Development milestones
First flight: 2 November 1992 ( 1992-11-02 )
Developed from: Airbus A300
FlugzeugbibliothekAirbus A330 family
4300streetcar · CC BY 4.0 · Delta Air Lines A330-300Airbus A330 family
A long-haul twin whose family spans passenger, freight and specialist transport roles.
Airliner19 Profiloptionen
Kenne das Flugzeug
Airbus developed the A330 alongside the four-engine A340. The two programmes shared substantial airframe and cockpit work, but the A330 used two engines. The initial A330-300 entered service in 1994; the shorter A330-200 followed in 1998.
The family includes several engine choices, different fuselage lengths and later A330neo developments. These distinctions reach inside the cockpit: engine indications and fuel arrangements are not identical across every version. The simulator products cover different variants, each with its own developer documentation.
Mehr über dieses Flugzeug auf AirframeDB
Taking a twin-engine airliner to the Antarctic ice
Mirpuri's log describes the preparation behind Hi Fly's A330 mission from Cape Town to Wolf's Fang. The aircraft carried fuel for the return as well as the outward journey, and the team monitored fuel temperature, destination weather and runway condition throughout the flight. Forecast discussions began days beforehand. Ground power and starting equipment at the remote strip were also part of making the twin-engine operation possible.
Four pilots shared the long duty, supported by engineers, cabin crew, a ground coordinator and colleagues at both bases. Mirpuri recalls touching down just before midnight local time, when the Antarctic summer sun was still above the horizon and katabatic winds were beginning to rise. The aircraft stopped as planned, turned and taxied to parking before returning to Cape Town later. His airline-published account stresses the contribution of the whole team to a landing intended to feel uneventful.
A familiar flight deck and a sharper response on approach
Gerzanics flew the A330-800 test aircraft F-WTTO from Toulouse with Airbus test pilot Thomas Wilhelm. Although he did not routinely fly Airbus aircraft, the common cockpit felt familiar. The aircraft was still contributing to flight-control development, and a special display helped him practise the consistent sidestick input needed for the takeoff test. In the air, he found it easy to establish bank angles and roll out accurately on a heading.
On the return, the instrument landing system's glideslope went out of service. Wilhelm suggested using the head-up display while setting up an alternative ground-augmented satellite approach. Gerzanics then assessed the aircraft's response by deliberately offsetting from, and rejoining, the final approach course. He found the response crisp and the landing straightforward. This was an organised evaluation in an instrumented A330-800, including test manoeuvres.
Learning to wait for a larger aircraft’s response
After thirteen years flying the A320 family around Europe, Harder was preparing to return to long-haul work on the A330. He describes receiving the training assignment after applying for a conversion, then working through technical material at home before moving into procedural and full-flight simulators. His Airbus experience shortened part of the training, but the new aircraft still had different systems to learn.
Asked how the A330 felt in the simulator, he noticed a more delayed response to control inputs, reminding him of his earlier experience as a Boeing 747 first officer. He had to allow a little time for the larger aircraft to respond. At the time of the interview, his simulator check and line training still lay ahead. His conversion training took place in the simulator; he had not yet completed his A330 qualification.
Öffentliche Quellen 21
- Airbus A330Research background · Wikipedia revision 1373820047 · retrieved 2026-09-12
- Airbus A330
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- Airbus Beluga XL
- Airbus A330-300 POH
- X-Plane 12 Desktop Manual
- X-Plane aircraft and avionics manuals
- A330-900 change log
- A330 900Official developer / designated store catalogue · checked 2026-09-12
- Captain’s log: landing the first Airbus A330 in AntarcticaCarlos Mirpuri · 5 December 2025
- The flight test of Airbus’s refreshed widebody – the A330neoMike Gerzanics · 2019
- Umschulung auf den Airbus A330 – Upgrade für einen KapitänClaus Harder · 5 May 2023
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- Aerosoft Aircraft A330 neoProduct listing captured 28 September 2026; A330-900neo, MSFS 2024
- A330-300Product listing captured 2026-09-24; edition scope from the reviewed catalogue
- A339X A330-900neoProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- JARDesign 330 Airliner -JARDesign-A330Product listing captured 2026-09-30; edition scope from the reviewed catalogue
- Airbus A330-200 exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- Airbus A330-300 exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- Airbus A330-900neo exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
Wie das Profil es modelliert
Headwind Simulations A339X A330-900 / ACJ330neo
Free + ProMSFS 2020Headwind Simulations
Airbus developed the A330 alongside the four-engine A340. The two programmes shared substantial airframe and cockpit work, but the A330 used two engines. The initial A330-300 entered service in 1994; the shorter A330-200 followed in 1998.
This profile selects Headwind Simulations A339X A330-900 / ACJ330neo for MSFS 2020.
The spring stays independent of airspeed. Directed aerodynamic loading is omitted.
Pitch-trim relief is off. Autopilot following is off.
Diese genaue Revision wurde noch nicht für die öffentliche Installation freigegeben.
Controls and trim
The A330 cockpit uses Airbus sidesticks and fly-by-wire. The bundled manual separates the -200/-300 fuel and trim-tank arrangements, while the Beluga XL has its own flight-control and autopilot guide. A330neo, passenger-to-freighter and corporate configurations retain their model identities. Aircraft trim and autopilot guidance belong to the flight-control system; they do not establish surface-airload feedback through a passive stick.
The selected implementation
Headwind's Trent 7000 A330-941 and corporate ACJ330neo share selected control architecture. A VIP cabin does not justify a different passive-stick spring.
About the values
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
Master gain & control system
Master gain85%
Die letzte Gesamtskalierung über alles, was das Modell erzeugt, vor der Gerätegrenze.
Mehr: alles (Feder, Lasten, Effekte) wird gemeinsam stärker.
Weniger: alles wird gemeinsam weicher.
Warum hier: Scales overall profile strength while preserving effect balance, subject to device and output limits.
Forces
Spring strength55%
Die Grundzentrierkraft, die den Stick zur Mitte zieht. Jede andere Kraft baut darauf auf. Zu niedrig fühlt sich der Stick im Normalflug schlaff an; zu hoch kämpft er gegen deine Hand und überdeckt die feineren Signale.
Mehr: festere Zentrierung, die der Hand jederzeit mehr widersteht.
Weniger: ein schlafferer Stick, der sich allein auf die aerodynamische Last stützt.
Warum hier: Fixed sidestick centering represents the Airbus control arrangement while keeping aircraft control-law behavior separate from hardware resistance. The baseline spring is 0.55. Low-speed spring blending is off.
Cockpit and flight control familiesAirbus A330Airbus Beluga XLSpring deadband1%
Eine kleine neutrale Zone um die Mitte, in der die Feder ruhig bleibt, damit kleinste Bewegungen im Stand nicht flattern. Breiter ist ruhiger, aber lockerer; enger ist präziser, kann aber um die Mitte zittern.
Mehr: eine ruhigere, aber lockerere Mitte mit mehr Spiel.
Weniger: eine straffere Mitte, die in Ruhe zittern kann.
Warum hier: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Forces · Center starting force0.03
Warum hier: The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim.
Forces · Center starting force transition0.05
Warum hier: Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual.
Overall aerodynamic load24%
Ein Gesamtmaß über beide anhaltenden Achslasten, vor ihrer Einzelbalance angewendet. Profile lassen es normalerweise stehen und stimmen die beiden Achslasten ab.
Mehr: beide Achsen laden härter auf.
Weniger: beide Achsen werden gemeinsam leichter.
Warum hier: The stored 0.24 aerodynamic-load gain is inactive under the fixed-centre control law.
Airspeed blendingFalse
Aktiviert das Niedrigfahrt-Einblendfenster der Feder (Beginn/Voll in Knoten oben). Aus bleibt die Feder bei jeder Fahrt konstant.
Warum hier: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Low-speed spring floor55%
Wie viel Feder im Stillstand übrig bleibt, bevor Fahrt überhaupt aerodynamische Kraft aufbauen kann. Ein hoher Sockel hält den geparkten Stick straff; ein niedriger ergibt das lose Seilzuggefühl eines geparkten Leichtflugzeugs.
Mehr: ein festerer Stick beim Parken und Rollen.
Weniger: ein schlaffer geparkter Stick, der erst mit Fahrt aufwacht.
Warum hier: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring engagement start20 kt
Die Fahrt, ab der die Feder vom Niedrigfahrt-Sockel Richtung volle Stärke steigt: der Beginn des "Lebendigwerdens" der Ruder im Startlauf.
Warum hier: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring engagement full70 kt
Die Fahrt, bei der die Feder volle Stärke erreicht. Zwischen Beginn und diesem Punkt strafft sich die Zentrierung zunehmend mit der Anströmung.
Warum hier: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Geschwindigkeit zur Kraftabstimmung250
Die angezeigte Fahrt, bei der die aerodynamische Last ihr ausgelegtes Vollniveau erreicht. Sie verankert die gesamte Lastkurve am realen Geschwindigkeitsbereich: eine 172 lädt bis 110 Knoten auf, ein Jet viel später.
Mehr: Lasten kommen später; der Stick bleibt bis zu höherer Fahrt leicht.
Weniger: Lasten kommen früher, und die Reise fühlt sich schwerer an.
Warum hier: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Centre firmness vs speed0%
Wie stark sich die Zentrierung selbst mit der Fahrt strafft, zusätzlich zu den Ausschlaglasten. Null hält das Mittengefühl konstant; mehr lässt den Stick im Reiseflug härter und im Anflug lockerer zentrieren.
Mehr: eine Mitte, die mit Fahrt spürbar härter wird.
Weniger: konstantes Mittengefühl bei jeder Fahrt.
Warum hier: Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase.
Centre stiffening cap2
Die Obergrenze der fahrtabhängigen Mittenstraffung, damit sehr hohe Fahrt die Feder nicht grenzenlos aufzieht.
Mehr: mehr Gesamtstraffung bei hoher Fahrt erlaubt.
Weniger: die Straffung klemmt früher ab.
Warum hier: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron load65%
Die anhaltende Rolllast aus Querruderausschlag und Fahrt, unabhängig vom Nick balanciert. Zusammen mit der Höhenruderlast bestimmt sie die Ruderharmonie, von der Testberichte sprechen.
Mehr: schwerere Rollkräfte.
Weniger: leichtere, quirligere Querruder.
Warum hier: Roll and pitch aerodynamic scales are 0.65 and 0.86, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance.
Elevator load86%
Die anhaltende Nicklast aus Höhenruderausschlag und Fahrt, unabhängig von der Rollachse balanciert. Der Haupthebel für das Nickgewicht eines Musters. Er verändert weder Querruder, Feder, Trimmung noch Schüttelkräfte.
Mehr: schwerere anhaltende Nickkräfte bei Fahrt.
Weniger: ein leichteres Höhenruder, das weniger Muskel braucht.
Warum hier: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Max output force55%
Eine Kappe je stetiger Nick- oder Rollkraft vor dem Gerät. Der Schutz davor, die Hardware in harten Manövern zu überfahren oder zu sättigen.
Mehr: stärkere Spitzenkräfte vor dem Abschneiden.
Weniger: eine sanftere Decke; harte Manöver flachen früher ab.
Warum hier: Caps directed-force output. Native spring effects and device limits remain separate.
Trim
Trim relief (elevator)0%
Wie stark Höhenrudertrimmung die gehaltene Nickkraft abbaut und den Ruhepunkt des Sticks verschiebt. Bei 100 % braucht ein sauber getrimmtes Flugzeug keinen gehaltenen Druck: das Wegtrimmen der Last wie im echten Fliegen.
Mehr: Trimmung nimmt mehr der gehaltenen Nickkraft; bei 100 % nullt volle Trimmung sie.
Weniger: du hältst auch getrimmt weiter Kraft.
Warum hier: Aircraft automatic trim is independent of the selected passive stick centre; the trim-tank arrangement is not a hardware trim command. Pitch relief is off, with stored authority 0; roll authority is 0.
Cockpit and flight control familiesAirbus A330Airbus Beluga XLTrim relief (aileron)0%
Dieselbe Entlastung für Rolltrimmung. Die meisten GA-Muster haben keine echte Querrudertrimmung, daher bleibt sie bei null; Muster mit Rolltrimmung bekommen einen passenden Wert.
Mehr: Rolltrimmung nimmt mehr gehaltene Rollkraft.
Weniger: Rolltrimmung bewirkt weniger.
Warum hier: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Effect gains · Ground
Runway rumble0%
Rollende Untergrundvibration aus Radgeschwindigkeit und Oberflächenart: die Textur von Asphalt, Gras oder Schotter unter dem Fahrwerk.
Mehr: lautere Oberflächentextur durch den Stick.
Weniger: ruhigeres Rollen.
Warum hier: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Gear bumps0%
Kurze einzelne Stöße von Dehnfugen, Spurrillen und rauem Belag: die Interpunktion über dem kontinuierlichen Rumpeln.
Mehr: schärfere Stöße von Fugen und Rillen.
Weniger: weichere Bodendetails.
Warum hier: Sets gear-bump texture during ground motion, separate from touchdown impact.
Effect gains · Airframe
Stall buffet6%
Zellenschütteln vor dem Überziehen und bei aktiver Überziehwarnung: wie laut diese Fläche ihr Unbehagen ankündigt. Muster mit sauberem Abriss bekommen moderates Schütteln, das Horn trägt die Warnung.
Mehr: lauteres Schütteln vor dem Überziehen.
Weniger: eine leisere Fläche; das Horn trägt die Warnung.
Warum hier: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Mach buffet6%
Transsonisches Schütteln nahe der Machgrenze. Relevant für Jets nahe MMO, null für Kolben und Turboprops, die nie dort ankommen.
Mehr: stärkeres transsonisches Schütteln nahe der Machgrenze.
Weniger: ruhigerer Flug bei hohem Mach.
Warum hier: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Flap buffet0%
Niederfrequente Zellenvibration mit Klappen im Fahrtwind, im Fenster, in dem sie wirklich Luft arbeiten.
Mehr: ein rauerer Lauf mit arbeitenden Klappen.
Weniger: ruhigere Anflugklappen.
Warum hier: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Gear buffet0%
Zellentrommeln vom ausgefahrenen Einziehfahrwerk im Fahrtwind. Null für Festfahrwerke, deren Zelle nie die Form ändert.
Mehr: mehr Trommeln mit hängendem Fahrwerk.
Weniger: saubererer Flug mit Fahrwerk.
Warum hier: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Stick shaker50%
Der dedizierte Stall-Stickshaker-Buzz, ausgelöst von der Überziehwarnanlage des Flugzeugs. Nur Muster mit echtem Shaker bekommen einen Wert; alle anderen verlassen sich auf Schütteln und Horn.
Mehr: ein härterer Shaker-Buzz.
Weniger: ein dezenterer Shaker.
Warum hier: Sets triggered shaker strength; inactive while the shaker feature is disabled.
Effect gains · Engine, mechanical & drag
Touchdown thump0%
Der Einmalstoß beim Aufsetzen, skaliert mit der Sinkrate: ein Butterlander flüstert, ein fester Aufsetzer wummst.
Mehr: ein härterer Tritt beim Aufsetzen.
Weniger: weichere Ankünfte.
Warum hier: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Reverse rumble0%
Ausrollvibration bei Schubumkehr oder Beta-Verstellung. Null für Muster ohne Umkehr.
Mehr: ein rauerer Ausrollvorgang unter Umkehrschub.
Weniger: leisere Umkehr.
Warum hier: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine rumble0%
Kontinuierliche Triebwerksvibration, die der Drehzahl von Leerlauf bis Volllast folgt: die allgegenwärtige Erinnerung, dass vorn etwas Kraftstoff verbrennt.
Mehr: mehr Triebwerk im Stick.
Weniger: ein leiseres Triebwerk.
Warum hier: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Flap motion0%
Dauervibration nur, solange der Simulator tatsächlich fahrende Klappenflächen meldet. Folgt echter Aktuatorbewegung und Ausfällen, keinem geschätzten Timer.
Mehr: mehr Vibration bei fahrenden Klappen.
Weniger: leisere Klappenläufe.
Warum hier: Sets texture from observed flap movement; a command without movement does not establish the cue.
Autopilot follow
AP follow authority5%
Wie weit Autopilotbefehle den physischen Stick bewegen dürfen. In MSFS winzig gehalten, weil eine bewegte Achse als Pilotene ingabe zurückgelesen werden kann; null schaltet das Folgen ab.
Mehr: der Autopilot bewegt deinen Stick sichtbar weiter.
Weniger: ein kaum wahrnehmbares Folgen.
Warum hier: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Spring response
SpringResponse · Travel enabledTrue
Whether this feature is active in this profile.
Warum hier: Applies the configured pitch and roll spring travel curves.
SpringResponse · Output1
Warum hier: Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel.
SpringResponse · Output0.3
Warum hier: Sets response at the second roll-curve point; its input position and other points determine the travel law.
Stick feel
StickFeel · Trim feel enabledFalse
Whether this feature is active in this profile.
Warum hier: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledFalse
Whether this feature is active in this profile.
Warum hier: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Force trim enabledFalse
Whether this feature is active in this profile.
Warum hier: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledFalse
Whether this feature is active in this profile.
Warum hier: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledFalse
Whether this feature is active in this profile.
Warum hier: Enables rate damping with the configured coefficients and control law.
Autopilot
Autopilot · Follow enabledFalse
Whether this feature is active in this profile.
Warum hier: Autopilot following is off; the configured spring and load retain the hardware feel. Separate neutral hold is on at strength 0.28, when a supported autopilot state admits it.
Autopilot · Neutral hold enabledTrue
Whether this feature is active in this profile.
Warum hier: Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.28
Warum hier: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero
Aero · EnabledTrue
Whether this feature is active in this profile.
Warum hier: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Max flap index4
Where this effect reaches full strength (or has fully faded, for washouts).
Mehr: a more gradual build to a later peak.
Weniger: a quicker build.
Warum hier: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index2
Where this effect begins fading in.
Mehr: the effect begins later.
Weniger: it begins earlier.
Warum hier: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Shaker enabledFalse
Whether this feature is active in this profile.
Warum hier: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Ground
Ground · EnabledFalse
Whether this feature is active in this profile.
Warum hier: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Engine
Engine · EnabledFalse
Whether this feature is active in this profile.
Warum hier: Enables engine cues with nonzero settings and valid running-engine telemetry.
Mechanical
Mechanical · EnabledTrue
Whether this feature is active in this profile.
Warum hier: Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0
The strength of this effect.
Mehr: a stronger effect.
Weniger: a weaker one.
Warum hier: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Alle Profileinstellungen
| Parameter | Wert | Was es steuert und warum |
|---|---|---|
| Spring strength | 0.55 | Fixed sidestick centering represents the Airbus control arrangement while keeping aircraft control-law behavior separate from hardware resistance. The baseline spring is 0.55. Low-speed spring blending is off. |
| Spring deadband | 0.01 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Forces · Center starting force | 0.03 | The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim. |
| Forces · Center starting force transition | 0.05 | Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual. |
| Force gain | 0.24 | The stored 0.24 aerodynamic-load gain is inactive under the fixed-centre control law. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | False | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.55 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 20 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 70 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Geschwindigkeit zur Kraftabstimmung | 250 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0 | Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase. |
| Airspeed stiffening cap | 2 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 0.65 | Roll and pitch aerodynamic scales are 0.65 and 0.86, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance. |
| Elevator force scale | 0.86 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| SpringResponse · Travel enabled | True | Applies the configured pitch and roll spring travel curves. |
| SpringResponse · Output | 1 | Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel. |
| SpringResponse · Output | 0.3 | Sets response at the second roll-curve point; its input position and other points determine the travel law. |
| StickFeel · Trim feel enabled | False | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | False | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0 | Aircraft automatic trim is independent of the selected passive stick centre; the trim-tank arrangement is not a hardware trim command. Pitch relief is off, with stored authority 0; roll authority is 0. |
| StickFeel · Aileron authority | 0 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| StickFeel · G load enabled | False | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | False | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. Separate neutral hold is on at strength 0.28, when a supported autopilot state admits it. |
| Autopilot · Follow authority | 0.05 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | True | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.28 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.06 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0.06 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 4 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | False | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | False | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Öffentliche Quellen 23
- Airbus A330Research background · Wikipedia revision 1373820047 · retrieved 2026-09-12
- Cockpit and flight control familiesAirbus cockpit family descriptions; Airbus cockpit commonality, sidestick philosophy; Airbus cockpit commonality
- Airbus A330Airbus A330 family
- Airbus Beluga XLAirbus A330 family
- v0.8.1 README.mdv0.8.1 commit09203ddc README
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- Airbus A330-300 POH
- X-Plane 12 Desktop Manual
- X-Plane aircraft and avionics manuals
- A330-900 change log
- A330 900Official developer / designated store catalogue · checked 2026-09-12
- Captain’s log: landing the first Airbus A330 in AntarcticaCarlos Mirpuri · 5 December 2025
- The flight test of Airbus’s refreshed widebody – the A330neoMike Gerzanics · 2019
- Umschulung auf den Airbus A330 – Upgrade für einen KapitänClaus Harder · 5 May 2023
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- Aerosoft Aircraft A330 neoProduct listing captured 28 September 2026; A330-900neo, MSFS 2024
- A330-300Product listing captured 2026-09-24; edition scope from the reviewed catalogue
- A339X A330-900neoProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- JARDesign 330 Airliner -JARDesign-A330Product listing captured 2026-09-30; edition scope from the reviewed catalogue
- Airbus A330-200 exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- Airbus A330-300 exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
- Airbus A330-900neo exact product reviewProduct listing captured 2026-09-24; edition scope from the reviewed catalogue
Community & Korrekturen
Wenn deine Erfahrung im Muster sagt, dass hier etwas falsch ist, korrigiere es hier.
Pilotenkorrekturen
Du fliegst dieses Muster? Korrigiere diese Seite.
Diese Seite basiert auf zitierten Quellen, und echte Erfahrung im Muster schlägt jedes Zitat. Zitiere die falsche Aussage und sag uns, was das echte Flugzeug tut. Korrekturen gehen zur Prüfung an den Maintainer und fließen in die nächste Fassung dieser Recherche ein.
Melde dich an, um eine Korrektur einzureichen. Kein Passwort, nur ein einmaliger E-Mail-Link.
Anmelden
Hangargespräche
Offene Unterhaltung über das Fliegen und Tunen der Airbus A330 family, im Community-Forum. Korrekturen oben gehen privat an den Maintainer; Hangargespräche sind öffentlich.
Melde dich an, um sie zu starten. Kein Passwort, nur ein einmaliger E-Mail-Link.
Anmelden
Community
Community-Profile für dieses Luftfahrzeug
Noch keine Community-Profile für dieses Luftfahrzeug.
Nach deinem Geschmack getunt? Teile ein Profil und es erscheint hier.