Development milestones
First flight: 27 April 2005 ( 2005-04-27 )
FlugzeugbibliothekAirbus A380
Maarten Visser from Capelle aan den IJssel, Nederland · CC BY-SA 2.0 · Emirates A380Airbus A380
A full-length double-deck airliner built for very high passenger capacity.
Airliner3 Profiloptionen
Kenne das Flugzeug
The A380 arranged two passenger decks within a very large four-engine airframe. Its programme targeted heavily travelled routes and major hub airports. The aircraft's wide wing and extensive landing gear reflect the scale of the design.
Airline interiors vary substantially, so a single seating figure does not describe every A380. The simulator products also differ in the cockpit functions and systems they model.
Mehr über dieses Flugzeug auf AirframeDB
A huge aircraft, a surprisingly light touch
Mark flew an A380 from Toulouse before the 2009 Paris Air Show, joining a demonstration of new braking and traffic-avoidance functions. The cockpit was unusually spacious and quiet, and taxi cameras made keeping the aircraft on the centreline easier than he expected. Takeoff brought an odd mismatch between the speed indicated on the instruments and his muted visual sense of acceleration. Once airborne, small movements of his wrist were enough to guide the large aircraft through banked turns.
On his landing, he kept off the brake pedals while the brake-to-vacate system slowed the aircraft for the selected exit. He also watched demonstrations using artificial traffic targets and an artificially shortened runway entry. These were planned tests, not encounters with real conflicting traffic or an actual runway emergency.
An approachable giant, with room to improve the cockpit
After flying the first A380 test aircraft from Toulouse, Gerzanics told Max Kingsley-Jones that its handling felt closer to an A320 than an A340. Taxi cameras helped him position the nose gear accurately, and the cockpit height and landing-gear geometry made ground manoeuvring less daunting than its enormous wingspan suggested. The aircraft was well below its maximum takeoff weight on this particular evaluation flight.
He found the low-speed handling agile around the airport and the touchdown and lowering of the nose notably smooth. He welcomed larger displays and graphical changes to the flight plan, but his assessment was not unqualified praise: separate controls for the flight-management system, aircraft monitoring and information terminal made the integration less satisfactory than in contemporary business jets.
A dream aircraft, and the work behind every departure
Kashwani had wanted to fly the A380 from its launch, and his opportunity arrived in 2008. On his first walk-around, the scale of its wings and engines left a lasting impression. In Airbus's interview, the Emirates captain describes a responsive aircraft that he considered especially stable among the jetliners he had flown. Seeing people photograph it at takeoff or landing continued to bring back that initial sense of occasion.
His working day was more methodical than the spectacle outside suggested. He liked to reach the aircraft an hour before departure so the large crew had time to prepare, check the systems and receive the passengers. Automation provided support in cruise, while the pilots still had to identify and navigate around thunderstorms. Airbus published the interview with Kashwani.
The emergency continued after the landing
Evans was the supervising check captain in an observer seat when QF32 suffered an uncontained engine failure after departing Singapore on 4 November 2010. He describes a flood of warnings that required the five pilots to establish what still worked, discuss conflicting indications and judge which actions were appropriate. While Richard de Crespigny flew the aircraft and the operating crew worked through the problems, Evans also helped keep passengers informed. The assessment took nearly two hours before the crew returned to land.
For Evans, the period after stopping was particularly worrying. One engine continued running, fuel was leaking and the brakes were hot. The crew weighed an immediate slide evacuation against keeping passengers aboard with the cabin crew ready to act. They eventually disembarked through stairs. He emphasises shared judgement, communication and cabin-crew work during the emergency.
Öffentliche Quellen 12
- Airbus A380Research background · Wikipedia revision 1374387538 · retrieved 2026-09-12
- A380X SOP
- Microsoft Flight Simulator aircraft manuals
- A380 Airliner for MSFS-2024Official developer / designated store catalogue · checked 2026-09-12
- Flying the Airbus A380Robert P. Mark · June 2009
- Flying Airbus’s gentle giant – test-pilot’s first impressionsMike Gerzanics · 18 September 2006
- Behind the scenes with Airbus A380 pilotsAli Kashwani · April 2019
- Exclusive – Qantas QF32 flight from the cockpitDavid Evans · 8 December 2010
- Installer Guide - FlyByWire Simulations DocumentationOfficial developer / designated-store reference · checked 2026-09-14
- INOP System - FlyByWire Simulations DocumentationOfficial developer / designated-store reference · checked 2026-09-14
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- iniBuilds A380 Airliner for MSFS – iniBuilds StoreProduct listing captured 2026-09-30; edition scope from the reviewed catalogue
Wie das Profil es modelliert
FlyByWire A380X
Free + ProMSFS 2020MSFS 2024FlyByWire
The A380 arranged two passenger decks within a very large four-engine airframe. Its programme targeted heavily travelled routes and major hub airports. The aircraft's wide wing and extensive landing gear reflect the scale of the design.
This profile selects FlyByWire A380X for MSFS 2020, MSFS 2024.
The spring stays independent of airspeed. Directed aerodynamic loading is omitted.
Pitch-trim relief is off. Autopilot following is off.
Diese genaue Revision wurde noch nicht für die öffentliche Installation freigegeben.
Controls and trim
Airbus describes fully electric pitch trim, including its backup, for the A380; normal-law trim is automatic. Its hydraulic and electric actuator redundancy and gust/load alleviation act on surfaces independently of the sidesticks. iniBuilds distinguishes Trent 900 and GP7200 engines and early/modern software batches. FlyByWire's A380X operating procedures have separate scope from the A32NX systems API.
The selected implementation
The A380X SOP belongs to the A380 implementation. A32NX API identifiers are not assigned to A380X despite related operating philosophy.
About the values
The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.
Master gain & control system
Master gain85%
Die letzte Gesamtskalierung über alles, was das Modell erzeugt, vor der Gerätegrenze.
Mehr: alles (Feder, Lasten, Effekte) wird gemeinsam stärker.
Weniger: alles wird gemeinsam weicher.
Warum hier: Scales overall profile strength while preserving effect balance, subject to device and output limits.
Forces
Spring strength55%
Die Grundzentrierkraft, die den Stick zur Mitte zieht. Jede andere Kraft baut darauf auf. Zu niedrig fühlt sich der Stick im Normalflug schlaff an; zu hoch kämpft er gegen deine Hand und überdeckt die feineren Signale.
Mehr: festere Zentrierung, die der Hand jederzeit mehr widersteht.
Weniger: ein schlafferer Stick, der sich allein auf die aerodynamische Last stützt.
Warum hier: Fixed spring centering represents the passive A380 sidestick; hydraulic/electric surface redundancy does not imply stick backdrive. The baseline spring is 0.55. Low-speed spring blending is off.
Cockpit and flight control familiesA380X SOPA380 Airliner for MSFS-2024A380 FAST special: control architecture and manual pitch trimSpring deadband1%
Eine kleine neutrale Zone um die Mitte, in der die Feder ruhig bleibt, damit kleinste Bewegungen im Stand nicht flattern. Breiter ist ruhiger, aber lockerer; enger ist präziser, kann aber um die Mitte zittern.
Mehr: eine ruhigere, aber lockerere Mitte mit mehr Spiel.
Weniger: eine straffere Mitte, die in Ruhe zittern kann.
Warum hier: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Forces · Center starting force0.03
Warum hier: The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim.
Forces · Center starting force transition0.05
Warum hier: Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual.
Overall aerodynamic load0%
Ein Gesamtmaß über beide anhaltenden Achslasten, vor ihrer Einzelbalance angewendet. Profile lassen es normalerweise stehen und stimmen die beiden Achslasten ab.
Mehr: beide Achsen laden härter auf.
Weniger: beide Achsen werden gemeinsam leichter.
Warum hier: The stored 0 aerodynamic-load gain is inactive under the fixed-centre control law.
Airspeed blendingFalse
Aktiviert das Niedrigfahrt-Einblendfenster der Feder (Beginn/Voll in Knoten oben). Aus bleibt die Feder bei jeder Fahrt konstant.
Warum hier: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Low-speed spring floor50%
Wie viel Feder im Stillstand übrig bleibt, bevor Fahrt überhaupt aerodynamische Kraft aufbauen kann. Ein hoher Sockel hält den geparkten Stick straff; ein niedriger ergibt das lose Seilzuggefühl eines geparkten Leichtflugzeugs.
Mehr: ein festerer Stick beim Parken und Rollen.
Weniger: ein schlaffer geparkter Stick, der erst mit Fahrt aufwacht.
Warum hier: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring engagement start8 kt
Die Fahrt, ab der die Feder vom Niedrigfahrt-Sockel Richtung volle Stärke steigt: der Beginn des "Lebendigwerdens" der Ruder im Startlauf.
Warum hier: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring engagement full65 kt
Die Fahrt, bei der die Feder volle Stärke erreicht. Zwischen Beginn und diesem Punkt strafft sich die Zentrierung zunehmend mit der Anströmung.
Warum hier: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Geschwindigkeit zur Kraftabstimmung250
Die angezeigte Fahrt, bei der die aerodynamische Last ihr ausgelegtes Vollniveau erreicht. Sie verankert die gesamte Lastkurve am realen Geschwindigkeitsbereich: eine 172 lädt bis 110 Knoten auf, ein Jet viel später.
Mehr: Lasten kommen später; der Stick bleibt bis zu höherer Fahrt leicht.
Weniger: Lasten kommen früher, und die Reise fühlt sich schwerer an.
Warum hier: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Centre firmness vs speed0%
Wie stark sich die Zentrierung selbst mit der Fahrt strafft, zusätzlich zu den Ausschlaglasten. Null hält das Mittengefühl konstant; mehr lässt den Stick im Reiseflug härter und im Anflug lockerer zentrieren.
Mehr: eine Mitte, die mit Fahrt spürbar härter wird.
Weniger: konstantes Mittengefühl bei jeder Fahrt.
Warum hier: Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase.
Centre stiffening cap5
Die Obergrenze der fahrtabhängigen Mittenstraffung, damit sehr hohe Fahrt die Feder nicht grenzenlos aufzieht.
Mehr: mehr Gesamtstraffung bei hoher Fahrt erlaubt.
Weniger: die Straffung klemmt früher ab.
Warum hier: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron load72%
Die anhaltende Rolllast aus Querruderausschlag und Fahrt, unabhängig vom Nick balanciert. Zusammen mit der Höhenruderlast bestimmt sie die Ruderharmonie, von der Testberichte sprechen.
Mehr: schwerere Rollkräfte.
Weniger: leichtere, quirligere Querruder.
Warum hier: Roll and pitch aerodynamic scales are 0.72 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance.
Elevator load100%
Die anhaltende Nicklast aus Höhenruderausschlag und Fahrt, unabhängig von der Rollachse balanciert. Der Haupthebel für das Nickgewicht eines Musters. Er verändert weder Querruder, Feder, Trimmung noch Schüttelkräfte.
Mehr: schwerere anhaltende Nickkräfte bei Fahrt.
Weniger: ein leichteres Höhenruder, das weniger Muskel braucht.
Warum hier: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Max output force55%
Eine Kappe je stetiger Nick- oder Rollkraft vor dem Gerät. Der Schutz davor, die Hardware in harten Manövern zu überfahren oder zu sättigen.
Mehr: stärkere Spitzenkräfte vor dem Abschneiden.
Weniger: eine sanftere Decke; harte Manöver flachen früher ab.
Warum hier: Caps directed-force output. Native spring effects and device limits remain separate.
Trim
Trim relief (elevator)0%
Wie stark Höhenrudertrimmung die gehaltene Nickkraft abbaut und den Ruhepunkt des Sticks verschiebt. Bei 100 % braucht ein sauber getrimmtes Flugzeug keinen gehaltenen Druck: das Wegtrimmen der Last wie im echten Fliegen.
Mehr: Trimmung nimmt mehr der gehaltenen Nickkraft; bei 100 % nullt volle Trimmung sie.
Weniger: du hältst auch getrimmt weiter Kraft.
Warum hier: Automatic aircraft trim and the absence of a mechanical trim wheel keep hardware-centre movement separate from stabilizer operation. Pitch relief is off, with stored authority 0; roll authority is 0.
Cockpit and flight control familiesA380X SOPA380 Airliner for MSFS-2024A380 FAST special: control architecture and manual pitch trimTrim relief (aileron)0%
Dieselbe Entlastung für Rolltrimmung. Die meisten GA-Muster haben keine echte Querrudertrimmung, daher bleibt sie bei null; Muster mit Rolltrimmung bekommen einen passenden Wert.
Mehr: Rolltrimmung nimmt mehr gehaltene Rollkraft.
Weniger: Rolltrimmung bewirkt weniger.
Warum hier: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
Effect gains · Ground
Runway rumble0%
Rollende Untergrundvibration aus Radgeschwindigkeit und Oberflächenart: die Textur von Asphalt, Gras oder Schotter unter dem Fahrwerk.
Mehr: lautere Oberflächentextur durch den Stick.
Weniger: ruhigeres Rollen.
Warum hier: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Gear bumps0%
Kurze einzelne Stöße von Dehnfugen, Spurrillen und rauem Belag: die Interpunktion über dem kontinuierlichen Rumpeln.
Mehr: schärfere Stöße von Fugen und Rillen.
Weniger: weichere Bodendetails.
Warum hier: Sets gear-bump texture during ground motion, separate from touchdown impact.
Effect gains · Airframe
Stall buffet6%
Zellenschütteln vor dem Überziehen und bei aktiver Überziehwarnung: wie laut diese Fläche ihr Unbehagen ankündigt. Muster mit sauberem Abriss bekommen moderates Schütteln, das Horn trägt die Warnung.
Mehr: lauteres Schütteln vor dem Überziehen.
Weniger: eine leisere Fläche; das Horn trägt die Warnung.
Warum hier: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Mach buffet6%
Transsonisches Schütteln nahe der Machgrenze. Relevant für Jets nahe MMO, null für Kolben und Turboprops, die nie dort ankommen.
Mehr: stärkeres transsonisches Schütteln nahe der Machgrenze.
Weniger: ruhigerer Flug bei hohem Mach.
Warum hier: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Flap buffet0%
Niederfrequente Zellenvibration mit Klappen im Fahrtwind, im Fenster, in dem sie wirklich Luft arbeiten.
Mehr: ein rauerer Lauf mit arbeitenden Klappen.
Weniger: ruhigere Anflugklappen.
Warum hier: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Gear buffet0%
Zellentrommeln vom ausgefahrenen Einziehfahrwerk im Fahrtwind. Null für Festfahrwerke, deren Zelle nie die Form ändert.
Mehr: mehr Trommeln mit hängendem Fahrwerk.
Weniger: saubererer Flug mit Fahrwerk.
Warum hier: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Stick shaker50%
Der dedizierte Stall-Stickshaker-Buzz, ausgelöst von der Überziehwarnanlage des Flugzeugs. Nur Muster mit echtem Shaker bekommen einen Wert; alle anderen verlassen sich auf Schütteln und Horn.
Mehr: ein härterer Shaker-Buzz.
Weniger: ein dezenterer Shaker.
Warum hier: Sets triggered shaker strength; inactive while the shaker feature is disabled.
Effect gains · Engine, mechanical & drag
Touchdown thump0%
Der Einmalstoß beim Aufsetzen, skaliert mit der Sinkrate: ein Butterlander flüstert, ein fester Aufsetzer wummst.
Mehr: ein härterer Tritt beim Aufsetzen.
Weniger: weichere Ankünfte.
Warum hier: Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Reverse rumble0%
Ausrollvibration bei Schubumkehr oder Beta-Verstellung. Null für Muster ohne Umkehr.
Mehr: ein rauerer Ausrollvorgang unter Umkehrschub.
Weniger: leisere Umkehr.
Warum hier: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine rumble0%
Kontinuierliche Triebwerksvibration, die der Drehzahl von Leerlauf bis Volllast folgt: die allgegenwärtige Erinnerung, dass vorn etwas Kraftstoff verbrennt.
Mehr: mehr Triebwerk im Stick.
Weniger: ein leiseres Triebwerk.
Warum hier: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Flap motion0%
Dauervibration nur, solange der Simulator tatsächlich fahrende Klappenflächen meldet. Folgt echter Aktuatorbewegung und Ausfällen, keinem geschätzten Timer.
Mehr: mehr Vibration bei fahrenden Klappen.
Weniger: leisere Klappenläufe.
Warum hier: Sets texture from observed flap movement; a command without movement does not establish the cue.
Autopilot follow
AP follow authority5%
Wie weit Autopilotbefehle den physischen Stick bewegen dürfen. In MSFS winzig gehalten, weil eine bewegte Achse als Pilotene ingabe zurückgelesen werden kann; null schaltet das Folgen ab.
Mehr: der Autopilot bewegt deinen Stick sichtbar weiter.
Weniger: ein kaum wahrnehmbares Folgen.
Warum hier: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Spring response
SpringResponse · Travel enabledTrue
Whether this feature is active in this profile.
Warum hier: Applies the configured pitch and roll spring travel curves.
SpringResponse · Output1
Warum hier: Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel.
SpringResponse · Output0.3
Warum hier: Sets response at the second roll-curve point; its input position and other points determine the travel law.
Stick feel
StickFeel · Trim feel enabledFalse
Whether this feature is active in this profile.
Warum hier: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledFalse
Whether this feature is active in this profile.
Warum hier: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Force trim enabledFalse
Whether this feature is active in this profile.
Warum hier: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledFalse
Whether this feature is active in this profile.
Warum hier: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledFalse
Whether this feature is active in this profile.
Warum hier: Enables rate damping with the configured coefficients and control law.
Autopilot
Autopilot · Follow enabledFalse
Whether this feature is active in this profile.
Warum hier: Autopilot following is off; the configured spring and load retain the hardware feel. Separate neutral hold is on at strength 0.28, when a supported autopilot state admits it.
Autopilot · Neutral hold enabledTrue
Whether this feature is active in this profile.
Warum hier: Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.28
Warum hier: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero
Aero · EnabledTrue
Whether this feature is active in this profile.
Warum hier: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Max flap index4
Where this effect reaches full strength (or has fully faded, for washouts).
Mehr: a more gradual build to a later peak.
Weniger: a quicker build.
Warum hier: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index2
Where this effect begins fading in.
Mehr: the effect begins later.
Weniger: it begins earlier.
Warum hier: Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Shaker enabledFalse
Whether this feature is active in this profile.
Warum hier: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Ground
Ground · EnabledFalse
Whether this feature is active in this profile.
Warum hier: Enables ground effects; each still needs its own strength and contact or motion telemetry.
Engine
Engine · EnabledFalse
Whether this feature is active in this profile.
Warum hier: Enables engine cues with nonzero settings and valid running-engine telemetry.
Mechanical
Mechanical · EnabledTrue
Whether this feature is active in this profile.
Warum hier: Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0
The strength of this effect.
Mehr: a stronger effect.
Weniger: a weaker one.
Warum hier: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Alle Profileinstellungen
| Parameter | Wert | Was es steuert und warum |
|---|---|---|
| Spring strength | 0.55 | Fixed spring centering represents the passive A380 sidestick; hydraulic/electric surface redundancy does not imply stick backdrive. The baseline spring is 0.55. Low-speed spring blending is off. |
| Spring deadband | 0.01 | Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner. |
| Forces · Center starting force | 0.03 | The centre preload is 0.03. It ramps outside the 0.01 deadband across 0.05 travel, shaping the passive centre independently of aircraft autotrim. |
| Forces · Center starting force transition | 0.05 | Sets the travel used to ramp in centre preload. Wider intervals make its onset more gradual. |
| Force gain | 0 | The stored 0 aerodynamic-load gain is inactive under the fixed-centre control law. |
| Master gain | 0.85 | Scales overall profile strength while preserving effect balance, subject to device and output limits. |
| Dynamic-pressure blend | False | Allows baseline spring strength to rise with indicated airspeed where the control law permits it. |
| Minimum spring factor | 0.5 | Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength. |
| Spring wake-up speed | 8 kt | Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit. |
| Spring full-strength speed | 65 kt | Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it. |
| Geschwindigkeit zur Kraftabstimmung | 250 kt | Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit. |
| Airspeed spring stiffening | 0 | Adds permitted spring resistance above the full-blend speed. Zero removes this high-speed increase. |
| Airspeed stiffening cap | 5 | Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap. |
| Aileron force scale | 0.72 | Roll and pitch aerodynamic scales are 0.72 and 1, respectively. These stored weights do not create directed aerodynamic loading while that term is inactive. The pitch spring-travel curve reaches output 1 at input 1. The roll spring-travel curve reaches output 0.3 at input 1. Spring-travel response contributes separately to axis balance. |
| Elevator force scale | 1 | Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings. |
| Maximum output force | 0.55 | Caps directed-force output. Native spring effects and device limits remain separate. |
| SpringResponse · Travel enabled | True | Applies the configured pitch and roll spring travel curves. |
| SpringResponse · Output | 1 | Sets response at the second pitch-curve point; it is an endpoint only if its input position is full travel. |
| SpringResponse · Output | 0.3 | Sets response at the second roll-curve point; its input position and other points determine the travel law. |
| StickFeel · Trim feel enabled | False | Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement. |
| StickFeel · Trim relief enabled | False | Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount. |
| StickFeel · Elevator authority | 0 | Automatic aircraft trim and the absence of a mechanical trim wheel keep hardware-centre movement separate from stabilizer operation. Pitch relief is off, with stored authority 0; roll authority is 0. |
| StickFeel · Aileron authority | 0 | Scales supported roll-trim relief and permitted centre movement. Zero removes roll response. |
| StickFeel · Force trim enabled | False | Enables local force trim, separate from aircraft-owned trim and add-on integration qualification. |
| StickFeel · G load enabled | False | Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it. |
| StickFeel · Rate damping enabled | False | Enables rate damping with the configured coefficients and control law. |
| Autopilot · Follow enabled | False | Autopilot following is off; the configured spring and load retain the hardware feel. Separate neutral hold is on at strength 0.28, when a supported autopilot state admits it. |
| Autopilot · Follow authority | 0.05 | Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply. |
| Autopilot · Neutral hold enabled | True | Permits centering hold during a supported AP state, separate from following a moving target. |
| Autopilot · Neutral hold strength | 0.28 | Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled. |
| Aero · Enabled | True | Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions. |
| Aero · Gain | 0.06 | Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings. |
| Aero · Gain | 0.06 | Sets high-Mach buffet strength; onset and full-strength thresholds are separate. |
| Aero · Gain | 0 | Sets flap buffet at the configured position and speed gates. Flap movement texture is separate. |
| Aero · Max flap index | 4 | Sets the final flap index for detent normalization. UP plus three detents uses maximum index3. |
| Aero · Min flap index | 2 | Sets the first flap detent that admits buffet; this is a handle index, not degrees. |
| Aero · Gain | 0 | Sets gear aerodynamic buffet; movement and ground-contact cues are separate. |
| Aero · Shaker enabled | False | Permits shaker at supported warning conditions; the switch does not establish aircraft equipment. |
| Aero · Amplitude | 0.5 | Sets triggered shaker strength; inactive while the shaker feature is disabled. |
| Ground · Enabled | False | Enables ground effects; each still needs its own strength and contact or motion telemetry. |
| Ground · Gain | 0 | Sets rolling texture strength, modified by speed, surface and undercarriage configuration. |
| Ground · Gain | 0 | Sets gear-bump texture during ground motion, separate from touchdown impact. |
| Ground · Gain | 0 | Sets landing-impact strength; landing telemetry and response shape determine the pulse. |
| Ground · Gain | 0 | Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue. |
| Engine · Enabled | False | Enables engine cues with nonzero settings and valid running-engine telemetry. |
| Engine · Gain | 0 | Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration. |
| Mechanical · Enabled | True | Enables accessory cues with configured strengths and observed accessory movement. |
| Mechanical · Gain | 0 | Sets texture from observed flap movement; a command without movement does not establish the cue. |
| Mechanical · Gain | 0 | Sets texture from observed gear movement, separate from aerodynamic and touchdown effects. |
Öffentliche Quellen 17
- Airbus A380Research background · Wikipedia revision 1374387538 · retrieved 2026-09-12
- Cockpit and flight control familiesAirbus cockpit family descriptions; Airbus cockpit commonality, sidestick philosophy; Airbus cockpit commonality
- A380X SOPA380X standard operating procedures, control and autoflight flows
- A380 Airliner for MSFS-2024System features, productversion and requirementsOfficial developer / designated store catalogue · checked 2026-09-12
- A380 FAST special: control architecture and manual pitch trimAirbusFASTNovember2016PDF pp22,45
- Sidestick controlsSidesticks section, revised 2026-08-31
- Simulator edition downloadsDownloads grouped by Microsoft Flight Simulator 2020 and 2024
- A32NX systems APIATA 27 and FCDC discrete words
- Microsoft Flight Simulator aircraft manuals
- Flying the Airbus A380Robert P. Mark · June 2009
- Flying Airbus’s gentle giant – test-pilot’s first impressionsMike Gerzanics · 18 September 2006
- Behind the scenes with Airbus A380 pilotsAli Kashwani · April 2019
- Exclusive – Qantas QF32 flight from the cockpitDavid Evans · 8 December 2010
- Installer Guide - FlyByWire Simulations DocumentationOfficial developer / designated-store reference · checked 2026-09-14
- INOP System - FlyByWire Simulations DocumentationOfficial developer / designated-store reference · checked 2026-09-14
- ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
- iniBuilds A380 Airliner for MSFS – iniBuilds StoreProduct listing captured 2026-09-30; edition scope from the reviewed catalogue
Community & Korrekturen
Wenn deine Erfahrung im Muster sagt, dass hier etwas falsch ist, korrigiere es hier.
Pilotenkorrekturen
Du fliegst dieses Muster? Korrigiere diese Seite.
Diese Seite basiert auf zitierten Quellen, und echte Erfahrung im Muster schlägt jedes Zitat. Zitiere die falsche Aussage und sag uns, was das echte Flugzeug tut. Korrekturen gehen zur Prüfung an den Maintainer und fließen in die nächste Fassung dieser Recherche ein.
Melde dich an, um eine Korrektur einzureichen. Kein Passwort, nur ein einmaliger E-Mail-Link.
Anmelden
Hangargespräche
Offene Unterhaltung über das Fliegen und Tunen der Airbus A380, im Community-Forum. Korrekturen oben gehen privat an den Maintainer; Hangargespräche sind öffentlich.
Melde dich an, um sie zu starten. Kein Passwort, nur ein einmaliger E-Mail-Link.
Anmelden
Community
Community-Profile für dieses Luftfahrzeug
Noch keine Community-Profile für dieses Luftfahrzeug.
Nach deinem Geschmack getunt? Teile ein Profil und es erscheint hier.