A prototype travels with its working team
Bourke’s visit finds the H160 programme far from its home base, with engineers, test equipment and a tightly scheduled exhibition appearance.
機体ライブラリAirbus H160
Berg2 · CC BY-SA 3.0 · Airbus Helicopters H160 picturedAirbus H160
A modern medium twin-engine helicopter developed as a successor to the Dauphin line.
Helicopterプロファイル候補：2
機体を知る
Airbus launched the H160 programme publicly in 2015, with the first flight that year. The design combines a composite-intensive airframe with distinctive swept main-rotor tips and an enclosed tail rotor. Its roles include passenger transport and public-service work.
HPG's simulator implementation places particular emphasis on its automatic flight-control system. Its four-axis AFCS and backup stability functions manage flight control; the developer manual describes their modes.
Airbus Helicopters H160 · Specifications (H160) · real aircraft; source units retained
- Length
- 13.96 m (45 ft 10 in)↗
- Height
- 4.91 m (16 ft 1 in)↗
- Empty weight
- 4,050 kg (8,929 lb)↗
- Max takeoff weight
- 6,050 kg (13,338 lb)↗
- Powerplant
- 2 × Safran Arrano 1A turboshaft engines, 955 kW (1,280 shp) each↗
- Main rotor diameter
- 13.40 m (43.96 ft)↗
- Main rotor area
- 141 m² (1,520 sq ft)↗
- Cruise speed
- 255 km/h (158 mph, 138 kn)↗
- Range
- 880 km (550 mi, 475 nmi)↗
- Service ceiling
- 6,096 m (20,000 ft) , 9,300 ft (2,835 m) hover ceiling IGE↗
Passenger experience was part of the development brief
Gensse describes windows, noise, vibration and cabin temperature as deliberate priorities alongside cockpit workload. His interview adds the test team’s explanation of the H160’s design choices, while remaining a manufacturer’s account of its own programme.
Development milestones
First flight: 13 June 2015
Snow nearly cancels a Las Vegas demonstration
A winter snow shower was an unexpected obstacle to Bourke’s Las Vegas flight. The camera helicopter was stranded at another airport, and the H160 had to enter the exhibition hall the following morning. While waiting, he talked with the engineers and test crew working from a modest rented hangar. A break in the weather finally made the flight possible.
The changing light sent the two helicopters searching for suitable photographic backgrounds around the mountains. Gensse flew the close formation while Bourke handled radios and lookout. Later, Bourke tried the controls himself, landing at a ridge site and exploring the aircraft before returning for supervised circuit work. Visibility and responsive handling made the helicopter feel smaller than its size suggested. The day combined a demanding promotional schedule with a memorable opportunity to learn from its test pilot.
The test pilot wants complexity to do useful work
Having worked on the H160 from its beginnings, Gensse admitted that his enthusiasm was personal. Customer demonstrations gave him a particular reward: watching experienced pilots and passengers react after a flight. He saw those reactions as an encouraging response to years spent developing the aircraft.
His account repeatedly returns to the pilot’s attention. More equipment would have little value, he argued, if it merely created more buttons and monitoring work. The cockpit needed to present relevant information and make the automation useful enough that pilots would actually choose it. Passenger comfort also shaped the work, from windows to cabin temperature. He expressed pride in the result and acknowledged his attachment to the programme.
Experiencing the cabin before taking the controls
Mabille began his H160 introduction in the passenger cabin. Wide windows and a quiet environment made an immediate impression, even with the prototype’s test equipment and temporary interior. After watching demonstrations in flight, he landed with the crew at Berre La Fare and moved into the cockpit for his own evaluation.
His naval flying background made visibility during hoisting work a particular interest. He explored the view from a hover and tried supervised handling and simulated emergencies, then let Gensse demonstrate more demanding manoeuvres. On the return to Marignane, the approach and electric brakes supplied further impressions. Afterward, Mabille realised how much time he had spent looking outside instead of being drawn into the displays. The account describes a prototype demonstration, including equipment and expectations that still belonged to the development programme.
公開資料 9
- Airbus Helicopters H160Research background · Wikipedia revision 1374236182 · retrieved 2026-09-12
- H160 quick-start
- Microsoft Flight Simulator aircraft manuals
- HPG products
- H160Official developer / designated store catalogue · checked 2026-09-12Product listing captured 2026-09-30; edition scope from the reviewed catalogue
- Inside the H160, middleweight contenderJon Bourke · 26 April 2018
- A conversation with experimental test pilot Olivier GensseOlivier Gensse · 17 April 2019
- H160 flight test: a generation aheadOlivier Mabille · 11 October 2018
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
プロファイルによるモデル化
HPG H160
Free + ProMSFS 2020MSFS 2024Hype Performance Group
Airbus launched the H160 programme publicly in 2015, with the first flight that year. The design combines a composite-intensive airframe with distinctive swept main-rotor tips and an enclosed tail rotor. Its roles include passenger transport and public-service work.
This profile selects HPG H160 for MSFS 2020, MSFS 2024.
The spring stays independent of airspeed. Directed aerodynamic loading is omitted.
Local force trim is off. Autopilot following is off.
Cyclic damping is on. Its configured gain is 0.35; it resists hardware motion separately from the spring and aircraft stabilization.
Controls and trim
HPG's H160 guide connects automatic trim with dual autopilots and backup stabilization. Rotor trim reset pauses AFCS logic for manual cyclic input, and beep trim depends on the active context. FADEC manages the engine throttles. EASA type data separately describes retractable hydraulic tricycle gear. None of these systems is reduced to a single moving hardware-spring centre.
The selected implementation
HPG separates civil/luxury fits and luxury emergency floats. Its documented 2024 activation path applies to the earlier product and its own AFCS/trim-reset logic.
About the values
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
Master gain & control system
Master gain65%
モデルが生み出すすべてに適用される最終的な全体出力スケール。デバイス上限の前に適用されます。
上げると: すべて(バネ、荷重、効果)が一緒に強まります。
下げると: すべてが一緒に和らぎます。
この値の理由: Scales overall profile strength while preserving effect balance, subject to device and output limits.
Forces
Spring strength16%
スティックを中央へ引き戻す基本のセンタリング力。他のすべての力はこの上に積み重なります。低すぎると通常飛行でスティックが頼りなく、高すぎると手に逆らい、上に重なる細かな手がかりを覆い隠します。
上げると: 手により強く抵抗する、固いセンタリング。
下げると: 空力荷重だけに頼る、柔らかいスティック。
この値の理由: Nominal cyclic spring and damping provide the chosen baseline while the add-on manages AFCS and automatic trim. The baseline spring is 0.16. Low-speed spring blending is off.
H160 quick-startExact product and documentation researchwww.hypeperformancegroup.comEASA H160 type certificate rotor referencesSpring deadband2%
中央付近でバネが沈黙する小さなニュートラルゾーン。静止時の微小な動きがガタつかないようにします。広いほど落ち着きますが緩くなり、狭いほど精密ですが中央で震えることがあります。
上げると: より静かだが緩い、遊びの多い中央。
下げると: 静止時に震えうる、締まった中央。
この値の理由: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Overall aerodynamic load0%
両軸の持続荷重にかかるマスタースケールで、各軸の独立バランスの前に適用されます。プロファイルは通常これに触れず、二つの軸荷重を調整します。
上げると: 両軸がより強く荷重します。
下げると: 両軸が一緒に軽くなります。
この値の理由: The 0 gain omits sustained directed airspeed loading. Spring resistance remains independent.
Airspeed blendingFalse
低速のバネ立ち上げ窓(上記の開始/全強度ノット)を有効にします。オフではバネは全速度で一定です。
この値の理由: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Low-speed spring floor100%
停止状態で、速度が空力を生む前にバネがどれだけ残るか。床が高いと駐機中のスティックはしっかりし、低いと駐機した軽飛行機のケーブルが緩んだような感触になります。
上げると: 駐機・タキシー時により固いスティック。
下げると: 速度でしか目覚めない、駐機時の柔らかいスティック。
この値の理由: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring engagement start8 kt
バネが低速の床から全強度へ立ち上がり始める速度。離陸滑走で操縦系統が「目を覚ます」ポイントです。
この値の理由: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring engagement full65 kt
バネが全強度に達する速度。開始点からここまでの間、舵面上の気流が増すにつれセンタリングは徐々に固まります。
この値の理由: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
フォース調整速度140
空力荷重が設計上の満量に達する指示対気速度。荷重カーブ全体を機体の実際の速度域に固定します。172は110ノットで荷重が乗り、ジェットはずっと後です。
上げると: 荷重の到来が遅くなり、より速くまでスティックが軽いまま。
下げると: 荷重が早く到来し、巡航がより重く。
この値の理由: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Centre firmness vs speed0%
舵角荷重に加えて、センタリング自体が速度でどれだけ固くなるか。ゼロなら中央の感触は一定、大きくすると巡航で固く、場周で緩くなります。
上げると: 速度とともに明確に固くなる中央。
下げると: どの速度でも一定の中央感覚。
この値の理由: Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase.
Centre stiffening cap5
速度によるセンター硬化の上限。超高速飛行でバネが際限なく巻き上がるのを防ぎます。
上げると: 高速でより多くの総硬化を許容。
下げると: 硬化がより早く頭打ちに。
この値の理由: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron load72%
エルロン舵角と速度による持続的なロール荷重で、ピッチとは独立に調整されます。エレベーター荷重と合わせて、レビューで語られる操縦調和の比率を決めます。
上げると: より重いロール力。
下げると: より軽く機敏なエルロン。
この値の理由: Roll and pitch aerodynamic scales are 0.72 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled.
Elevator load100%
エレベーター舵角と速度による持続的なピッチ荷重で、ロールとは独立に調整されます。機種ごとのピッチの重さを決める主レバーです。エルロン、バネ、トリム、バフェットの力には触れません。
上げると: 速度での持続ピッチ力がより重く。
下げると: 保持する力の軽い、より軽やかなエレベーター。
この値の理由: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Max output force55%
各定常ピッチ・ロール力がデバイスへ届く前の上限。強い機動でハードウェアを叩いたり飽和させたりしないための保護です。
上げると: クリップ前の定常力ピークがより高く。
下げると: より柔らかい天井。激しい機動が早く平らに。
この値の理由: Caps directed-force output. Native spring effects and device limits remain separate.
Trim
Trim relief (elevator)0%
エレベータートリムが保持ピッチ力をどれだけ和らげ、スティックの落ち着き位置をずらすか。100 %では正しくトリムされた機体は保持圧が不要になり、実機の「荷重をトリムで消す」手順そのものです。
上げると: トリムがより多くの保持力を除去。100 %ではフルトリムで打ち消し。
下げると: トリムしても力を保持し続けます。
この値の理由: Scales supported pitch-trim relief and permitted centre movement. Zero removes pitch response.
Trim relief (aileron)0%
ロールトリムの同じ軽減。多くのGA機には本物のエルロントリムがないためゼロのまま。ロールトリムを持つ機種には相応の値が入ります。
上げると: ロールトリムがより多くの保持力を除去。
下げると: ロールトリムの効きが弱く。
この値の理由: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Effect gains · Ground
Runway rumble15%
車輪速度と路面種別(舗装、草、砂利)による転がりの振動。
上げると: スティックの路面テクスチャがより強く。
下げると: より滑らかなタキシー。
この値の理由: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Gear bumps0%
伸縮継ぎ目や轍、荒れた路面からの短い個別の衝撃で、連続的なゴロゴロに句読点を打ちます。
上げると: 継ぎ目と轍の衝撃がより鋭く。
下げると: より柔らかな地面のディテール。
この値の理由: Sets gear-bump texture during ground motion, separate from touchdown impact.
Effect gains · Airframe
Stall buffet0%
失速接近時と失速警報作動中の機体の震え。この翼が不満をどれだけ大声で告げるかです。切れ味よく落ちる機種は控えめなバフェットになり、警報音に警告を任せます。
上げると: より強い失速前の震え。
下げると: より控えめな翼。警報音が警告を担います。
この値の理由: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Mach buffet0%
マッハ限界接近時の遷音速バフェット。MMO付近のジェットには意味があり、そこへ到達しないレシプロやターボプロップではゼロです。
上げると: マッハ限界近くのより強い遷音速バフェット。
下げると: 高マッハでより滑らかな飛行。
この値の理由: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Flap buffet0%
フラップが実際に空気を掴む速度窓で、気流に展開されたフラップによる機体の低周波振動。
上げると: フラップ作動中のより荒い飛行。
下げると: より柔らかな進入フラップ。
この値の理由: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Gear buffet0%
気流中に垂れた引込脚による機体のドラミング。機体形状が変わらない固定脚の機種ではゼロです。
上げると: 脚下げ時のドラミングが増加。
下げると: 脚下げ飛行がより綺麗に。
この値の理由: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Stick shaker50%
機体自身の失速警報システムが発火させる専用のスティックシェーカーの振動。本物のシェーカーを持つ機種だけに値が入り、他はすべて空力バフェットと警報音に頼ります。
上げると: より固いシェーカー。
下げると: より控えめなシェーカー。
この値の理由: Sets triggered shaker strength; inactive while the shaker feature is disabled.
Effect gains · Engine, mechanical & drag
Touchdown thump50%
車輪が滑走路に触れる瞬間の単発のキック。沈下率でスケールされ、グリーサーはささやき、固い接地はドンと響きます。
上げると: 接地のより固い衝撃。
下げると: より柔らかな到着。
この値の理由: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Reverse rumble0%
逆推力やベータ域のプロペラが働いている間の滑走振動。リバースのない機種ではゼロです。
上げると: リバース中のより荒い滑走。
下げると: より控えめなリバース。
この値の理由: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine rumble0%
アイドルから全出力まで回転数に従う連続的な動力装置の振動。前方で何かが燃料を燃やしている、常に存在する注意喚起です。
上げると: スティックのエンジンが増加。
下げると: より控えめなエンジン。
この値の理由: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Flap motion0%
シミュレーターがフラップ舵面の実際の移動を報告している間だけの連続振動。推定タイマーではなく、実際のアクチュエーター動作と故障に従います。
上げると: フラップ移動中の振動が増加。
下げると: より控えめなフラップ走行。
この値の理由: Sets texture from observed flap movement; a command without movement does not establish the cue.
Autopilot follow
AP follow authority5%
オートパイロットの指令がスティックを物理的にどこまで動かせるか。動いた軸がパイロット入力として読み返されうるMSFSでは極小に保ちます。ゼロで追従は完全に無効です。
上げると: オートパイロットがスティックを目に見えて多く動かします。
下げると: ほぼ気づかない追従。
この値の理由: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Stick feel
StickFeel · Trim feel enabledFalse
Whether this feature is active in this profile.
この値の理由: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledFalse
Whether this feature is active in this profile.
この値の理由: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Force trim enabledFalse
Whether this feature is active in this profile.
この値の理由: Local force trim is a limited hardware-neutral function; it does not recreate AFCS pause, upper modes or backup stabilization. Local force trim is off. The stored latch parameters are inactive; the profile does not supply a local hold-where-left neutral.
H160 quick-startExact product and documentation researchwww.hypeperformancegroup.comEASA H160 type certificate rotor referencesStickFeel · G load enabledFalse
Whether this feature is active in this profile.
この値の理由: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledFalse
Whether this feature is active in this profile.
この値の理由: Enables rate damping with the configured coefficients and control law.
Autopilot
Autopilot · Follow enabledFalse
Whether this feature is active in this profile.
この値の理由: Autopilot following is off; the configured spring and load retain the hardware feel.
Autopilot · Neutral hold enabledFalse
Whether this feature is active in this profile.
この値の理由: Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.6
この値の理由: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero
Aero · EnabledTrue
Whether this feature is active in this profile.
この値の理由: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Max flap index1
Where this effect reaches full strength (or has fully faded, for washouts).
上げると: a more gradual build to a later peak.
下げると: a quicker build.
この値の理由: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index1
Where this effect begins fading in.
上げると: the effect begins later.
下げると: it begins earlier.
この値の理由: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Shaker enabledFalse
Whether this feature is active in this profile.
この値の理由: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Ground
Ground · EnabledTrue
Whether this feature is active in this profile.
この値の理由: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Engine
Engine · EnabledTrue
Whether this feature is active in this profile.
この値の理由: Enables engine cues with nonzero settings and valid running-engine telemetry.
Mechanical
Mechanical · EnabledTrue
Whether this feature is active in this profile.
この値の理由: Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0.025
The strength of this effect.
上げると: a stronger effect.
下げると: a weaker one.
この値の理由: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
すべてのプロファイル設定
| パラメーター | 値 | 何を制御するのかとその理由 |
|---|---|---|
| Spring strength | 0.16 | Nominal cyclic spring and damping provide the chosen baseline while the add-on manages AFCS and automatic trim. The baseline spring is 0.16. Low-speed spring blending is off. |
| Spring deadband | 0.02 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Force gain | 0 | The 0 gain omits sustained directed airspeed loading. Spring resistance remains independent. |
| Master gain | 0.65 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | False | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 1 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 8 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 65 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| フォース調整速度 | 140 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0 | Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 0.72 | Roll and pitch aerodynamic scales are 0.72 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. No custom spring-travel curve is enabled. |
| Elevator force scale | 1 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| StickFeel · Trim feel enabled | False | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | False | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0 | Scales supported pitch-trim relief and permitted centre movement. Zero removes pitch response. |
| StickFeel · Aileron authority | 0 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Local force trim is a limited hardware-neutral function; it does not recreate AFCS pause, upper modes or backup stabilization. Local force trim is off. The stored latch parameters are inactive; the profile does not supply a local hold-where-left neutral. |
| StickFeel · G load enabled | False | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | False | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot · Follow authority | 0.05 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | False | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.6 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 1 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 1 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | True | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0.15 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0.5 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | True | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0.025 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
公開資料 11
- Airbus Helicopters H160Research background · Wikipedia revision 1374236182 · retrieved 2026-09-12
- H160 quick-startHPG H160 quick start PDF pp.3/7
- Exact product and documentation researchH160 exact product and variantsOfficial developer / designated store catalogue · checked 2026-09-12Product listing captured 2026-09-30; edition scope from the reviewed catalogue
- www.hypeperformancegroup.comHPG installation and activation in2024; HPG2024 installation and activation
- EASA H160 type certificate rotor referencesAirbus H160
- Microsoft Flight Simulator aircraft manuals
- HPG products
- Inside the H160, middleweight contenderJon Bourke · 26 April 2018
- A conversation with experimental test pilot Olivier GensseOlivier Gensse · 17 April 2019
- H160 flight test: a generation aheadOlivier Mabille · 11 October 2018
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
コミュニティと訂正
実機経験からこのページに誤りがあると思ったら、ここで訂正してください。
パイロットによる訂正
この機体に乗っていますか?このページを訂正。
このページは引用文献に基づいていますが、実機での経験は引用に勝ります。 誤っている主張を引用し、実機が実際にどうかを教えてください。訂正は メンテナーが確認し、この調査の次の改訂に反映されます。
訂正の送信にはサインインしてください。パスワード不要、ワンタイムのメールリンクだけです。
サインイン
ハンガートーク
Airbus H160の操縦や調整についてのオープンな会話です(コミュニティフォーラム)。上の訂正はメンテナーに非公開で届きます。ハンガートークは公開です。
開始するにはサインインしてください。パスワード不要、ワンタイムのメールリンクだけです。
サインイン
コミュニティ
この機体のコミュニティプロファイル
この機体のコミュニティプロファイルはまだありません。
自分好みに調整しましたか? プロファイルを共有 するとここに表示されます。