nitidamente com a velocidade.
Menos: uma sensação de centro constante em qualquer velocidade.
Por que aqui: The high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 65 KIAS, with the squared-speed ratio capped at 5.
Centre stiffening cap5
O limite superior do endurecimento de centro pela velocidade, para que voos muito rápidos não tensionem a mola sem freio.
Mais: mais endurecimento total permitido em alta velocidade.
Menos: o endurecimento corta antes.
Por que aqui: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron load72%
A carga sustentada de rolagem da deflexão dos ailerons e da velocidade, balanceada independentemente da arfagem. Junto com a carga do profundor define a razão de harmonia de comandos de que falam as resenhas.
Mais: esforços de rolagem mais pesados.
Menos: ailerons mais leves e vivos.
Por que aqui: Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator load100%
A carga sustentada de arfagem da deflexão do profundor e da velocidade, balanceada independentemente da rolagem. É a alavanca principal por trás do peso de arfagem de um tipo. Não toca aileron, mola, compensador nem forças de buffet.
Mais: esforços sustentados de arfagem mais pesados em velocidade.
Menos: um profundor mais leve, com menos músculo para segurar.
Por que aqui: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Max output force55%
Um teto sobre cada força estável de arfagem ou rolagem antes de chegar ao dispositivo, protegendo contra pancadas ou saturação do hardware em manobras fortes.
Mais: picos de força estável mais altos antes do corte.
Menos: um teto mais suave; manobras duras achatam antes.
Por que aqui: Caps directed-force output. Native spring effects and device limits remain separate.
Trim
Trim relief (elevator)30%
Com que força o compensador de profundor alivia o esforço de arfagem mantido e desloca onde o manche assenta. Em 100 %, um avião bem compensado não precisa de pressão mantida: o fluxo de trabalho de compensar-a-carga do voo real.
Mais: o compensador tira mais esforço mantido; em 100 %, todo compensado o anula.
Menos: você segue segurando esforço mesmo compensado.
Por que aqui: Documented elevator trim supports pitch relief. Aileron and rudder trim serve separate axes, and a trim-tab animation is not a hardware-neutral calibration. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.12.
Analog Baron manualOperating ManualCarenado B58 Baron for X-Plane 11Trim relief (aileron)12%
O mesmo alívio para o compensador de rolagem. A maioria dos tipos de aviação geral não tem compensador de aileron real, então isto fica em zero; tipos com compensador de rolagem recebem um valor correspondente.
Mais: o compensador de rolagem tira mais esforço mantido.
Menos: o compensador de rolagem faz menos.
Por que aqui: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Effect gains · Ground
Runway rumble40%
Vibração de rolagem no solo pela velocidade das rodas e tipo de superfície: asfalto, grama ou cascalho sob o trem.
Mais: uma textura de superfície mais forte no manche.
Menos: um táxi mais liso.
Por que aqui: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Gear bumps25%
Solavancos curtos e discretos de juntas de dilatação, sulcos e superfície irregular, pontuando o ronco contínuo.
Mais: solavancos mais nítidos de juntas e sulcos.
Menos: detalhes de solo mais suaves.
Por que aqui: Sets gear-bump texture during ground motion, separate from touchdown impact.
Effect gains · Airframe
Stall buffet35%
Sacudida da célula ao se aproximar do estol e enquanto o aviso soa: quão alto esta asa anuncia que está infeliz. Tipos de quebra seca recebem buffet modesto e deixam a buzina levar o aviso.
Mais: um tremor pré-estol mais forte.
Menos: uma asa mais discreta; a buzina leva o aviso.
Por que aqui: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Mach buffet0%
Buffet transônico ao se aproximar do limite de Mach. Significativo para jatos perto de MMO, zero para pistões e turboélices que nunca chegam lá.
Mais: um buffet transônico mais forte perto do limite de Mach.
Menos: um voo mais liso em Mach alto.
Por que aqui: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Flap buffet0%
Vibração de baixa frequência da célula com flapes estendidos no fluxo, na janela de velocidade em que eles realmente trabalham o ar.
Mais: um voo mais áspero com flapes trabalhando.
Menos: flapes de aproximação mais suaves.
Por que aqui: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Gear buffet0%
Tamborilar da célula pelo trem retrátil pendurado na corrente de ar. Zero para tipos de trem fixo, onde a célula nunca muda de forma.
Mais: mais tamborilar com o trem embaixo.
Menos: um voo com trem embaixo mais limpo.
Por que aqui: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Stick shaker50%
O zumbido dedicado do stick shaker de estol, disparado pelo próprio sistema de aviso do avião. Só tipos com shaker real recebem valor; o resto confia no buffet aerodinâmico e na buzina.
Mais: um shaker mais duro.
Menos: um shaker mais discreto.
Por que aqui: Sets triggered shaker strength; inactive while the shaker feature is disabled.
Effect gains · Engine, mechanical & drag
Touchdown thump65%
O golpe único quando as rodas tocam a pista, escalado pela razão de descida: um pouso macio sussurra, uma chegada firme bate.
Mais: um golpe mais duro no toque.
Menos: chegadas mais suaves.
Por que aqui: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Reverse rumble0%
Vibração na corrida enquanto o reverso ou as hélices em beta trabalham. Zero para tipos sem reverso.
Mais: uma corrida mais áspera sob reverso.
Menos: um reverso mais discreto.
Por que aqui: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine rumble12%
Vibração contínua do grupo motopropulsor seguindo a rotação entre marcha lenta e potência máxima, o lembrete sempre presente de que algo queima combustível lá na frente.
Mais: mais motor no manche.
Menos: um motor mais discreto.
Por que aqui: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Flap motion12%
Vibração contínua apenas enquanto o simulador informa as superfícies de flape realmente em movimento. Segue o movimento e as falhas reais do atuador, não um cronômetro estimado.
Mais: mais vibração com os flapes em movimento.
Menos: cursos de flape mais discretos.
Por que aqui: Sets texture from observed flap movement; a command without movement does not establish the cue.
Autopilot follow
AP follow authority10%
Quanto os comandos do piloto automático podem mover fisicamente o manche. Mantido minúsculo no MSFS, onde um eixo movido pode ser lido de volta como entrada do piloto; zero desativa o seguimento por completo.
Mais: o piloto automático move seu manche visivelmente mais.
Menos: um seguimento quase imperceptível.
Por que aqui: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Stick feel
StickFeel · Trim feel enabledFalse
Whether this feature is active in this profile.
Por que aqui: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledTrue
Whether this feature is active in this profile.
Por que aqui: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Force trim enabledFalse
Whether this feature is active in this profile.
Por que aqui: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledTrue
Whether this feature is active in this profile.
Por que aqui: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledTrue
Whether this feature is active in this profile.
Por que aqui: Enables rate damping with the configured coefficients and control law.
Autopilot
Autopilot · Follow enabledFalse
Whether this feature is active in this profile.
Por que aqui: Autopilot following is off; the configured spring and load retain the hardware feel.
Autopilot · Neutral hold enabledFalse
Whether this feature is active in this profile.
Por que aqui: Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.6
Por que aqui: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero
Aero · EnabledTrue
Whether this feature is active in this profile.
Por que aqui: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Max flap index2
Where this effect reaches full strength (or has fully faded, for washouts).
Mais: a more gradual build to a later peak.
Menos: a quicker build.
Por que aqui: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index2
Where this effect begins fading in.
Mais: the effect begins later.
Menos: it begins earlier.
Por que aqui: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Shaker enabledFalse
Whether this feature is active in this profile.
Por que aqui: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Ground
Ground · EnabledTrue
Whether this feature is active in this profile.
Por que aqui: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Engine
Engine · EnabledTrue
Whether this feature is active in this profile.
Por que aqui: Enables engine cues with nonzero settings and valid running-engine telemetry.
Mechanical
Mechanical · EnabledTrue
Whether this feature is active in this profile.
Por que aqui: Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0.12
The strength of this effect.
Mais: a stronger effect.
Menos: a weaker one.
Por que aqui: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Todas as configurações do perfil
| Parâmetro | Valor | O que controla e por quê |
|---|---|---|
| Spring strength | 0.74 | The piston twin's selected aerodynamic yoke loading is independent of whether its engines are normally aspirated or turbocharged and its cabin is pressurized. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 65 KIAS. |
| Spring deadband | 0.045 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Force gain | 0.8 | The aerodynamic-load gain is 0.8 with an indicated-speed reference of 170 KIAS. This supplies speed-dependent loading alongside the spring. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | True | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.5 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 8 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 65 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Velocidade de ajuste de força | 170 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0.15 | The high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 65 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 0.72 | Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | 1 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| StickFeel · Trim feel enabled | False | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | True | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0.3 | Documented elevator trim supports pitch relief. Aileron and rudder trim serve separate axes, and a trim-tab animation is not a hardware-neutral calibration. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.12. |
| StickFeel · Aileron authority | 0.12 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| StickFeel · G load enabled | True | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | True | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot · Follow authority | 0.1 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | False | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.6 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.35 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 2 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | True | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0.4 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0.25 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0.65 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | True | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0.12 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0.12 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0.12 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Fontes públicas 20
- Beechcraft BaronResearch background · Wikipedia revision 1370279143 · retrieved 2026-09-12
- Analog Baron manualBeechcraft Baron 58 / G58
- Operating ManualBaron Professional manual introduction, KFC150 pp.41-42, hardware section and change log
- Carenado B58 Baron for X-Plane 11Beechcraft Baron 58 / G58
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- MSFS 2020 FAQ and edition aircraft inventory
- Beechcraft Baron 58 POH
- X-Plane 12 Desktop Manual
- X-Plane aircraft and avionics manuals
- X-Plane 11 Desktop Manual
- Baron ProfessionalOfficial developer / designated store catalogue · checked 2026-09-12
- Steam Gauge Overhaul - Analog BaronOfficial developer / designated store catalogue · checked 2026-09-12
- Reality Expansion Pack · default Baron B58Official developer / designated store catalogue · checked 2026-09-12
- Hawker-Beechcraft G58 Baron: Noble SteedIan J. Twombly · 1 February 2009
- The Baron of GlassJim Hill, interviewed by Bill Cox · 1 July 2006
- The Beechcraft 58 Baron: Crown Royalty of the Light-Twin WorldTom Lincoln, interviewed by Carly Courtney · 27 March 2017
- Reality Expansion Pack for Carenado B58 Baron-Simcoders-REP-Official developer / designated-store reference · checked 2026-09-14
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- Beechcraft B58 Enhanced Flight ModelsProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
Comunidade e correções
Se a sua experiência no tipo diz que esta página errou, corrija aqui.
Correções de pilotos
Voa esta aeronave? Corrija esta página.
Esta página é construída com referências citadas, e experiência real no tipo vale mais que citação. Cite a afirmação errada e conte o que a aeronave real faz. As correções vão ao mantenedor para revisão e alimentam a próxima revisão desta pesquisa.
Entre para enviar uma correção. Sem senha, só um link de e-mail de uso único.
Entrar
Papo de hangar
Conversa aberta sobre voar e ajustar o Beechcraft Baron 58 / G58, no fórum da comunidade. As correções acima vão em particular ao mantenedor; o papo de hangar é público.
Entre para começar. Sem senha, só um link de e-mail de uso único.
Entrar
Comunidade
Perfis da comunidade para esta aeronave
Ainda não há perfis da comunidade para esta aeronave.
Ajustou do seu jeito? Compartilhe um perfil e ele aparecerá aqui.