Development milestones
First flight: February 19, 1965
Bibliothèque d'appareilsCessna 188 AGTruck
Dtom · CC BY-SA 3.0 · Cessna 188.Cessna 188 AGTruck
A low-wing agricultural Cessna with a cockpit and hopper arranged around the job.
Utility1 choix de profil
Connaître l'avion
The 188 family is quite different from the high-wing touring singles usually associated with Cessna. A low wing and working-load hopper serve its agricultural purpose, while the pilot sits high behind the engine and load area. Production ran from the 1960s into the early 1980s.
Agwagon, Agtruck and related names identify developments within the family. The simulated Agtruck represents this agricultural branch and its mission equipment.
Cessna 188 · Specifications (1976 AGtruck) · real aircraft; source units retained
- Length
- 26 ft 3 in (8.00 m)↗
- Wingspan
- 41 ft 8 in (12.70 m)↗
- Height
- 7 ft 8 + 1 ⁄ 2 in (2.350 m)↗
- Wing area
- 205 sq ft (19.0 m² )↗
- Empty weight
- 2,059 lb (934 kg) (with no dispersal equipment installed)↗
- Gross weight
- 3,300 lb (1,497 kg)↗
- Max takeoff weight
- 4,200 lb (1,905 kg)↗
- Powerplant
- 1 × Continental IO-520-D air-cooled flat-six , 300 hp (220 kW)↗
- Propellers
- 2-bladed McCauley metal constant-speed propeller↗
- Maximum speed
- 121 mph (195 km/h, 105 kn)↗
En savoir plus sur cet aéronef sur AirframeDB
A rushed departure turns a hot working day into a close call
Delanghe remembered a demanding day treating canola fields during an insect infestation. When the wind briefly dropped, tired pilots returned to work under pressure to help farmers whose crops were deteriorating. Reloading and departing quickly, he missed a flap setting and failed to appreciate how much hotter the afternoon had become.
A pickup turning onto the gravel departure road suddenly made the aircraft’s sluggish acceleration critical. He recalled clearing it by a small margin after correcting the flap setting, then returning from the spraying job shaken by the experience. Looking back, he connected the episode with fatigue, haste and inadequate attention to conditions.
Helping load an aircraft leads to a different working life
McClary grew up in a farming family and initially hoped to play professional baseball. After an injury redirected his plans, farming became his work, but helping a friend load Cessna 188s introduced another possibility. An interest in aviation developed into pilot certificates and long conversations about learning the agricultural business.
He began flying a Cessna 188 for Henry Haddock’s operation. The first year included difficult encounters with power lines, and the report describes him learning from those experiences and continuing with the company. Aircraft types and business arrangements changed over the following years, but the Cessna period remained the beginning of his ag-flying career. Later, he would mentor another newcomer as others had once helped him.
A pilot records what he could and could not explain
Christensen’s statement describes preparing for an agricultural departure after flying from the same field the previous day. He reviewed the work with the operator, checked the aircraft and began the takeoff with a load in the hopper. During the climb, he believed he would clear the obstacles ahead.
Near the end of the field, he recalled losing height before the aircraft struck a power line and came down. Spray mixture obscured the windshield, leaving him unable to describe the subsequent impact precisely. His written account distinguishes what he remembered from what he could only guess, including which part of the aircraft contacted the wire. It provides the pilot’s own account of the event, with those limits on his observations intact.
Sources publiques 7
- Cessna 188Research background · Wikipedia revision 1303288571 · retrieved 2026-09-12
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- The Devil is in the DetailsTed Delanghe · 3 September 2025
- Don’t Give Up, Get UpGraham Lavender interviews Guy McClary · 1 August 2024
- Pilot statement concerning N731MBTorben Than Christensen · statement dated 16 August 2015
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
Comment le profil le modélise
Cessna 188 AGTruck
Free + ProMSFS 2024
The 188 family is quite different from the high-wing touring singles usually associated with Cessna. A low wing and working-load hopper serve its agricultural purpose, while the pilot sits high behind the engine and load area. Production ran from the 1960s into the early 1980s.
This starting point selects Cessna 188 AGTruck. Its aircraft-level settings do not select a particular developer’s custom systems.
Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.
Valid trim provides the configured pressure relief. Autopilot following is off.
Controls and trim
The C188 AgTruck datasheet identifies the agricultural configuration and a three-blade constant-speed propeller. The low wing and working-load role distinguish it from Cessna's touring singles. Propeller and equipment context do not establish a calibrated control-force curve, so its stick-loading and vibration settings remain selected estimates.
About the values
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
Master gain & control system
Master gain85%
L'échelle globale finale appliquée à tout ce que produit le modèle, avant la limite du périphérique.
Plus : tout (ressort, charges, effets) se renforce ensemble.
Moins : tout s'adoucit ensemble.
Pourquoi ici : Scales overall profile strength while preserving effect balance, subject to device and output limits.
Forces
Spring strength74%
La force de rappel de base qui ramène le manche au neutre. Toutes les autres forces s'empilent dessus. Trop faible, le manche paraît mou en vol normal ; trop forte, elle lutte contre la main et masque les signaux plus fins.
Plus : un centrage plus ferme qui résiste davantage à la main.
Moins : un manche plus mou qui ne compte que sur la charge aérodynamique.
Pourquoi ici : The agricultural aircraft's nominal manual-control response is independent of the constant-speed propeller cue. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 50 KIAS.
Carenado C188 developer data sheet on SteamSpring deadband4%
Une petite zone neutre autour du centre où le ressort reste muet, pour que les micro-mouvements à l'arrêt ne vibrent pas. Plus large, c'est plus calme mais plus lâche ; plus étroite, plus précis mais parfois nerveux au neutre.
Plus : un centre plus calme mais plus lâche, avec plus de jeu.
Moins : un centre plus serré qui peut vibrer au repos.
Pourquoi ici : Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Overall aerodynamic load80%
Une échelle maîtresse sur les deux charges d'axe, appliquée avant leur équilibre individuel. Les profils la laissent en général en place et règlent les deux axes.
Plus : les deux axes chargent plus fort.
Moins : les deux axes s'allègent ensemble.
Pourquoi ici : The aerodynamic-load gain is 0.8 with an indicated-speed reference of 100 KIAS. This supplies speed-dependent loading alongside the spring.
Airspeed blendingTrue
Active la fenêtre d'engagement basse vitesse du ressort (début/plein en nœuds ci-dessus). Désactivé, le ressort est constant à toute vitesse.
Pourquoi ici : Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Low-speed spring floor50%
La part du ressort qui survit à l'arrêt, avant que la vitesse ne crée la moindre force aérodynamique. Un plancher haut garde le manche ferme au parking ; un plancher bas donne le jeu de câbles d'un avion léger au parking.
Plus : un manche plus ferme au parking et au roulage.
Moins : un manche mou au parking qui ne s'éveille qu'avec la vitesse.
Pourquoi ici : Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring engagement start14.0 kt
La vitesse à laquelle le ressort quitte son plancher basse vitesse vers la pleine raideur : le début du réveil des commandes au roulage de décollage.
Pourquoi ici : Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring engagement full50.0 kt
La vitesse où le ressort atteint sa pleine raideur. Entre le début et ce point, le centrage se raffermit avec le vent relatif.
Pourquoi ici : Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Vitesse de réglage des forces100
La vitesse indiquée où la charge aérodynamique atteint son niveau de conception. Elle ancre toute la courbe au domaine réel : un 172 charge dès 110 nœuds, un jet bien plus tard.
Plus : les charges arrivent plus tard ; le manche reste léger jusqu'à plus vite.
Moins : les charges arrivent plus tôt et la croisière pèse davantage.
Pourquoi ici : Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Centre firmness vs speed15%
Combien le centrage lui-même se raidit avec la vitesse, en plus des charges de braquage. Zéro garde un centre constant ; plus fait centrer dur en croisière et souple en tour de piste.
Plus : un centre qui durcit nettement avec la vitesse.
Moins : une sensation de centre constante à toute vitesse.
Pourquoi ici : The high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 50 KIAS, with the squared-speed ratio capped at 5.
Centre stiffening cap5
La limite haute du raidissement lié à la vitesse, pour que le vol très rapide ne remonte pas le ressort sans borne.
Plus : plus de raidissement total permis à haute vitesse.
Moins : le raidissement se bride plus tôt.
Pourquoi ici : Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron load72%
La charge de roulis soutenue issue du braquage d'ailerons et de la vitesse, équilibrée indépendamment du tangage. Avec la charge de profondeur, elle fixe l'harmonie des commandes dont parlent les essais.
Plus : des efforts de roulis plus lourds.
Moins : des ailerons plus légers, plus vifs.
Pourquoi ici : Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator load100%
La charge de tangage soutenue issue du braquage de profondeur et de la vitesse, équilibrée indépendamment du roulis. Le levier principal du poids en tangage d'un type. Il ne touche ni ailerons, ni ressort, ni trim, ni buffet.
Plus : des efforts de tangage soutenus plus lourds en vitesse.
Moins : une profondeur plus légère, moins musclée à tenir.
Pourquoi ici : Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Max output force55%
Un plafond par force stable de tangage ou roulis avant le périphérique : la garde contre le claquement ou la saturation du matériel en manœuvre forte.
Plus : des pics de force stable plus élevés avant écrêtage.
Moins : un plafond plus doux ; les manœuvres dures s'aplatissent plus tôt.
Pourquoi ici : Caps directed-force output. Native spring effects and device limits remain separate.
Trim
Trim relief (elevator)30%
Combien le trim de profondeur soulage l'effort tenu et déplace le point de repos du manche. À 100 %, un avion bien compensé ne demande aucune pression : le geste réel de compenser la charge.
Plus : le trim retire plus d'effort tenu ; à 100 %, plein trim l'annule.
Moins : vous continuez à tenir de l'effort même compensé.
Pourquoi ici : Pitch relief remains a selected response to valid trim input, with the acquired datasheet not quantifying its authority. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.
Carenado C188 developer data sheet on SteamTrim relief (aileron)0%
Le même soulagement pour le trim de roulis. La plupart des avions légers n'ont pas de vrai trim d'ailerons, donc zéro ; les types qui en ont reçoivent une valeur adaptée.
Plus : le trim de roulis retire plus d'effort tenu.
Moins : le trim de roulis fait moins.
Pourquoi ici : Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Effect gains · Ground
Runway rumble40%
Vibration de roulement issue de la vitesse des roues et du revêtement : la texture du bitume, de l'herbe ou du gravier sous le train.
Plus : une texture de surface plus forte dans le manche.
Moins : un roulage plus lisse.
Pourquoi ici : Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Gear bumps25%
Chocs courts et distincts des joints, ornières et surfaces rugueuses : la ponctuation au-dessus du grondement continu.
Plus : des chocs plus nets des joints et ornières.
Moins : des détails de sol plus doux.
Pourquoi ici : Sets gear-bump texture during ground motion, separate from touchdown impact.
Effect gains · Airframe
Stall buffet35%
Buffet de cellule à l'approche du décrochage et pendant l'avertisseur : la voix de cette aile quand elle est mécontente. Les types à décrochage franc reçoivent un buffet modéré, le klaxon porte l'alerte.
Plus : un tremblement pré-décrochage plus fort.
Moins : une aile plus discrète ; le klaxon porte l'alerte.
Pourquoi ici : Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Mach buffet0%
Buffet transsonique près de la limite de Mach. Parlant pour les jets près de MMO, zéro pour pistons et turbopropulseurs qui n'y vont jamais.
Plus : un buffet transsonique plus fort près de la limite de Mach.
Moins : un vol plus lisse à haut Mach.
Pourquoi ici : Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Flap buffet14%
Vibration basse fréquence de cellule avec les volets dans le vent, dans la fenêtre où ils travaillent vraiment l'air.
Plus : un vol plus rugueux volets au travail.
Moins : des volets d'approche plus doux.
Pourquoi ici : Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Gear buffet0%
Le tambourinement du train rentrant sorti dans le flux. Zéro pour les trains fixes, dont la cellule ne change jamais de forme.
Plus : plus de tambourinement train sorti.
Moins : un vol train sorti plus propre.
Pourquoi ici : Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Stick shaker50%
Le vibreur de manche dédié, déclenché par l'avertisseur de décrochage de l'avion. Seuls les types à vrai vibreur reçoivent une valeur ; les autres comptent sur buffet et klaxon.
Plus : un vibreur plus dur.
Moins : un vibreur plus discret.
Pourquoi ici : Sets triggered shaker strength; inactive while the shaker feature is disabled.
Effect gains · Engine, mechanical & drag
Touchdown thump65%
Le coup unique au toucher, proportionnel au taux de chute : un kiss se murmure, une arrivée ferme cogne.
Plus : un coup plus dur au toucher.
Moins : des arrivées plus douces.
Pourquoi ici : Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Reverse rumble0%
Vibration de roulage sous inversion de poussée ou plage bêta. Zéro pour les types sans reverse.
Plus : un roulage plus rugueux sous reverse.
Moins : une reverse plus discrète.
Pourquoi ici : Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine rumble12%
Vibration continue du moteur suivant le régime du ralenti à la pleine puissance : le rappel permanent que quelque chose brûle du carburant devant.
Plus : plus de moteur dans le manche.
Moins : un moteur plus discret.
Pourquoi ici : Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Flap motion12%
Vibration continue seulement pendant que le simulateur signale les volets réellement en mouvement. Elle suit la course réelle et les pannes, pas un minuteur estimé.
Plus : plus de vibration volets en mouvement.
Moins : des courses de volets plus discrètes.
Pourquoi ici : Sets texture from observed flap movement; a command without movement does not establish the cue.
Autopilot follow
AP follow authority10%
Jusqu'où les ordres du pilote automatique peuvent bouger le manche physique. Minuscule dans MSFS, où un axe déplacé peut être relu comme entrée pilote ; zéro coupe le suivi.
Plus : le pilote automatique bouge visiblement plus votre manche.
Moins : un suivi à peine perceptible.
Pourquoi ici : Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Stick feel
StickFeel · Trim feel enabledTrue
Whether this feature is active in this profile.
Pourquoi ici : Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledTrue
Whether this feature is active in this profile.
Pourquoi ici : Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Force trim enabledFalse
Whether this feature is active in this profile.
Pourquoi ici : Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledTrue
Whether this feature is active in this profile.
Pourquoi ici : Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledTrue
Whether this feature is active in this profile.
Pourquoi ici : Enables rate damping with the configured coefficients and control law.
Autopilot
Autopilot · Follow enabledFalse
Whether this feature is active in this profile.
Pourquoi ici : Autopilot following is off; the configured spring and load retain the hardware feel.
Autopilot · Neutral hold enabledFalse
Whether this feature is active in this profile.
Pourquoi ici : Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.6
Pourquoi ici : Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero
Aero · EnabledTrue
Whether this feature is active in this profile.
Pourquoi ici : Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Max flap index3
Where this effect reaches full strength (or has fully faded, for washouts).
Plus : a more gradual build to a later peak.
Moins : a quicker build.
Pourquoi ici : Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index2
Where this effect begins fading in.
Plus : the effect begins later.
Moins : it begins earlier.
Pourquoi ici : Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Shaker enabledFalse
Whether this feature is active in this profile.
Pourquoi ici : Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Ground
Ground · EnabledTrue
Whether this feature is active in this profile.
Pourquoi ici : Enables ground effects; each still needs its own strength and contact or motion telemetry.
Engine
Engine · EnabledTrue
Whether this feature is active in this profile.
Pourquoi ici : Enables engine cues with nonzero settings and valid running-engine telemetry.
Mechanical
Mechanical · EnabledTrue
Whether this feature is active in this profile.
Pourquoi ici : Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0
The strength of this effect.
Plus : a stronger effect.
Moins : a weaker one.
Pourquoi ici : Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Tous les réglages du profil
| Paramètre | Valeur | Ce que cela contrôle et pourquoi |
|---|---|---|
| Spring strength | 0.74 | The agricultural aircraft's nominal manual-control response is independent of the constant-speed propeller cue. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 50 KIAS. |
| Spring deadband | 0.045 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Force gain | 0.8 | The aerodynamic-load gain is 0.8 with an indicated-speed reference of 100 KIAS. This supplies speed-dependent loading alongside the spring. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | True | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.5 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 14.0 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 50.0 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Vitesse de réglage des forces | 100.0 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0.15 | The high-speed spring-stiffening gain is 0.15. It strengthens the permitted spring response above 50 KIAS, with the squared-speed ratio capped at 5. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 0.72 | Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled. |
| Elevator force scale | 1.0 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| StickFeel · Trim feel enabled | True | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | True | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0.3 | Pitch relief remains a selected response to valid trim input, with the acquired datasheet not quantifying its authority. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0. |
| StickFeel · Aileron authority | 0 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| StickFeel · G load enabled | True | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | True | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. |
| Autopilot · Follow authority | 0.1 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | False | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.6 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.35 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0.14 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 3 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | True | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0.4 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0.25 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0.65 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | True | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0.12 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0.12 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Sources publiques 8
- Cessna 188Research background · Wikipedia revision 1303288571 · retrieved 2026-09-12
- Carenado C188 developer data sheet on SteamCessna 188 AGTruck
- Microsoft Flight Simulator aircraft manuals
- MSFS 2024 FAQ and edition aircraft inventory
- The Devil is in the DetailsTed Delanghe · 3 September 2025
- Don’t Give Up, Get UpGraham Lavender interviews Guy McClary · 1 August 2024
- Pilot statement concerning N731MBTorben Than Christensen · statement dated 16 August 2015
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
Communauté et corrections
Si votre expérience du type dit que cette page se trompe, corrigez-la ici.
Corrections de pilotes
Vous volez sur cet appareil ? Corrigez cette page.
Cette page repose sur des références citées, et l'expérience réelle du type vaut mieux qu'une citation. Citez l'affirmation erronée et dites-nous ce que fait l'appareil réel. Les corrections vont au mainteneur pour examen et nourrissent la prochaine révision de cette recherche.
Connectez-vous pour envoyer une correction. Pas de mot de passe, juste un lien e-mail à usage unique.
Se connecter
Discussions de hangar
Conversation ouverte sur le pilotage et le réglage du Cessna 188 AGTruck, sur le forum communautaire. Les corrections ci-dessus vont en privé au mainteneur ; les discussions de hangar sont publiques.
Connectez-vous pour la lancer. Pas de mot de passe, juste un lien e-mail à usage unique.
Se connecter
Communauté
Profils communautaires pour cet appareil
Pas encore de profils communautaires pour cet appareil.
Réglé à votre façon ? Partagez un profil et il apparaîtra ici.