Forty-five minutes over Cascina Costa
The first AW139 flew from Cascina Costa di Samarate on 3 February 2001. Its 45-minute sortie included hovering, lateral and forward flight, with checks of handling and aircraft systems.
The AW139 type certificate describes two PT6C engines, a five-blade main rotor, four-blade tail rotor and retractable tricycle landing gear. Its rotor-speed limits distinguish powered and unpowered operation, and VNE changes with altitude, temperature and power state.
Mais sobre esta aeronave no AirframeDB
The first AW139 flew from Cascina Costa di Samarate on 3 February 2001. Its 45-minute sortie included hovering, lateral and forward flight, with checks of handling and aircraft systems.
Initial deliveries began in early 2004. By Leonardo’s 2021 anniversary account, the helicopter was serving offshore transport alongside rescue, air ambulance, law-enforcement and other public-service roles. Assembly in Italy and Philadelphia supported that expanding customer base.
By its February 2021 anniversary review, Leonardo reported more than three million fleet hours and customers in over seventy countries. Its account divided the fleet across offshore transport and public-service work such as rescue, air ambulance and law enforcement. That history explains the range of cabin, rescue and mission equipment associated with the AW139. The figures are a dated programme snapshot, while the long-nose X-Rotors aircraft identifies the specific simulator configuration.
X-Rotors' long-nose X-Plane 12 aircraft includes Primus Epic Phase 7 avionics, a four-axis flight director and separate cyclic and collective force-trim functions. Winch, float and filter fits are offered.
The twin-engine AW139 with a five-blade main rotor and retractable gear.
The spring stays independent of airspeed. Directed aerodynamic loading is omitted.
Local force trim is off. Autopilot following is off.
Five main rotor blades and retractable wheeled landing gear.
X-Rotors' long-nose X-Plane 12 aircraft includes Primus Epic Phase 7 avionics, a four-axis flight director and separate cyclic and collective force-trim functions. Winch, float and filter fits are offered.
Strengths are normalized hardware-feel settings. They set the effect balance; hand force depends on the device and its limits. The IAS reference is a tuning value.
A escala final de saída aplicada a tudo que o modelo produz, antes do teto do dispositivo.
Mais: tudo (mola, cargas, efeitos) fica mais forte junto.
Menos: tudo amacia junto.
Por que aqui: Scales overall profile strength while preserving effect balance, subject to device and output limits.
A força base de centragem que puxa o manche de volta ao centro. Todas as outras forças se empilham sobre ela. Baixa demais e o manche parece frouxo em voo normal; alta demais e ele briga com sua mão e mascara os sinais menores por cima.
Mais: uma centragem mais firme que resiste mais à mão.
Menos: um manche mais mole que depende só da carga aerodinâmica.
Por que aqui: Rotor blades: Five main · four tail. The baseline spring is 0.1. Low-speed spring blending is off.
Leonardo AW139 Long Nose — aircraft documentationLeonardo AW139 Long Nose — simulator documentationUma escala mestra sobre as duas cargas sustentadas de eixo, aplicada antes do balanço independente delas. Os perfis normalmente a deixam quieta e ajustam as duas cargas de eixo.
Mais: os dois eixos carregam mais forte.
Menos: os dois eixos aliviam juntos.
Por que aqui: The 0 gain omits sustained directed airspeed loading. Spring resistance remains independent.
A carga sustentada de arfagem da deflexão do profundor e da velocidade, balanceada independentemente da rolagem. É a alavanca principal por trás do peso de arfagem de um tipo. Não toca aileron, mola, compensador nem forças de buffet.
Mais: esforços sustentados de arfagem mais pesados em velocidade.
Menos: um profundor mais leve, com menos músculo para segurar.
Por que aqui: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
A carga sustentada de rolagem da deflexão dos ailerons e da velocidade, balanceada independentemente da arfagem. Junto com a carga do profundor define a razão de harmonia de comandos de que falam as resenhas.
Mais: esforços de rolagem mais pesados.
Menos: ailerons mais leves e vivos.
Por que aqui: Roll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled.
Um teto sobre cada força estável de arfagem ou rolagem antes de chegar ao dispositivo, protegendo contra pancadas ou saturação do hardware em manobras fortes.
Mais: picos de força estável mais altos antes do corte.
Menos: um teto mais suave; manobras duras achatam antes.
Por que aqui: Caps directed-force output. Native spring effects and device limits remain separate.
A velocidade indicada em que a carga aerodinâmica atinge seu nível pleno de projeto. Ela ancora toda a curva de carga à faixa real de velocidades do avião: um 172 carrega por volta de 110 nós, um jato bem depois.
Mais: as cargas chegam mais tarde; o manche fica leve até mais velocidade.
Menos: as cargas chegam antes e o cruzeiro pesa mais.
Por que aqui: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Uma pequena zona neutra ao redor do centro onde a mola fica quieta, para que movimentos mínimos em repouso não trepidem. Mais larga é mais calma porém mais solta; mais estreita é mais precisa mas pode tremer no centro.
Mais: um centro mais calmo porém mais solto, com mais folga.
Menos: um centro mais apertado que pode tremer em repouso.
Por que aqui: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Ativa a janela de engate da mola em baixa velocidade (nós de início/pleno acima). Desligado, a mola é constante em todas as velocidades.
Por que aqui: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Quanto da mola sobrevive parado, antes que a velocidade possa gerar força aerodinâmica. Um piso alto mantém o manche estacionado firme; um piso baixo dá a sensação solta, de cabos com folga, de um avião leve estacionado.
Mais: um manche mais firme estacionado e no táxi.
Menos: um manche mole estacionado que só desperta com velocidade.
Por que aqui: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
A velocidade em que a mola começa a subir do piso de baixa velocidade rumo à força plena: os comandos "ganhando vida" na corrida de decolagem.
Por que aqui: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
A velocidade em que a mola atinge força plena. Entre o início e este ponto, a centragem endurece progressivamente à medida que o fluxo de ar cresce sobre os comandos.
Por que aqui: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Quanto a própria centragem endurece com a velocidade, além das cargas de deflexão. Zero mantém a sensação de centro constante; mais faz o manche centrar mais duro em cruzeiro e mais solto no circuito.
Mais: um centro que endurece nitidamente com a velocidade.
Menos: uma sensação de centro constante em qualquer velocidade.
Por que aqui: Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase.
O limite superior do endurecimento de centro pela velocidade, para que voos muito rápidos não tensionem a mola sem freio.
Mais: mais endurecimento total permitido em alta velocidade.
Menos: o endurecimento corta antes.
Por que aqui: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Com que força o compensador de profundor alivia o esforço de arfagem mantido e desloca onde o manche assenta. Em 100 %, um avião bem compensado não precisa de pressão mantida: o fluxo de trabalho de compensar-a-carga do voo real.
Mais: o compensador tira mais esforço mantido; em 100 %, todo compensado o anula.
Menos: você segue segurando esforço mesmo compensado.
Por que aqui: Scales supported pitch-trim relief and permitted centre movement. Zero removes pitch response.
O mesmo alívio para o compensador de rolagem. A maioria dos tipos de aviação geral não tem compensador de aileron real, então isto fica em zero; tipos com compensador de rolagem recebem um valor correspondente.
Mais: o compensador de rolagem tira mais esforço mantido.
Menos: o compensador de rolagem faz menos.
Por que aqui: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Vibração de rolagem no solo pela velocidade das rodas e tipo de superfície: asfalto, grama ou cascalho sob o trem.
Mais: uma textura de superfície mais forte no manche.
Menos: um táxi mais liso.
Por que aqui: Gear-motion and wheel-contact texture are estimates. No skid-scrape, float or winch force is assigned without qualified contact/load telemetry.
Solavancos curtos e discretos de juntas de dilatação, sulcos e superfície irregular, pontuando o ronco contínuo.
Mais: solavancos mais nítidos de juntas e sulcos.
Menos: detalhes de solo mais suaves.
Por que aqui: Sets gear-bump texture during ground motion, separate from touchdown impact.
Sacudida da célula ao se aproximar do estol e enquanto o aviso soa: quão alto esta asa anuncia que está infeliz. Tipos de quebra seca recebem buffet modesto e deixam a buzina levar o aviso.
Mais: um tremor pré-estol mais forte.
Menos: uma asa mais discreta; a buzina leva o aviso.
Por que aqui: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Buffet transônico ao se aproximar do limite de Mach. Significativo para jatos perto de MMO, zero para pistões e turboélices que nunca chegam lá.
Mais: um buffet transônico mais forte perto do limite de Mach.
Menos: um voo mais liso em Mach alto.
Por que aqui: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Vibração de baixa frequência da célula com flapes estendidos no fluxo, na janela de velocidade em que eles realmente trabalham o ar.
Mais: um voo mais áspero com flapes trabalhando.
Menos: flapes de aproximação mais suaves.
Por que aqui: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Tamborilar da célula pelo trem retrátil pendurado na corrente de ar. Zero para tipos de trem fixo, onde a célula nunca muda de forma.
Mais: mais tamborilar com o trem embaixo.
Menos: um voo com trem embaixo mais limpo.
Por que aqui: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
O zumbido dedicado do stick shaker de estol, disparado pelo próprio sistema de aviso do avião. Só tipos com shaker real recebem valor; o resto confia no buffet aerodinâmico e na buzina.
Mais: um shaker mais duro.
Menos: um shaker mais discreto.
Por que aqui: Sets triggered shaker strength; inactive while the shaker feature is disabled.
O golpe único quando as rodas tocam a pista, escalado pela razão de descida: um pouso macio sussurra, uma chegada firme bate.
Mais: um golpe mais duro no toque.
Menos: chegadas mais suaves.
Por que aqui: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Vibração na corrida enquanto o reverso ou as hélices em beta trabalham. Zero para tipos sem reverso.
Mais: uma corrida mais áspera sob reverso.
Menos: um reverso mais discreto.
Por que aqui: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Vibração contínua do grupo motopropulsor seguindo a rotação entre marcha lenta e potência máxima, o lembrete sempre presente de que algo queima combustível lá na frente.
Mais: mais motor no manche.
Menos: um motor mais discreto.
Por que aqui: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Vibração contínua apenas enquanto o simulador informa as superfícies de flape realmente em movimento. Segue o movimento e as falhas reais do atuador, não um cronômetro estimado.
Mais: mais vibração com os flapes em movimento.
Menos: cursos de flape mais discretos.
Por que aqui: Sets texture from observed flap movement; a command without movement does not establish the cue.
Quanto os comandos do piloto automático podem mover fisicamente o manche. Mantido minúsculo no MSFS, onde um eixo movido pode ser lido de volta como entrada do piloto; zero desativa o seguimento por completo.
Mais: o piloto automático move seu manche visivelmente mais.
Menos: um seguimento quase imperceptível.
Por que aqui: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
The strength of this effect.
Mais: a stronger effect.
Menos: a weaker one.
Por que aqui: Gear-motion and wheel-contact texture are estimates. No skid-scrape, float or winch force is assigned without qualified contact/load telemetry.
Whether this feature is active in this profile.
Por que aqui: Enables accessory cues with configured strengths and observed accessory movement.
Whether this feature is active in this profile.
Por que aqui: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Whether this feature is active in this profile.
Por que aqui: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Whether this feature is active in this profile.
Por que aqui: X-Rotors' long-nose X-Plane 12 aircraft includes Primus Epic Phase 7 avionics, a four-axis flight director and separate cyclic and collective force-trim functions. Local force trim is off. The stored latch parameters are inactive; the profile does not supply a local hold-where-left neutral.
Leonardo AW139 Long Nose — aircraft documentationLeonardo AW139 Long Nose — simulator documentationWhether this feature is active in this profile.
Por que aqui: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Whether this feature is active in this profile.
Por que aqui: Enables rate damping with the configured coefficients and control law.
Whether this feature is active in this profile.
Por que aqui: Autopilot following is off; the configured spring and load retain the hardware feel.
Whether this feature is active in this profile.
Por que aqui: Permits centering hold during a supported AP state, separate from following a moving target.
Por que aqui: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Whether this feature is active in this profile.
Por que aqui: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Where this effect reaches full strength (or has fully faded, for washouts).
Mais: a more gradual build to a later peak.
Menos: a quicker build.
Por que aqui: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Where this effect begins fading in.
Mais: the effect begins later.
Menos: it begins earlier.
Por que aqui: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Whether this feature is active in this profile.
Por que aqui: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Whether this feature is active in this profile.
Por que aqui: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Whether this feature is active in this profile.
Por que aqui: Enables engine cues with nonzero settings and valid running-engine telemetry.
| Parâmetro | Valor | O que controla e por quê |
|---|---|---|
| Spring strength | 0.1 | Rotor blades: Five main · four tail. The baseline spring is 0.1. Low-speed spring blending is off. |
| Force gain | 0 | The 0 gain omits sustained directed airspeed loading. Spring resistance remains independent. |
| Elevator force scale | 1 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Aileron force scale | 1 | Roll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| StickFeel · Elevator authority | 0 | Scales supported pitch-trim relief and permitted centre movement. Zero removes pitch response. |
| StickFeel · Aileron authority | 0 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| Velocidade de ajuste de força | 135 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Mechanical · Gain | 0.02 | Gear-motion and wheel-contact texture are estimates. No skid-scrape, float or winch force is assigned without qualified contact/load telemetry. |
| Ground · Gain | 0.1 | Gear-motion and wheel-contact texture are estimates. No skid-scrape, float or winch force is assigned without qualified contact/load telemetry. |
| Spring deadband | 0.02 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Master gain | 0.65 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | False | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 1 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 19.6 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 70.0 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Airspeed spring stiffening | 0 | Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| StickFeel · Trim feel enabled | False | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | False | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Force trim enabled | False | X-Rotors' long-nose X-Plane 12 aircraft includes Primus Epic Phase 7 avionics, a four-axis flight director and separate cyclic and collective force-trim functions. Local force trim is off. The stored latch parameters are inactive; the profile does not supply a local hold-where-left neutral. |
| StickFeel · G load enabled | True | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | False | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot · Follow authority | 0.05 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | False | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.6 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 1 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 1 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | True | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0.08 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0.2 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | True | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
Se a sua experiência no tipo diz que esta página errou, corrija aqui.
Esta página é construída com referências citadas, e experiência real no tipo vale mais que citação. Cite a afirmação errada e conte o que a aeronave real faz. As correções vão ao mantenedor para revisão e alimentam a próxima revisão desta pesquisa.
Conversa aberta sobre voar e ajustar o Leonardo AW139 Long Nose, no fórum da comunidade. As correções acima vão em particular ao mantenedor; o papo de hangar é público.