Biblioteca de aeronavesCurtiss JN-4 Jenny
Curtiss JN-4 JennyLarry Lamb · CC BY-SA 2.0 · Curtiss JN-4H in flight at Old Rhinebeck Aerodrome, September 2012.

Curtiss JN-4 Jenny

A First World War trainer that became a familiar sight in the barnstorming era.
Vintage1 opções de perfil

Conheça o avião

The Jenny family was developed as a military trainer, with two open cockpits, braced biplane wings and conventional landing gear. Surplus aircraft helped carry flying into civilian life after the war, appearing at displays and offering rides across North America.

Its cockpit belongs to a much earlier era than the touring aircraft that followed. The MSFS documentation also identifies convenience changes to ground steering. Those changes are adaptations for the simulator.

Aircraft / family

Propulsion
Single piston↗
Configuration
Biplane · Open tandem cockpits↗

Mais sobre esta aeronave no AirframeDB

A touring replica takes shape through a community project

Collins describes how comparison with original drawings turned an intended repair into a largely new Jenny replica. Students helped build and finish it, while a modern engine, brakes, radio and pitch trim supported travel to public events.

Letters home record the work of learning to fly

Crawford entered aviation as a ground officer, with maintenance and other duties occupying his days. When flight training opened to ground officers, he applied immediately. His letters home then became detailed accounts of a demanding new skill, recording mistakes and revisiting each flight as he tried to improve.

He admitted that an instructor’s presence gave him confidence during unfamiliar manoeuvres. Quiet instructors could also leave him wondering how well he was doing. By the end of October, the deadline for his first solo weighed heavily on him. Much of the following journal entry has been eaten away, but a surviving word records a celebration. Later flying brought enough confidence for him to become an instructor himself.

Wind, wires and a surprising movement of the rudder

Tracy took the controls after Robin Reid lifted Frank Schelling’s restored Jenny from the grass at Schellville. The view of wooden struts, vibrating wires and fluttering flags made it difficult to look inside at the instruments. Wind noise and the air on his face became particularly vivid parts of the experience.

During the flight, pressure on a rudder pedal seemed to be an instructor’s demonstration. With no intercom between the cockpits, Tracy could not ask immediately. Reid later explained that he had not touched the controls: the movement had come from the aircraft itself. The short outing ended with Reid landing and the tailskid dragging through the grass. Tracy reluctantly climbed out, leaving the next visitors their turn.

Affection for the Jenny comes with respect for its limitations

After watching the owner make the first circuit, Davisson took his turn in the Jenny. Its slow climb initially made the trees ahead seem uncomfortably close. In the bumpy air, he found that keeping the aircraft where he wanted it required substantial and very unequal effort across the controls.

The approach gave him another lesson in the aircraft’s character. Hand signals from the front cockpit called for a lower nose, and he later added power to avoid arriving short. His first touchdown bounced before he settled into a better landing. The encounter left him admiring the pilots who had worked and performed in Jennies, while questioning the nostalgia that could make their aircraft’s shortcomings disappear from the story.

An early departure helps a travelling history lesson reach its audience

Walker described Miss Jenny as rewarding but demanding, with the large wings making every rising current noticeable. Early departures offered calmer air as well as the pleasure of a dawn flight. A trip across Kentucky in 2015 used an intermediate fuel stop and reached the destination before the wind became stronger.

The flying depended on a team travelling with tools, spare parts and displays explaining the aircraft’s history. For Walker, arriving at an airshow was an opportunity to share that history with people who might otherwise see it only in a museum. He remembered strangers following the unusual biplane by car and visitors bringing their own family stories. Those encounters helped justify the effort of keeping the replica on the road and in the air.

Fontes públicas 10
  1. Curtiss JN JennyResearch background · Wikipedia revision 1030672134 · retrieved 2026-09-12
  2. JN4_Jenny_FS24_Manual
  3. Microsoft Flight Simulator aircraft manuals
  4. MSFS 2024 FAQ and edition aircraft inventory
  5. MSFS 2020 FAQ and edition aircraft inventory
  6. Letters From a WWI Jenny PilotWilliam Crawford Woods, using grandfather Louis Crawford’s letters and journal · February 2014
  7. Curtiss Jenny Time MachineTracy · 26 February 2010
  8. A Lady Named Jenny: flight report, page twoAir Progress report from the mid-1970s, republished by its author
  9. Flying Miss JennyMike Collins interviews Dorian Walker · 13 June 2016
  10. JN4_Jenny_MSFS_Manual v2Gathered developer documentation

Como o perfil o modela

Curtiss JN-4 Jenny

Free + Pro
MSFS 2024MSFS 2020

The Jenny family was developed as a military trainer, with two open cockpits, braced biplane wings and conventional landing gear. Surplus aircraft helped carry flying into civilian life after the war, appearing at displays and offering rides across North America.

This starting point selects Curtiss JN-4 Jenny. Its aircraft-level settings do not select a particular developer’s custom systems.

The spring supplies the biplane’s selected stick resistance. Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.

A period cockpit’s equipment and the profile’s trim response are separate descriptions. Valid trim provides the configured pressure relief. Autopilot following is off.

Controls and trim

The Jenny’s two open cockpits and braced biplane wings served military training before surplus aircraft moved into civilian displays and rides. Its sparse period controls remain distinct from the MSFS package’s ground-steering conveniences.

JN4_Jenny_MSFS_Manual v2Click here to open the Curtiss JN-4 Jenny Manual

About the values

The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.

Master gain & control system

Master gain85%

A escala final de saída aplicada a tudo que o modelo produz, antes do teto do dispositivo.

Mais: tudo (mola, cargas, efeitos) fica mais forte junto.

Menos: tudo amacia junto.

Por que aqui: Scales overall profile strength while preserving effect balance, subject to device and output limits.

Forces

Spring strength64%

A força base de centragem que puxa o manche de volta ao centro. Todas as outras forças se empilham sobre ela. Baixa demais e o manche parece frouxo em voo normal; alta demais e ele briga com sua mão e mascara os sinais menores por cima.

Mais: uma centragem mais firme que resiste mais à mão.

Menos: um manche mais mole que depende só da carga aerodinâmica.

Por que aqui: The spring supplies the biplane’s selected stick resistance. The baseline spring is 0.64. Its low-speed blend reaches baseline strength at 32.5 KIAS.

JN4_Jenny_MSFS_Manual v2Click here to open the Curtiss JN-4 Jenny Manual
Spring deadband4%

Uma pequena zona neutra ao redor do centro onde a mola fica quieta, para que movimentos mínimos em repouso não trepidem. Mais larga é mais calma porém mais solta; mais estreita é mais precisa mas pode tremer no centro.

Mais: um centro mais calmo porém mais solto, com mais folga.

Menos: um centro mais apertado que pode tremer em repouso.

Por que aqui: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.

Overall aerodynamic load80%

Uma escala mestra sobre as duas cargas sustentadas de eixo, aplicada antes do balanço independente delas. Os perfis normalmente a deixam quieta e ajustam as duas cargas de eixo.

Mais: os dois eixos carregam mais forte.

Menos: os dois eixos aliviam juntos.

Por que aqui: The aerodynamic-load gain is 0.8 with an indicated-speed reference of 65 KIAS. This supplies speed-dependent loading alongside the spring.

Airspeed blendingTrue

Ativa a janela de engate da mola em baixa velocidade (nós de início/pleno acima). Desligado, a mola é constante em todas as velocidades.

Por que aqui: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.

Low-speed spring floor50%

Quanto da mola sobrevive parado, antes que a velocidade possa gerar força aerodinâmica. Um piso alto mantém o manche estacionado firme; um piso baixo dá a sensação solta, de cabos com folga, de um avião leve estacionado.

Mais: um manche mais firme estacionado e no táxi.

Menos: um manche mole estacionado que só desperta com velocidade.

Por que aqui: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.

Spring engagement start9.1 kt

A velocidade em que a mola começa a subir do piso de baixa velocidade rumo à força plena: os comandos "ganhando vida" na corrida de decolagem.

Por que aqui: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.

Spring engagement full32.5 kt

A velocidade em que a mola atinge força plena. Entre o início e este ponto, a centragem endurece progressivamente à medida que o fluxo de ar cresce sobre os comandos.

Por que aqui: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.

Velocidade de ajuste de força65

A velocidade indicada em que a carga aerodinâmica atinge seu nível pleno de projeto. Ela ancora toda a curva de carga à faixa real de velocidades do avião: um 172 carrega por volta de 110 nós, um jato bem depois.

Mais: as cargas chegam mais tarde; o manche fica leve até mais velocidade.

Menos: as cargas chegam antes e o cruzeiro pesa mais.

Por que aqui: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.

Centre firmness vs speed15%

Quanto a própria centragem endurece com a velocidade, além das cargas de deflexão. Zero mantém a sensação de centro constante; mais faz o manche centrar mais duro em cruzeiro e mais solto no circuito.

Mais: um centro que endurece nitidamente com a velocidade.

Menos: uma sensação de centro constante em qualquer velocidade.

Por que aqui: The high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 32.5 KIAS, with the squared-speed ratio capped at 5.

Centre stiffening cap5

O limite superior do endurecimento de centro pela velocidade, para que voos muito rápidos não tensionem a mola sem freio.

Mais: mais endurecimento total permitido em alta velocidade.

Menos: o endurecimento corta antes.

Por que aqui: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.

Aileron load60%

A carga sustentada de rolagem da deflexão dos ailerons e da velocidade, balanceada independentemente da arfagem. Junto com a carga do profundor define a razão de harmonia de comandos de que falam as resenhas.

Mais: esforços de rolagem mais pesados.

Menos: ailerons mais leves e vivos.

Por que aqui: Roll and pitch aerodynamic scales are 0.6 and 0.78, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.

Elevator load78%

A carga sustentada de arfagem da deflexão do profundor e da velocidade, balanceada independentemente da rolagem. É a alavanca principal por trás do peso de arfagem de um tipo. Não toca aileron, mola, compensador nem forças de buffet.

Mais: esforços sustentados de arfagem mais pesados em velocidade.

Menos: um profundor mais leve, com menos músculo para segurar.

Por que aqui: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.

Max output force55%

Um teto sobre cada força estável de arfagem ou rolagem antes de chegar ao dispositivo, protegendo contra pancadas ou saturação do hardware em manobras fortes.

Mais: picos de força estável mais altos antes do corte.

Menos: um teto mais suave; manobras duras achatam antes.

Por que aqui: Caps directed-force output. Native spring effects and device limits remain separate.

Trim

Trim relief (elevator)30%

Com que força o compensador de profundor alivia o esforço de arfagem mantido e desloca onde o manche assenta. Em 100 %, um avião bem compensado não precisa de pressão mantida: o fluxo de trabalho de compensar-a-carga do voo real.

Mais: o compensador tira mais esforço mantido; em 100 %, todo compensado o anula.

Menos: você segue segurando esforço mesmo compensado.

Por que aqui: A period cockpit’s equipment and the profile’s trim response are separate descriptions. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.

JN4_Jenny_MSFS_Manual v2Click here to open the Curtiss JN-4 Jenny Manual
Trim relief (aileron)0%

O mesmo alívio para o compensador de rolagem. A maioria dos tipos de aviação geral não tem compensador de aileron real, então isto fica em zero; tipos com compensador de rolagem recebem um valor correspondente.

Mais: o compensador de rolagem tira mais esforço mantido.

Menos: o compensador de rolagem faz menos.

Por que aqui: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.

Effect gains · Ground

Runway rumble40%

Vibração de rolagem no solo pela velocidade das rodas e tipo de superfície: asfalto, grama ou cascalho sob o trem.

Mais: uma textura de superfície mais forte no manche.

Menos: um táxi mais liso.

Por que aqui: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.

Gear bumps25%

Solavancos curtos e discretos de juntas de dilatação, sulcos e superfície irregular, pontuando o ronco contínuo.

Mais: solavancos mais nítidos de juntas e sulcos.

Menos: detalhes de solo mais suaves.

Por que aqui: Sets gear-bump texture during ground motion, separate from touchdown impact.

Effect gains · Airframe

Stall buffet35%

Sacudida da célula ao se aproximar do estol e enquanto o aviso soa: quão alto esta asa anuncia que está infeliz. Tipos de quebra seca recebem buffet modesto e deixam a buzina levar o aviso.

Mais: um tremor pré-estol mais forte.

Menos: uma asa mais discreta; a buzina leva o aviso.

Por que aqui: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.

Mach buffet0%

Buffet transônico ao se aproximar do limite de Mach. Significativo para jatos perto de MMO, zero para pistões e turboélices que nunca chegam lá.

Mais: um buffet transônico mais forte perto do limite de Mach.

Menos: um voo mais liso em Mach alto.

Por que aqui: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.

Flap buffet0%

Vibração de baixa frequência da célula com flapes estendidos no fluxo, na janela de velocidade em que eles realmente trabalham o ar.

Mais: um voo mais áspero com flapes trabalhando.

Menos: flapes de aproximação mais suaves.

Por que aqui: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.

Gear buffet0%

Tamborilar da célula pelo trem retrátil pendurado na corrente de ar. Zero para tipos de trem fixo, onde a célula nunca muda de forma.

Mais: mais tamborilar com o trem embaixo.

Menos: um voo com trem embaixo mais limpo.

Por que aqui: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.

Stick shaker50%

O zumbido dedicado do stick shaker de estol, disparado pelo próprio sistema de aviso do avião. Só tipos com shaker real recebem valor; o resto confia no buffet aerodinâmico e na buzina.

Mais: um shaker mais duro.

Menos: um shaker mais discreto.

Por que aqui: Sets triggered shaker strength; inactive while the shaker feature is disabled.

Effect gains · Engine, mechanical & drag

Touchdown thump65%

O golpe único quando as rodas tocam a pista, escalado pela razão de descida: um pouso macio sussurra, uma chegada firme bate.

Mais: um golpe mais duro no toque.

Menos: chegadas mais suaves.

Por que aqui: Sets landing-impact strength; landing telemetry and response shape determine the pulse.

Reverse rumble0%

Vibração na corrida enquanto o reverso ou as hélices em beta trabalham. Zero para tipos sem reverso.

Mais: uma corrida mais áspera sob reverso.

Menos: um reverso mais discreto.

Por que aqui: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.

Engine rumble12%

Vibração contínua do grupo motopropulsor seguindo a rotação entre marcha lenta e potência máxima, o lembrete sempre presente de que algo queima combustível lá na frente.

Mais: mais motor no manche.

Menos: um motor mais discreto.

Por que aqui: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.

Flap motion0%

Vibração contínua apenas enquanto o simulador informa as superfícies de flape realmente em movimento. Segue o movimento e as falhas reais do atuador, não um cronômetro estimado.

Mais: mais vibração com os flapes em movimento.

Menos: cursos de flape mais discretos.

Por que aqui: Sets texture from observed flap movement; a command without movement does not establish the cue.

Autopilot follow

AP follow authority10%

Quanto os comandos do piloto automático podem mover fisicamente o manche. Mantido minúsculo no MSFS, onde um eixo movido pode ser lido de volta como entrada do piloto; zero desativa o seguimento por completo.

Mais: o piloto automático move seu manche visivelmente mais.

Menos: um seguimento quase imperceptível.

Por que aqui: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.

Stick feel

StickFeel · Trim feel enabledTrue

Whether this feature is active in this profile.

Por que aqui: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.

StickFeel · Trim relief enabledTrue

Whether this feature is active in this profile.

Por que aqui: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.

StickFeel · Force trim enabledFalse

Whether this feature is active in this profile.

Por que aqui: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.

StickFeel · G load enabledTrue

Whether this feature is active in this profile.

Por que aqui: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.

StickFeel · Rate damping enabledTrue

Whether this feature is active in this profile.

Por que aqui: Enables rate damping with the configured coefficients and control law.

Autopilot

Autopilot · Follow enabledFalse

Whether this feature is active in this profile.

Por que aqui: Autopilot following is off; the configured spring and load retain the hardware feel.

Autopilot · Neutral hold enabledFalse

Whether this feature is active in this profile.

Por que aqui: Permits centering hold during a supported AP state, separate from following a moving target.

Autopilot · Neutral hold strength0.6

Por que aqui: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.

Aero

Aero · EnabledTrue

Whether this feature is active in this profile.

Por que aqui: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.

Aero · Max flap index1

Where this effect reaches full strength (or has fully faded, for washouts).

Mais: a more gradual build to a later peak.

Menos: a quicker build.

Por que aqui: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.

Aero · Min flap index1

Where this effect begins fading in.

Mais: the effect begins later.

Menos: it begins earlier.

Por que aqui: Sets the first flap detent that admits buffet; this is a handle index, not degrees.

Aero · Shaker enabledFalse

Whether this feature is active in this profile.

Por que aqui: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.

Ground

Ground · EnabledTrue

Whether this feature is active in this profile.

Por que aqui: Enables ground effects; each still needs its own strength and contact or motion telemetry.

Engine

Engine · EnabledTrue

Whether this feature is active in this profile.

Por que aqui: Enables engine cues with nonzero settings and valid running-engine telemetry.

Mechanical

Mechanical · EnabledTrue

Whether this feature is active in this profile.

Por que aqui: Enables accessory cues with configured strengths and observed accessory movement.

Mechanical · Gain0

The strength of this effect.

Mais: a stronger effect.

Menos: a weaker one.

Por que aqui: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.

Todas as configurações do perfil
Configurações estimadas do perfil
ParâmetroValorO que controla e por quê
Spring strength0.64 The spring supplies the biplane’s selected stick resistance. The baseline spring is 0.64. Its low-speed blend reaches baseline strength at 32.5 KIAS.
Spring deadband0.045 Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Force gain0.8 The aerodynamic-load gain is 0.8 with an indicated-speed reference of 65 KIAS. This supplies speed-dependent loading alongside the spring.
Master gain0.85 Scales overall profile strength while preserving effect balance, subject to device and output limits.
Dynamic-pressure blendTrue Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Minimum spring factor0.5 Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring wake-up speed9.1 ktSets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring full-strength speed32.5 ktSets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Velocidade de ajuste de força65.0 ktSets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Airspeed spring stiffening0.15 The high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 32.5 KIAS, with the squared-speed ratio capped at 5.
Airspeed stiffening cap5 Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron force scale0.6 Roll and pitch aerodynamic scales are 0.6 and 0.78, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scale0.78 Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Maximum output force0.55 Caps directed-force output. Native spring effects and device limits remain separate.
StickFeel · Trim feel enabledTrue Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledTrue Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Elevator authority0.3 A period cockpit’s equipment and the profile’s trim response are separate descriptions. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.
StickFeel · Aileron authority0 Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
StickFeel · Force trim enabledFalse Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledTrue Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledTrue Enables rate damping with the configured coefficients and control law.
Autopilot · Follow enabledFalse Autopilot following is off; the configured spring and load retain the hardware feel.
Autopilot · Follow authority0.1 Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot · Neutral hold enabledFalse Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.6 Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero · EnabledTrue Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Gain0.35 Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Aero · Gain0 Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Aero · Gain0 Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Aero · Max flap index1 Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index1 Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Gain0 Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Aero · Shaker enabledFalse Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Aero · Amplitude0.5 Sets triggered shaker strength; inactive while the shaker feature is disabled.
Ground · EnabledTrue Enables ground effects; each still needs its own strength and contact or motion telemetry.
Ground · Gain0.4 Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Ground · Gain0.25 Sets gear-bump texture during ground motion, separate from touchdown impact.
Ground · Gain0.65 Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Ground · Gain0 Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine · EnabledTrue Enables engine cues with nonzero settings and valid running-engine telemetry.
Engine · Gain0.12 Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Mechanical · EnabledTrue Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0 Sets texture from observed flap movement; a command without movement does not establish the cue.
Mechanical · Gain0 Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Fontes públicas 11
  1. Curtiss JN JennyResearch background · Wikipedia revision 1030672134 · retrieved 2026-09-12
  2. JN4_Jenny_MSFS_Manual v2Gathered developer documentation
  3. Click here to open the Curtiss JN-4 Jenny ManualCurtiss JN-4 Jenny
  4. JN4_Jenny_FS24_Manual
  5. Microsoft Flight Simulator aircraft manuals
  6. MSFS 2024 FAQ and edition aircraft inventory
  7. MSFS 2020 FAQ and edition aircraft inventory
  8. Letters From a WWI Jenny PilotWilliam Crawford Woods, using grandfather Louis Crawford’s letters and journal · February 2014
  9. Curtiss Jenny Time MachineTracy · 26 February 2010
  10. A Lady Named Jenny: flight report, page twoAir Progress report from the mid-1970s, republished by its author
  11. Flying Miss JennyMike Collins interviews Dorian Walker · 13 June 2016

Comunidade e correções

Se a sua experiência no tipo diz que esta página errou, corrija aqui.

Correções de pilotos

Voa esta aeronave? Corrija esta página.

Esta página é construída com referências citadas, e experiência real no tipo vale mais que citação. Cite a afirmação errada e conte o que a aeronave real faz. As correções vão ao mantenedor para revisão e alimentam a próxima revisão desta pesquisa.

Papo de hangar

Conversa aberta sobre voar e ajustar o Curtiss JN-4 Jenny, no fórum da comunidade. As correções acima vão em particular ao mantenedor; o papo de hangar é público.

Ainda não há papo de hangar sobre o Curtiss JN-4 Jenny. Seja quem começa.

Comunidade

Perfis da comunidade para esta aeronave

Ainda não há perfis da comunidade para esta aeronave. Ajustou do seu jeito? Compartilhe um perfil e ele aparecerá aqui.