Julian Herzog (Website) · CC BY 4.0 · Airbus A320 in Lufthansa colours.The original A320 first flew in 1987 and entered service in 1988. Airbus subsequently stretched the design into the A321 and shortened it into the A319 and A318. The family made digital fly-by-wire and sidestick controls familiar to a large part of the airline world.
The A319, A321 and A320neo differ in fuselage length, engines, fuel arrangements and equipment. In the simulator, the original bundled A320neo, the later V2 aircraft and independent developers' products also have their own systems and documentation.
Airbus A320neo
Mais sobre esta aeronave no AirframeDB
The A320 brought side-stick controllers and a two-person glass flight deck into the Airbus single-aisle family. Its low wing carries two turbofan engines, while the airframe combines conventional construction with composite structures in selected areas. The family label spans several fuselage lengths and engine generations; cockpit resemblance alone does not identify an A319, A320 or A321, or establish what a particular simulator package includes.
First flight: 22 February 1987 ( 1987-02-22 )
Direct sidestick position, rudder animation including trim, trim-actuator feedback and hydraulic circuit pressure are distinct signals.
Several familiar AUTOPILOT_ACTIVE and FMA variables are now listed as deprecated; a historical binding list is insufficient for current mappings.
The developer warns that generic PFD values bypass the add-on sensor model. Some autopilot selections are exceptions using standard datarefs.
Direct-law transition logic now uses actual gear-not-uplocked state rather than lever position; cockpit-output datarefs also changed.
Botley had flown easyJet liveries in Microsoft Flight Simulator as a child. In March 2019, during the week of his twenty-fifth birthday, he finally joined the airline's base training in a real Airbus. His first planned turn was postponed when the aircraft had to leave before everyone completed their circuits. Four days later, at Châteauroux, he waited through his classmates' turns before climbing into the right seat himself.
The aircraft seemed much bigger outside than the simulator had conveyed. At the controls, nerves gave way to the familiar procedures of his type rating, followed by the physical sensation of the engines accelerating the aircraft. He completed six circuits and then flew part of the return to Stansted. The captain and safety pilot took over for the arrival because of the wind limits. No passengers were aboard the flight.
Writing as PWJ flying, the author closes his training blog after passing his British Airways line check. The final months had brought company induction, safety training, more simulator work and circuits in an empty A320 under the supervision of experienced training captains. He then moved into passenger flying around Europe, initially with a safety pilot as well as a training captain. His first line-training flight went to Venice.
He remembers that first working day as a rush of activity, despite all the preparation. There was a great deal to absorb, but he enjoyed the challenge and gradually felt at home in the right seat. Between tasks on longer sectors, the view of the Alps, Spain and the French coast offered occasional rewards. After release from training, his first regular assignment took him to Larnaca. He describes formal training ending while a pilot's development continues throughout a career.
Hoteit tells Rosalind Azouzi how a challenge at university led her to apply for airline pilot training, changing a future she had imagined in mathematics. Her career included A320 charter work from Cuba, Venezuela and the Greek islands before command training on the A320/A321. She remembers her first flight as captain, from Beirut to Amman on 16 March 2011, as her proudest career milestone.
In the interview, she connects airline flying with the ability to solve unfamiliar problems and work effectively with a different crew on each trip. Acceptance had taken time in a profession where she encountered resistance as a woman, but encouragement from colleagues and passengers mattered to her. Family support helped her combine flying, motherhood and further university study. She hoped her progress would encourage more women to enter the cockpit. This is a career account from an A320/A321 captain, rather than a handling review.
The original A320 first flew in 1987 and entered service in 1988. Airbus subsequently stretched the design into the A321 and shortened it into the A319 and A318. The family made digital fly-by-wire and sidestick controls familiar to a large part of the airline world.
This starting point selects Airbus A321LR. Its aircraft-level settings do not select a particular developer’s custom systems.
The spring stays independent of airspeed. Directed aerodynamic loading is omitted.
Pitch-trim relief is off. Autopilot following is off.
Airbus's cockpit description establishes sidesticks and digital fly-by-wire across this family. FlyByWire's A32NX documentation describes passive spring centering, separate sidestick priority and no autopilot backdrive. That A32NX account is mechanism context for the family, rather than an interface specification for Fenix, ToLiss or another add-on. Aircraft autotrim and control-law changes act on aircraft response without creating a new aerodynamic load at a passive stick.
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
A escala final de saída aplicada a tudo que o modelo produz, antes do teto do dispositivo.
Mais: tudo (mola, cargas, efeitos) fica mais forte junto.
Menos: tudo amacia junto.
Por que aqui: Scales overall profile strength while preserving effect balance, subject to device and output limits.
A força base de centragem que puxa o manche de volta ao centro. Todas as outras forças se empilham sobre ela. Baixa demais e o manche parece frouxo em voo normal; alta demais e ele briga com sua mão e mascara os sinais menores por cima.
Mais: uma centragem mais firme que resiste mais à mão.
Menos: um manche mais mole que depende só da carga aerodinâmica.
Por que aqui: Fixed centering represents the passive Airbus sidestick. Pitch and roll spring-travel curves may differ without adding direct surface-force feedback. The baseline spring is 0.55. Low-speed spring blending is off.
Cockpit and flight control familiesSidestick controlsUma pequena zona neutra ao redor do centro onde a mola fica quieta, para que movimentos mínimos em repouso não trepidem. Mais larga é mais calma porém mais solta; mais estreita é mais precisa mas pode tremer no centro.
Mais: um centro mais calmo porém mais solto, com mais folga.
Menos: um centro mais apertado que pode tremer em repouso.
Por que aqui: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Por que aqui: The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim.
Por que aqui: Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual.
Uma escala mestra sobre as duas cargas sustentadas de eixo, aplicada antes do balanço independente delas. Os perfis normalmente a deixam quieta e ajustam as duas cargas de eixo.
Mais: os dois eixos carregam mais forte.
Menos: os dois eixos aliviam juntos.
Por que aqui: The stored 0.04 aerodynamic-load gain is inactive under the fixed-centre control law.
Ativa a janela de engate da mola em baixa velocidade (nós de início/pleno acima). Desligado, a mola é constante em todas as velocidades.
Por que aqui: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Quanto da mola sobrevive parado, antes que a velocidade possa gerar força aerodinâmica. Um piso alto mantém o manche estacionado firme; um piso baixo dá a sensação solta, de cabos com folga, de um avião leve estacionado.
Mais: um manche mais firme estacionado e no táxi.
Menos: um manche mole estacionado que só desperta com velocidade.
Por que aqui: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
A velocidade em que a mola começa a subir do piso de baixa velocidade rumo à força plena: os comandos "ganhando vida" na corrida de decolagem.
Por que aqui: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
A velocidade em que a mola atinge força plena. Entre o início e este ponto, a centragem endurece progressivamente à medida que o fluxo de ar cresce sobre os comandos.
Por que aqui: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
A velocidade indicada em que a carga aerodinâmica atinge seu nível pleno de projeto. Ela ancora toda a curva de carga à faixa real de velocidades do avião: um 172 carrega por volta de 110 nós, um jato bem depois.
Mais: as cargas chegam mais tarde; o manche fica leve até mais velocidade.
Menos: as cargas chegam antes e o cruzeiro pesa mais.
Por que aqui: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Quanto a própria centragem endurece com a velocidade, além das cargas de deflexão. Zero mantém a sensação de centro constante; mais faz o manche centrar mais duro em cruzeiro e mais solto no circuito.
Mais: um centro que endurece nitidamente com a velocidade.
Menos: uma sensação de centro constante em qualquer velocidade.
Por que aqui: Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase.
O limite superior do endurecimento de centro pela velocidade, para que voos muito rápidos não tensionem a mola sem freio.
Mais: mais endurecimento total permitido em alta velocidade.
Menos: o endurecimento corta antes.
Por que aqui: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
A carga sustentada de rolagem da deflexão dos ailerons e da velocidade, balanceada independentemente da arfagem. Junto com a carga do profundor define a razão de harmonia de comandos de que falam as resenhas.
Mais: esforços de rolagem mais pesados.
Menos: ailerons mais leves e vivos.
Por que aqui: Roll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance.
A carga sustentada de arfagem da deflexão do profundor e da velocidade, balanceada independentemente da rolagem. É a alavanca principal por trás do peso de arfagem de um tipo. Não toca aileron, mola, compensador nem forças de buffet.
Mais: esforços sustentados de arfagem mais pesados em velocidade.
Menos: um profundor mais leve, com menos músculo para segurar.
Por que aqui: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Um teto sobre cada força estável de arfagem ou rolagem antes de chegar ao dispositivo, protegendo contra pancadas ou saturação do hardware em manobras fortes.
Mais: picos de força estável mais altos antes do corte.
Menos: um teto mais suave; manobras duras achatam antes.
Por que aqui: Caps directed-force output. Native spring effects and device limits remain separate.
Com que força o compensador de profundor alivia o esforço de arfagem mantido e desloca onde o manche assenta. Em 100 %, um avião bem compensado não precisa de pressão mantida: o fluxo de trabalho de compensar-a-carga do voo real.
Mais: o compensador tira mais esforço mantido; em 100 %, todo compensado o anula.
Menos: você segue segurando esforço mesmo compensado.
Por que aqui: Automatic aircraft trim is separate from the passive sidestick centre, so disabled hardware trim relief preserves the selected fixed-centre approximation. Pitch relief is off, with stored authority 0; roll authority is 0.
Cockpit and flight control familiesSidestick controlsO mesmo alívio para o compensador de rolagem. A maioria dos tipos de aviação geral não tem compensador de aileron real, então isto fica em zero; tipos com compensador de rolagem recebem um valor correspondente.
Mais: o compensador de rolagem tira mais esforço mantido.
Menos: o compensador de rolagem faz menos.
Por que aqui: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Vibração de rolagem no solo pela velocidade das rodas e tipo de superfície: asfalto, grama ou cascalho sob o trem.
Mais: uma textura de superfície mais forte no manche.
Menos: um táxi mais liso.
Por que aqui: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Solavancos curtos e discretos de juntas de dilatação, sulcos e superfície irregular, pontuando o ronco contínuo.
Mais: solavancos mais nítidos de juntas e sulcos.
Menos: detalhes de solo mais suaves.
Por que aqui: Sets gear-bump texture during ground motion, separate from touchdown impact.
Sacudida da célula ao se aproximar do estol e enquanto o aviso soa: quão alto esta asa anuncia que está infeliz. Tipos de quebra seca recebem buffet modesto e deixam a buzina levar o aviso.
Mais: um tremor pré-estol mais forte.
Menos: uma asa mais discreta; a buzina leva o aviso.
Por que aqui: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Buffet transônico ao se aproximar do limite de Mach. Significativo para jatos perto de MMO, zero para pistões e turboélices que nunca chegam lá.
Mais: um buffet transônico mais forte perto do limite de Mach.
Menos: um voo mais liso em Mach alto.
Por que aqui: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Vibração de baixa frequência da célula com flapes estendidos no fluxo, na janela de velocidade em que eles realmente trabalham o ar.
Mais: um voo mais áspero com flapes trabalhando.
Menos: flapes de aproximação mais suaves.
Por que aqui: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Tamborilar da célula pelo trem retrátil pendurado na corrente de ar. Zero para tipos de trem fixo, onde a célula nunca muda de forma.
Mais: mais tamborilar com o trem embaixo.
Menos: um voo com trem embaixo mais limpo.
Por que aqui: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
O zumbido dedicado do stick shaker de estol, disparado pelo próprio sistema de aviso do avião. Só tipos com shaker real recebem valor; o resto confia no buffet aerodinâmico e na buzina.
Mais: um shaker mais duro.
Menos: um shaker mais discreto.
Por que aqui: Sets triggered shaker strength; inactive while the shaker feature is disabled.
O golpe único quando as rodas tocam a pista, escalado pela razão de descida: um pouso macio sussurra, uma chegada firme bate.
Mais: um golpe mais duro no toque.
Menos: chegadas mais suaves.
Por que aqui: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Vibração na corrida enquanto o reverso ou as hélices em beta trabalham. Zero para tipos sem reverso.
Mais: uma corrida mais áspera sob reverso.
Menos: um reverso mais discreto.
Por que aqui: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Vibração contínua do grupo motopropulsor seguindo a rotação entre marcha lenta e potência máxima, o lembrete sempre presente de que algo queima combustível lá na frente.
Mais: mais motor no manche.
Menos: um motor mais discreto.
Por que aqui: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Vibração contínua apenas enquanto o simulador informa as superfícies de flape realmente em movimento. Segue o movimento e as falhas reais do atuador, não um cronômetro estimado.
Mais: mais vibração com os flapes em movimento.
Menos: cursos de flape mais discretos.
Por que aqui: Sets texture from observed flap movement; a command without movement does not establish the cue.
Quanto os comandos do piloto automático podem mover fisicamente o manche. Mantido minúsculo no MSFS, onde um eixo movido pode ser lido de volta como entrada do piloto; zero desativa o seguimento por completo.
Mais: o piloto automático move seu manche visivelmente mais.
Menos: um seguimento quase imperceptível.
Por que aqui: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Whether this feature is active in this profile.
Por que aqui: Applies the configured pitch and roll spring travel curves.
Por que aqui: Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel.
Por que aqui: Sets response at the second roll-curve point; its input position and other points determine the travel law.
Whether this feature is active in this profile.
Por que aqui: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Whether this feature is active in this profile.
Por que aqui: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Whether this feature is active in this profile.
Por que aqui: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
Whether this feature is active in this profile.
Por que aqui: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Whether this feature is active in this profile.
Por que aqui: Enables rate damping with the configured coefficients and control law.
Whether this feature is active in this profile.
Por que aqui: Autopilot following is off; the configured spring and load retain the hardware feel. Separate neutral hold is on at strength 0.28, when a supported autopilot state admits it.
Whether this feature is active in this profile.
Por que aqui: Permits centering hold during a supported AP state, separate from following a moving target.
Por que aqui: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Whether this feature is active in this profile.
Por que aqui: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Where this effect reaches full strength (or has fully faded, for washouts).
Mais: a more gradual build to a later peak.
Menos: a quicker build.
Por que aqui: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Where this effect begins fading in.
Mais: the effect begins later.
Menos: it begins earlier.
Por que aqui: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Whether this feature is active in this profile.
Por que aqui: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Whether this feature is active in this profile.
Por que aqui: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Whether this feature is active in this profile.
Por que aqui: Enables engine cues with nonzero settings and valid running-engine telemetry.
Whether this feature is active in this profile.
Por que aqui: Enables accessory cues with configured strengths and observed accessory movement.
The strength of this effect.
Mais: a stronger effect.
Menos: a weaker one.
Por que aqui: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
| Parâmetro | Valor | O que controla e por quê |
|---|---|---|
| Spring strength | 0.55 | Fixed centering represents the passive Airbus sidestick. Pitch and roll spring-travel curves may differ without adding direct surface-force feedback. The baseline spring is 0.55. Low-speed spring blending is off. |
| Spring deadband | 0.01 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Forces · Center starting force | 0.03 | The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim. |
| Forces · Center starting force transition | 0.05 | Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual. |
| Force gain | 0.04 | The stored 0.04 aerodynamic-load gain is inactive under the fixed-centre control law. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | False | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.5 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 20 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 90 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Velocidade de ajuste de força | 260.0 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0 | Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 1 | Roll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance. |
| Elevator force scale | 1 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| SpringResponse · Travel enabled | True | Applies the configured pitch and roll spring travel curves. |
| SpringResponse · Output | 1 | Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel. |
| SpringResponse · Output | 0.3 | Sets response at the second roll-curve point; its input position and other points determine the travel law. |
| StickFeel · Trim feel enabled | False | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | False | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0 | Automatic aircraft trim is separate from the passive sidestick centre, so disabled hardware trim relief preserves the selected fixed-centre approximation. Pitch relief is off, with stored authority 0; roll authority is 0. |
| StickFeel · Aileron authority | 0 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| StickFeel · G load enabled | False | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | False | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. Separate neutral hold is on at strength 0.28, when a supported autopilot state admits it. |
| Autopilot · Follow authority | 0.05 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | True | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.28 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.06 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0.06 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 4 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | False | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | False | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Se a sua experiência no tipo diz que esta página errou, corrija aqui.
Esta página é construída com referências citadas, e experiência real no tipo vale mais que citação. Cite a afirmação errada e conte o que a aeronave real faz. As correções vão ao mantenedor para revisão e alimentam a próxima revisão desta pesquisa.
Conversa aberta sobre voar e ajustar o Airbus A320 family, no fórum da comunidade. As correções acima vão em particular ao mantenedor; o papo de hangar é público.