Julian Herzog (Website) · CC BY 4.0 · Airbus A320 in Lufthansa colours.The original A320 first flew in 1987 and entered service in 1988. Airbus subsequently stretched the design into the A321 and shortened it into the A319 and A318. The family made digital fly-by-wire and sidestick controls familiar to a large part of the airline world.
The A319, A321 and A320neo differ in fuselage length, engines, fuel arrangements and equipment. In the simulator, the original bundled A320neo, the later V2 aircraft and independent developers' products also have their own systems and documentation.
Airbus A320neo
Mehr über dieses Flugzeug auf AirframeDB
The A320 brought side-stick controllers and a two-person glass flight deck into the Airbus single-aisle family. Its low wing carries two turbofan engines, while the airframe combines conventional construction with composite structures in selected areas. The family label spans several fuselage lengths and engine generations; cockpit resemblance alone does not identify an A319, A320 or A321, or establish what a particular simulator package includes.
First flight: 22 February 1987 ( 1987-02-22 )
Direct sidestick position, rudder animation including trim, trim-actuator feedback and hydraulic circuit pressure are distinct signals.
Several familiar AUTOPILOT_ACTIVE and FMA variables are now listed as deprecated; a historical binding list is insufficient for current mappings.
The developer warns that generic PFD values bypass the add-on sensor model. Some autopilot selections are exceptions using standard datarefs.
Direct-law transition logic now uses actual gear-not-uplocked state rather than lever position; cockpit-output datarefs also changed.
Botley had flown easyJet liveries in Microsoft Flight Simulator as a child. In March 2019, during the week of his twenty-fifth birthday, he finally joined the airline's base training in a real Airbus. His first planned turn was postponed when the aircraft had to leave before everyone completed their circuits. Four days later, at Châteauroux, he waited through his classmates' turns before climbing into the right seat himself.
The aircraft seemed much bigger outside than the simulator had conveyed. At the controls, nerves gave way to the familiar procedures of his type rating, followed by the physical sensation of the engines accelerating the aircraft. He completed six circuits and then flew part of the return to Stansted. The captain and safety pilot took over for the arrival because of the wind limits. No passengers were aboard the flight.
Writing as PWJ flying, the author closes his training blog after passing his British Airways line check. The final months had brought company induction, safety training, more simulator work and circuits in an empty A320 under the supervision of experienced training captains. He then moved into passenger flying around Europe, initially with a safety pilot as well as a training captain. His first line-training flight went to Venice.
He remembers that first working day as a rush of activity, despite all the preparation. There was a great deal to absorb, but he enjoyed the challenge and gradually felt at home in the right seat. Between tasks on longer sectors, the view of the Alps, Spain and the French coast offered occasional rewards. After release from training, his first regular assignment took him to Larnaca. He describes formal training ending while a pilot's development continues throughout a career.
Hoteit tells Rosalind Azouzi how a challenge at university led her to apply for airline pilot training, changing a future she had imagined in mathematics. Her career included A320 charter work from Cuba, Venezuela and the Greek islands before command training on the A320/A321. She remembers her first flight as captain, from Beirut to Amman on 16 March 2011, as her proudest career milestone.
In the interview, she connects airline flying with the ability to solve unfamiliar problems and work effectively with a different crew on each trip. Acceptance had taken time in a profession where she encountered resistance as a woman, but encouragement from colleagues and passengers mattered to her. Family support helped her combine flying, motherhood and further university study. She hoped her progress would encourage more women to enter the cockpit. This is a career account from an A320/A321 captain, rather than a handling review.
The original A320 first flew in 1987 and entered service in 1988. Airbus subsequently stretched the design into the A321 and shortened it into the A319 and A318. The family made digital fly-by-wire and sidestick controls familiar to a large part of the airline world.
This starting point selects Airbus A319. Its aircraft-level settings do not select a particular developer’s custom systems.
The spring stays independent of airspeed. Directed aerodynamic loading is omitted.
Pitch-trim relief is off. Autopilot following is off.
Airbus's cockpit description establishes sidesticks and digital fly-by-wire across this family. FlyByWire's A32NX documentation describes passive spring centering, separate sidestick priority and no autopilot backdrive. That A32NX account is mechanism context for the family, rather than an interface specification for Fenix, ToLiss or another add-on. Aircraft autotrim and control-law changes act on aircraft response without creating a new aerodynamic load at a passive stick.
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
Die letzte Gesamtskalierung über alles, was das Modell erzeugt, vor der Gerätegrenze.
Mehr: alles (Feder, Lasten, Effekte) wird gemeinsam stärker.
Weniger: alles wird gemeinsam weicher.
Warum hier: Scales overall profile strength while preserving effect balance, subject to device and output limits.
Die Grundzentrierkraft, die den Stick zur Mitte zieht. Jede andere Kraft baut darauf auf. Zu niedrig fühlt sich der Stick im Normalflug schlaff an; zu hoch kämpft er gegen deine Hand und überdeckt die feineren Signale.
Mehr: festere Zentrierung, die der Hand jederzeit mehr widersteht.
Weniger: ein schlafferer Stick, der sich allein auf die aerodynamische Last stützt.
Warum hier: Fixed centering represents the passive Airbus sidestick. Pitch and roll spring-travel curves may differ without adding direct surface-force feedback. The baseline spring is 0.55. Low-speed spring blending is off.
Cockpit and flight control familiesSidestick controlsEine kleine neutrale Zone um die Mitte, in der die Feder ruhig bleibt, damit kleinste Bewegungen im Stand nicht flattern. Breiter ist ruhiger, aber lockerer; enger ist präziser, kann aber um die Mitte zittern.
Mehr: eine ruhigere, aber lockerere Mitte mit mehr Spiel.
Weniger: eine straffere Mitte, die in Ruhe zittern kann.
Warum hier: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Warum hier: The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim.
Warum hier: Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual.
Ein Gesamtmaß über beide anhaltenden Achslasten, vor ihrer Einzelbalance angewendet. Profile lassen es normalerweise stehen und stimmen die beiden Achslasten ab.
Mehr: beide Achsen laden härter auf.
Weniger: beide Achsen werden gemeinsam leichter.
Warum hier: The stored 0.04 aerodynamic-load gain is inactive under the fixed-centre control law.
Aktiviert das Niedrigfahrt-Einblendfenster der Feder (Beginn/Voll in Knoten oben). Aus bleibt die Feder bei jeder Fahrt konstant.
Warum hier: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Wie viel Feder im Stillstand übrig bleibt, bevor Fahrt überhaupt aerodynamische Kraft aufbauen kann. Ein hoher Sockel hält den geparkten Stick straff; ein niedriger ergibt das lose Seilzuggefühl eines geparkten Leichtflugzeugs.
Mehr: ein festerer Stick beim Parken und Rollen.
Weniger: ein schlaffer geparkter Stick, der erst mit Fahrt aufwacht.
Warum hier: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Die Fahrt, ab der die Feder vom Niedrigfahrt-Sockel Richtung volle Stärke steigt: der Beginn des "Lebendigwerdens" der Ruder im Startlauf.
Warum hier: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Die Fahrt, bei der die Feder volle Stärke erreicht. Zwischen Beginn und diesem Punkt strafft sich die Zentrierung zunehmend mit der Anströmung.
Warum hier: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Die angezeigte Fahrt, bei der die aerodynamische Last ihr ausgelegtes Vollniveau erreicht. Sie verankert die gesamte Lastkurve am realen Geschwindigkeitsbereich: eine 172 lädt bis 110 Knoten auf, ein Jet viel später.
Mehr: Lasten kommen später; der Stick bleibt bis zu höherer Fahrt leicht.
Weniger: Lasten kommen früher, und die Reise fühlt sich schwerer an.
Warum hier: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Wie stark sich die Zentrierung selbst mit der Fahrt strafft, zusätzlich zu den Ausschlaglasten. Null hält das Mittengefühl konstant; mehr lässt den Stick im Reiseflug härter und im Anflug lockerer zentrieren.
Mehr: eine Mitte, die mit Fahrt spürbar härter wird.
Weniger: konstantes Mittengefühl bei jeder Fahrt.
Warum hier: Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase.
Die Obergrenze der fahrtabhängigen Mittenstraffung, damit sehr hohe Fahrt die Feder nicht grenzenlos aufzieht.
Mehr: mehr Gesamtstraffung bei hoher Fahrt erlaubt.
Weniger: die Straffung klemmt früher ab.
Warum hier: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Die anhaltende Rolllast aus Querruderausschlag und Fahrt, unabhängig vom Nick balanciert. Zusammen mit der Höhenruderlast bestimmt sie die Ruderharmonie, von der Testberichte sprechen.
Mehr: schwerere Rollkräfte.
Weniger: leichtere, quirligere Querruder.
Warum hier: Roll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance.
Die anhaltende Nicklast aus Höhenruderausschlag und Fahrt, unabhängig von der Rollachse balanciert. Der Haupthebel für das Nickgewicht eines Musters. Er verändert weder Querruder, Feder, Trimmung noch Schüttelkräfte.
Mehr: schwerere anhaltende Nickkräfte bei Fahrt.
Weniger: ein leichteres Höhenruder, das weniger Muskel braucht.
Warum hier: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Eine Kappe je stetiger Nick- oder Rollkraft vor dem Gerät. Der Schutz davor, die Hardware in harten Manövern zu überfahren oder zu sättigen.
Mehr: stärkere Spitzenkräfte vor dem Abschneiden.
Weniger: eine sanftere Decke; harte Manöver flachen früher ab.
Warum hier: Caps directed-force output. Native spring effects and device limits remain separate.
Wie stark Höhenrudertrimmung die gehaltene Nickkraft abbaut und den Ruhepunkt des Sticks verschiebt. Bei 100 % braucht ein sauber getrimmtes Flugzeug keinen gehaltenen Druck: das Wegtrimmen der Last wie im echten Fliegen.
Mehr: Trimmung nimmt mehr der gehaltenen Nickkraft; bei 100 % nullt volle Trimmung sie.
Weniger: du hältst auch getrimmt weiter Kraft.
Warum hier: Automatic aircraft trim is separate from the passive sidestick centre, so disabled hardware trim relief preserves the selected fixed-centre approximation. Pitch relief is off, with stored authority 0; roll authority is 0.
Cockpit and flight control familiesSidestick controlsDieselbe Entlastung für Rolltrimmung. Die meisten GA-Muster haben keine echte Querrudertrimmung, daher bleibt sie bei null; Muster mit Rolltrimmung bekommen einen passenden Wert.
Mehr: Rolltrimmung nimmt mehr gehaltene Rollkraft.
Weniger: Rolltrimmung bewirkt weniger.
Warum hier: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Rollende Untergrundvibration aus Radgeschwindigkeit und Oberflächenart: die Textur von Asphalt, Gras oder Schotter unter dem Fahrwerk.
Mehr: lautere Oberflächentextur durch den Stick.
Weniger: ruhigeres Rollen.
Warum hier: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Kurze einzelne Stöße von Dehnfugen, Spurrillen und rauem Belag: die Interpunktion über dem kontinuierlichen Rumpeln.
Mehr: schärfere Stöße von Fugen und Rillen.
Weniger: weichere Bodendetails.
Warum hier: Sets gear-bump texture during ground motion, separate from touchdown impact.
Zellenschütteln vor dem Überziehen und bei aktiver Überziehwarnung: wie laut diese Fläche ihr Unbehagen ankündigt. Muster mit sauberem Abriss bekommen moderates Schütteln, das Horn trägt die Warnung.
Mehr: lauteres Schütteln vor dem Überziehen.
Weniger: eine leisere Fläche; das Horn trägt die Warnung.
Warum hier: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Transsonisches Schütteln nahe der Machgrenze. Relevant für Jets nahe MMO, null für Kolben und Turboprops, die nie dort ankommen.
Mehr: stärkeres transsonisches Schütteln nahe der Machgrenze.
Weniger: ruhigerer Flug bei hohem Mach.
Warum hier: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Niederfrequente Zellenvibration mit Klappen im Fahrtwind, im Fenster, in dem sie wirklich Luft arbeiten.
Mehr: ein rauerer Lauf mit arbeitenden Klappen.
Weniger: ruhigere Anflugklappen.
Warum hier: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Zellentrommeln vom ausgefahrenen Einziehfahrwerk im Fahrtwind. Null für Festfahrwerke, deren Zelle nie die Form ändert.
Mehr: mehr Trommeln mit hängendem Fahrwerk.
Weniger: saubererer Flug mit Fahrwerk.
Warum hier: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Der dedizierte Stall-Stickshaker-Buzz, ausgelöst von der Überziehwarnanlage des Flugzeugs. Nur Muster mit echtem Shaker bekommen einen Wert; alle anderen verlassen sich auf Schütteln und Horn.
Mehr: ein härterer Shaker-Buzz.
Weniger: ein dezenterer Shaker.
Warum hier: Sets triggered shaker strength; inactive while the shaker feature is disabled.
Der Einmalstoß beim Aufsetzen, skaliert mit der Sinkrate: ein Butterlander flüstert, ein fester Aufsetzer wummst.
Mehr: ein härterer Tritt beim Aufsetzen.
Weniger: weichere Ankünfte.
Warum hier: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Ausrollvibration bei Schubumkehr oder Beta-Verstellung. Null für Muster ohne Umkehr.
Mehr: ein rauerer Ausrollvorgang unter Umkehrschub.
Weniger: leisere Umkehr.
Warum hier: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Kontinuierliche Triebwerksvibration, die der Drehzahl von Leerlauf bis Volllast folgt: die allgegenwärtige Erinnerung, dass vorn etwas Kraftstoff verbrennt.
Mehr: mehr Triebwerk im Stick.
Weniger: ein leiseres Triebwerk.
Warum hier: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Dauervibration nur, solange der Simulator tatsächlich fahrende Klappenflächen meldet. Folgt echter Aktuatorbewegung und Ausfällen, keinem geschätzten Timer.
Mehr: mehr Vibration bei fahrenden Klappen.
Weniger: leisere Klappenläufe.
Warum hier: Sets texture from observed flap movement; a command without movement does not establish the cue.
Wie weit Autopilotbefehle den physischen Stick bewegen dürfen. In MSFS winzig gehalten, weil eine bewegte Achse als Pilotene ingabe zurückgelesen werden kann; null schaltet das Folgen ab.
Mehr: der Autopilot bewegt deinen Stick sichtbar weiter.
Weniger: ein kaum wahrnehmbares Folgen.
Warum hier: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Whether this feature is active in this profile.
Warum hier: Applies the configured pitch and roll spring travel curves.
Warum hier: Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel.
Warum hier: Sets response at the second roll-curve point; its input position and other points determine the travel law.
Whether this feature is active in this profile.
Warum hier: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
Whether this feature is active in this profile.
Warum hier: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
Whether this feature is active in this profile.
Warum hier: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
Whether this feature is active in this profile.
Warum hier: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
Whether this feature is active in this profile.
Warum hier: Enables rate damping with the configured coefficients and control law.
Whether this feature is active in this profile.
Warum hier: Autopilot following is off; the configured spring and load retain the hardware feel. Separate neutral hold is on at strength 0.28, when a supported autopilot state admits it.
Whether this feature is active in this profile.
Warum hier: Permits centering hold during a supported AP state, separate from following a moving target.
Warum hier: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Whether this feature is active in this profile.
Warum hier: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Where this effect reaches full strength (or has fully faded, for washouts).
Mehr: a more gradual build to a later peak.
Weniger: a quicker build.
Warum hier: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Where this effect begins fading in.
Mehr: the effect begins later.
Weniger: it begins earlier.
Warum hier: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Whether this feature is active in this profile.
Warum hier: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Whether this feature is active in this profile.
Warum hier: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Whether this feature is active in this profile.
Warum hier: Enables engine cues with nonzero settings and valid running-engine telemetry.
Whether this feature is active in this profile.
Warum hier: Enables accessory cues with configured strengths and observed accessory movement.
The strength of this effect.
Mehr: a stronger effect.
Weniger: a weaker one.
Warum hier: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
| Parameter | Wert | Was es steuert und warum |
|---|---|---|
| Spring strength | 0.55 | Fixed centering represents the passive Airbus sidestick. Pitch and roll spring-travel curves may differ without adding direct surface-force feedback. The baseline spring is 0.55. Low-speed spring blending is off. |
| Spring deadband | 0.01 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Forces · Center starting force | 0.03 | The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim. |
| Forces · Center starting force transition | 0.05 | Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual. |
| Force gain | 0.04 | The stored 0.04 aerodynamic-load gain is inactive under the fixed-centre control law. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | False | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.5 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 20 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 90 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Geschwindigkeit zur Kraftabstimmung | 260.0 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0 | Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 1 | Roll and pitch aerodynamic scales are 1 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance. |
| Elevator force scale | 1 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| SpringResponse · Travel enabled | True | Applies the configured pitch and roll spring travel curves. |
| SpringResponse · Output | 1 | Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel. |
| SpringResponse · Output | 0.3 | Sets response at the second roll-curve point; its input position and other points determine the travel law. |
| StickFeel · Trim feel enabled | False | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | False | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0 | Automatic aircraft trim is separate from the passive sidestick centre, so disabled hardware trim relief preserves the selected fixed-centre approximation. Pitch relief is off, with stored authority 0; roll authority is 0. |
| StickFeel · Aileron authority | 0 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| StickFeel · G load enabled | False | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | False | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. Separate neutral hold is on at strength 0.28, when a supported autopilot state admits it. |
| Autopilot · Follow authority | 0.05 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | True | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.28 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.06 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0.06 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 4 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | False | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | False | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Wenn deine Erfahrung im Muster sagt, dass hier etwas falsch ist, korrigiere es hier.
Diese Seite basiert auf zitierten Quellen, und echte Erfahrung im Muster schlägt jedes Zitat. Zitiere die falsche Aussage und sag uns, was das echte Flugzeug tut. Korrekturen gehen zur Prüfung an den Maintainer und fließen in die nächste Fassung dieser Recherche ein.
Offene Unterhaltung über das Fliegen und Tunen der Airbus A320 family, im Community-Forum. Korrekturen oben gehen privat an den Maintainer; Hangargespräche sind öffentlich.