Airbus A310-300MarcelX42 · CC BY-SA 4.0 · Pakistan International Airlines A310-308

Airbus A310-300

A shorter wide-body Airbus from the transition to two-pilot, electronic-instrument cockpits.
AirlinerВариантов профиля: 3

Знакомство с воздушным судном

Airbus developed the A310 to serve a market below the larger A300. The first prototype flew in 1982, and the type entered airline service the following year. Its broad fuselage and two underwing engines retain the family resemblance, but it brought a new wing and a shorter cabin.

The A310-300 extended the design's range and used fuel in the horizontal stabilizer for trim management. Electronic displays and flight management sit alongside controls that predate the A320's sidestick fly-by-wire family.

Aircraft / family

Propulsion
Twin jet↗
Configuration
Wide-body · Two-pilot flight deck↗

Airbus A310 · Specifications (A310-325) · real aircraft; source units retained

Length
46.66 m (153 ft 1 in)↗
Wingspan
43.90 m (144 ft 0.3 in)↗
Height
15.867 m (52 ft 0.7 in) at operating empty weight↗
Wing area
219.00 m² (2,357.3 sq ft)↗
Empty weight
79,166 kg (174,528 lb)↗
Max takeoff weight
164,000 kg (361,557 lb)↗
Powerplant
2 × Pratt & Whitney PW4156A high bypass turbofan , 249.08 kN (56,000 lbf) thrust each↗
Maximum speed
Mach 0.84↗
Range
9,540 km (5,930 mi, 5,150 nmi)↗
Service ceiling
12,530 m (41,100 ft)↗

Подробнее об этом воздушном судне на AirframeDB

Helping create a new weightless laboratory

Delesalle helped develop the A310 Zero G's special parabolic-flight display and carried out many of its tests. In DLR's interview, his attachment to the aircraft is clear: the programme combined developing a new tool with the demanding manual flying he already enjoyed on the A300. Development-simulator work helped the team design the display and introduce pilots to it, followed by training flights in the actual aircraft.

Comparing the two research aircraft, he preferred the A310's newer navigation equipment and more comfortable operation, while their shared systems architecture made the conversion familiar. He also found the shorter aircraft easier to fly. Thousands of parabolas had not removed the challenge. He describes the concentration and accuracy the manoeuvres require, and the satisfaction of hearing that the scientists obtained good results. The campaign's close contact between flight crew and researchers was part of its appeal.

Learning the Airbus as East Germany changed

Hakansson recalls being selected for A310 first-officer duties in 1988 after years alternating between navigator and pilot work on Interflug's Tu-134s. Airbus conversion training took him to Toulouse in autumn 1989. He remembers following the political changes at home on television in France while learning the new aircraft. The A310 subsequently carried him to destinations including Havana, Beijing, Bangkok and Dubai.

His memories connect that long-haul opportunity with the circumstances of being an East German airline pilot. Permission to fly outside socialist countries had previously been restricted and withdrawn, then restored before the change of government. Flying brought access to places and people many of his compatriots could not visit, but long absences were difficult for his family when international calls were expensive. In this 2018 career interview, the Airbus marks a personal and historical transition; he does not offer a detailed handling assessment.

A remembered approach into Kathmandu

Asked about the happiest moments in her flying career, Pflaum returns to Kathmandu in the A310. The rotation ran from Frankfurt through Karachi, where the crew stayed overnight, before continuing to Nepal and returning by the same route. She remembers the daylight view and the demanding arrival into the high-elevation airport with particular enthusiasm. That specific trip stands out within a much longer career across several Airbus and McDonnell Douglas types.

The wider interview explains why the experience stayed with her: curiosity about places and a continuing enjoyment of aircraft remained central to the job. By the 2024 interview, she was also an instructor who emphasised constructive feedback, teamwork and decision-making. Her Kathmandu recollection is an airline pilot's personal memory, accompanied by that later professional perspective; the article supplies no detailed account of the A310's approach procedure or handling.

Открытые источники 10
  1. Airbus A310Research background · Wikipedia revision 1369233900 · retrieved 2026-09-12
  2. A310_MSFS_Manual v2
  3. Microsoft Flight Simulator aircraft manuals
  4. MSFS 2024 FAQ and edition aircraft inventory
  5. MSFS 2020 FAQ and edition aircraft inventory
  6. Interview: flying the A310 Zero GDLR brochure, August 2015 imprint; PDF pp.11–12 / printed pp.20–23. Modified A310 Zero G; complete interview read.
  7. Interview with an Interflug pilotTed Wende interview, Austrian Wings, 8 April 2018. Retrospective A310 conversion and Interflug career account; full interview read.
  8. Interview with Lufthansa captain Cordula PflaumaeroTELEGRAPH interview, 14 April 2024. A310 Kathmandu recollection within a mixed-fleet career interview; full text read.
  9. ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03
  10. Airbus A310-304-CremonaSoft-A310Product listing captured 2026-09-23; edition scope from the reviewed catalogue

Как профиль это моделирует

CremonaSoft Airbus A310-304

Free + Pro
X-Plane 12CremonaSoft

Airbus developed the A310 to serve a market below the larger A300. The first prototype flew in 1982, and the type entered airline service the following year. Its broad fuselage and two underwing engines retain the family resemblance, but it brought a new wing and a shorter cabin.

This profile selects CremonaSoft Airbus A310-304 for X-Plane 12.

The spring stays independent of airspeed. A separate aerodynamic term adds speed-dependent control load.

Pitch-trim relief is off. Autopilot following is off.

Эта точная редакция пока не доступна для публичной установки.

Controls and trim

The A310 manual identifies pitch and rudder trim, control-surface checks and separate AP1/AP2 engagement. Its cockpit predates the A320's sidestick controls. CremonaSoft's A310-304 and MRTT use the CF6-80C2 and their own hydraulic, electrical and autoflight systems; its version history records removal of CWS for further work. These are separate implementation details from the bundled iniBuilds guide.

Cockpit and flight control familiesA310_MSFS_Manual v2

The selected implementation

CremonaSoft's CF6-powered A310-304/MRTT has custom systems; recorded CWS removal remains version history rather than an assumed current following mode.

Airbus A310-304-CremonaSoft-A310

About the values

The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.

Общее усиление и система управления

Master gain85%

Итоговый общий масштаб вывода, применяемый ко всему, что выдает модель, до ограничения устройства.

Больше: все (пружина, нагрузки, эффекты) одновременно усиливается.

Меньше: все одновременно становится мягче.

Почему так: Scales overall profile strength while preserving effect balance, subject to device and output limits.

Усилия

Spring strength74%

Базовое центрирующее усилие, которое возвращает джойстик в центр. Все остальные усилия накладываются на него. Слишком низкое — и джойстик кажется вялым в обычном полете; слишком высокое — и он сопротивляется руке и заглушает более слабые эффекты, наложенные поверх.

Больше: более жесткое центрирование, постоянно сопротивляющееся руке.

Меньше: более вялый джойстик, опирающийся только на аэродинамическую нагрузку.

Почему так: A conventional powered-control starting law supplies yoke resistance; the A310's autoflight state does not define an external servo position. The baseline spring is 0.74. Low-speed spring blending is off.

Cockpit and flight control familiesA310_MSFS_Manual v2
Spring deadband4%

Небольшая нейтральная зона вокруг центра, в которой пружина не действует, чтобы мелкие движения в покое не вызывали дребезга. Шире — спокойнее, но свободнее; уже — точнее, но джойстик может подергиваться около центра.

Больше: более спокойный, но более свободный центр с большим люфтом.

Меньше: более плотный центр, который может дребезжать в покое.

Почему так: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.

Overall aerodynamic load25%

Общий множитель для обеих постоянных нагрузок по осям, применяемый до их независимой балансировки. Обычно профили его не трогают и вместо этого настраивают нагрузки двух осей.

Больше: обе оси нагружаются сильнее.

Меньше: обе оси одновременно становятся легче.

Почему так: The aerodynamic-load gain is 0.25 with an indicated-speed reference of 240 KIAS. The hydraulic-load factor of 0.35 scales that modeled term; it is a selected artificial-feel approximation.

Airspeed blendingFalse

Включает окно нарастания пружины на малой скорости (начальная и полная скорость в узлах, см. выше). Если выключено, пружина постоянна на всех скоростях.

Почему так: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.

Low-speed spring floor55%

Какая доля пружины сохраняется на стоянке, пока скорость еще не создала никакого аэродинамического усилия. Высокий минимум оставляет джойстик на стоянке упругим; низкий дает свободные ощущения провисших тросов, как у легкого самолета на стоянке.

Больше: более упругий джойстик на стоянке и при рулении.

Меньше: более свободно болтающийся джойстик на стоянке, который оживает только с ростом скорости.

Почему так: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.

Spring engagement start8 kt

Скорость, на которой пружина начинает расти от минимума на малой скорости к полной силе: органы управления «оживают» на разбеге.

Почему так: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.

Spring engagement full65 kt

Скорость, на которой пружина достигает полной силы. Между начальной скоростью и этой точкой центрирование постепенно становится жестче по мере усиления обтекания рулей.

Почему так: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.

Скорость настройки усилия240

Приборная скорость, на которой аэродинамическая нагрузка достигает расчетного полного уровня. Она привязывает всю кривую нагрузки к реальному диапазону скоростей воздушного судна: у 172 нагрузка набирается к 110 узлам, у реактивного самолета — намного позже.

Больше: нагрузки приходят позже; джойстик остается легким до более высокой скорости.

Меньше: нагрузки приходят раньше, и в крейсерском полете управление тяжелее.

Почему так: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.

Centre firmness vs speed0%

Насколько само центрирование становится жестче со скоростью, в дополнение к нагрузкам от отклонения. Ноль сохраняет ощущения в центре постоянными; большее значение делает центр джойстика жестче в крейсерском полете и мягче при полете по кругу.

Больше: центр заметно становится жестче с ростом скорости.

Меньше: постоянные ощущения в центре на любой скорости.

Почему так: The high-speed spring-stiffening gain is 0. No additional speed-driven stiffening is added; this does not disable independent aerodynamic loading.

Centre stiffening cap5

Верхний предел скоростного ужесточения центра, чтобы очень быстрый полет не мог затягивать пружину без ограничений.

Больше: на большой скорости допускается большее общее ужесточение.

Меньше: ужесточение ограничивается раньше.

Почему так: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.

Aileron load72%

Постоянная нагрузка по крену от отклонения элеронов и скорости, балансируемая независимо от тангажа. Вместе с нагрузкой руля высоты она задает соотношение усилий по осям (гармонию управления), о котором пишут обозреватели.

Больше: более тяжелые усилия по крену.

Меньше: более легкие элероны, которые кажутся более быстрыми.

Почему так: Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.

Elevator load100%

Постоянная нагрузка по тангажу от отклонения руля высоты и скорости, балансируемая независимо от крена. Это главный регулятор тяжести тангажа у данного типа. Он не затрагивает усилия элеронов, пружины, триммера и бафтинга.

Больше: более тяжелые постоянные усилия по тангажу на скорости.

Меньше: более легкий руль высоты, который требует меньше сил для удержания.

Почему так: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.

Max output force55%

Ограничение каждого постоянного усилия по тангажу или крену до того, как оно дойдет до устройства; защищает оборудование от ударов и насыщения при энергичных маневрах.

Больше: более сильные пиковые постоянные усилия до срезания.

Меньше: более мягкий предел; при резких маневрах усилие раньше перестает расти.

Почему так: Caps directed-force output. Native spring effects and device limits remain separate.

Триммер

Trim relief (elevator)0%

Насколько сильно триммер руля высоты снимает удерживаемое усилие по тангажу и смещает положение, в котором устанавливается джойстик. При 100% правильно оттриммированное воздушное судно не требует удерживающего давления — как в реальном полете, где нагрузку снимают триммером.

Больше: триммер снимает большую часть удерживаемого усилия по тангажу; при 100% полное триммирование сводит его к нулю.

Меньше: даже после триммирования приходится удерживать усилие.

Почему так: Pitch-trim setup is documented, but the profile's amount of trim-centre movement remains a selected approximation of powered-control feel. Pitch relief is off, with stored authority 0; roll authority is 0.

Cockpit and flight control familiesA310_MSFS_Manual v2
Trim relief (aileron)0%

Такая же разгрузка для триммера крена. У большинства типов авиации общего назначения нет настоящего триммера элеронов, поэтому здесь остается ноль; типы с триммером крена получают соответствующее значение.

Больше: триммер крена снимает больше удерживаемого усилия по крену.

Меньше: триммер крена действует слабее.

Почему так: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.

Усиление эффектов · Земля

Runway rumble40%

Вибрация при качении по поверхности в зависимости от скорости колес и типа покрытия: асфальт, трава или гравий под шасси.

Больше: более выраженная фактура покрытия в джойстике.

Меньше: более плавное руление.

Почему так: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.

Gear bumps25%

Короткие отдельные толчки от деформационных швов, колеи и неровного покрытия, прерывающие непрерывную тряску.

Больше: более резкие удары от стыков и колеи.

Меньше: более мягкие детали покрытия.

Почему так: Sets gear-bump texture during ground motion, separate from touchdown impact.

Усиление эффектов · Планер

Stall buffet0%

Тряска планера при приближении к сваливанию и пока активна сигнализация сваливания: насколько громко это крыло сообщает, что ему плохо. Типы с четким сваливанием получают умеренный бафтинг и оставляют предупреждение звуковой сирене.

Больше: более сильная тряска перед сваливанием.

Меньше: более спокойное крыло; предупреждает звуковая сирена.

Почему так: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.

Mach buffet0%

Трансзвуковой бафтинг при приближении к ограничению по числу М. Имеет смысл для реактивных самолетов вблизи MMO; ноль для поршневых и турбовинтовых, которые туда никогда не добираются.

Больше: более сильный трансзвуковой бафтинг вблизи ограничения по числу М.

Меньше: более плавный полет на больших числах М.

Почему так: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.

Flap buffet0%

Низкочастотная вибрация планера при выпущенных в поток закрылках, в том диапазоне скоростей, где они действительно работают в потоке.

Больше: более тряский полет, когда закрылки работают в потоке.

Меньше: более плавный заход с выпущенными закрылками.

Почему так: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.

Gear buffet0%

Дробная вибрация планера от выпущенного в поток убираемого шасси. Ноль для типов с неубираемым шасси, у которых форма планера никогда не меняется.

Больше: сильнее дробная вибрация с выпущенными колесами.

Меньше: более чистый полет с выпущенным шасси.

Почему так: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.

Stick shaker50%

Отдельное дрожание вибратора штурвала при сваливании, запускаемое собственной системой предупреждения о сваливании воздушного судна. Значение получают только типы с настоящим вибратором штурвала; все остальные полагаются на аэродинамический бафтинг и звуковую сирену.

Больше: более сильное дрожание вибратора штурвала.

Меньше: более слабый вибратор штурвала.

Почему так: Sets triggered shaker strength; inactive while the shaker feature is disabled.

Усиление эффектов · Двигатель, механика и сопротивление

Touchdown thump65%

Разовый толчок при касании колесами ВПП, зависящий от вертикальной скорости снижения: мягкая посадка едва ощутима, жесткая отдается ударом.

Больше: более сильный толчок при касании.

Меньше: более мягкие посадки.

Почему так: Sets landing-impact strength; landing telemetry and response shape determine the pulse.

Reverse rumble0%

Вибрация на пробеге при работе реверса тяги или винтов в бета-режиме. Ноль для типов без реверса.

Больше: более тряский пробег на реверсе.

Меньше: более тихий реверс.

Почему так: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.

Engine rumble0%

Непрерывная вибрация силовой установки, следующая за оборотами от малого газа до полной мощности, — постоянное напоминание о том, что впереди что-то сжигает топливо.

Больше: двигатель сильнее ощущается в джойстике.

Меньше: более тихая силовая установка.

Почему так: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.

Flap motion12%

Непрерывная вибрация, только пока симулятор сообщает, что закрылки действительно движутся. Она следует за реальным движением приводов и отказами, а не за расчетным таймером.

Больше: сильнее вибрация, пока закрылки движутся.

Меньше: более тихое движение закрылков.

Почему так: Sets texture from observed flap movement; a command without movement does not establish the cue.

Следование за автопилотом

AP follow authority10%

Насколько далеко команды автопилота могут физически перемещать джойстик. В MSFS значение минимально, потому что смещенная ось может считываться обратно как ввод пилота; ноль полностью отключает следование.

Больше: автопилот заметно дальше отклоняет ваш джойстик.

Меньше: едва ощутимое следование.

Почему так: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.

Stick feel

StickFeel · Trim feel enabledFalse

Whether this feature is active in this profile.

Почему так: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.

StickFeel · Trim relief enabledFalse

Whether this feature is active in this profile.

Почему так: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.

StickFeel · Force trim enabledFalse

Whether this feature is active in this profile.

Почему так: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.

StickFeel · G load enabledTrue

Whether this feature is active in this profile.

Почему так: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.

StickFeel · Rate damping enabledTrue

Whether this feature is active in this profile.

Почему так: Enables rate damping with the configured coefficients and control law.

Autopilot

Autopilot · Follow enabledFalse

Whether this feature is active in this profile.

Почему так: Autopilot following is off; the configured spring and load retain the hardware feel.

Autopilot · Neutral hold enabledFalse

Whether this feature is active in this profile.

Почему так: Permits centering hold during a supported AP state, separate from following a moving target.

Autopilot · Neutral hold strength0.6

Почему так: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.

Aero

Aero · EnabledTrue

Whether this feature is active in this profile.

Почему так: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.

Aero · Max flap index3

Where this effect reaches full strength (or has fully faded, for washouts).

Больше: a more gradual build to a later peak.

Меньше: a quicker build.

Почему так: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.

Aero · Min flap index2

Where this effect begins fading in.

Больше: the effect begins later.

Меньше: it begins earlier.

Почему так: Sets the first flap detent that admits buffet; this is a handle index, not degrees.

Aero · Shaker enabledFalse

Whether this feature is active in this profile.

Почему так: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.

Ground

Ground · EnabledTrue

Whether this feature is active in this profile.

Почему так: Enables ground effects; each still needs its own strength and contact or motion telemetry.

Engine

Engine · EnabledFalse

Whether this feature is active in this profile.

Почему так: Enables engine cues with nonzero settings and valid running-engine telemetry.

Mechanical

Mechanical · EnabledTrue

Whether this feature is active in this profile.

Почему так: Enables accessory cues with configured strengths and observed accessory movement.

Mechanical · Gain0.025

The strength of this effect.

Больше: a stronger effect.

Меньше: a weaker one.

Почему так: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.

Все настройки профиля
Оценочные настройки профиля
ПараметрЗначениеЧто регулирует и почему
Spring strength0.74 A conventional powered-control starting law supplies yoke resistance; the A310's autoflight state does not define an external servo position. The baseline spring is 0.74. Low-speed spring blending is off.
Spring deadband0.04 Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Force gain0.25 The aerodynamic-load gain is 0.25 with an indicated-speed reference of 240 KIAS. The hydraulic-load factor of 0.35 scales that modeled term; it is a selected artificial-feel approximation.
Master gain0.85 Scales overall profile strength while preserving effect balance, subject to device and output limits.
Dynamic-pressure blendFalse Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Minimum spring factor0.55 Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring wake-up speed8 ktSets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring full-strength speed65 ktSets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Скорость настройки усилия240 ktSets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Airspeed spring stiffening0 The high-speed spring-stiffening gain is 0. No additional speed-driven stiffening is added; this does not disable independent aerodynamic loading.
Airspeed stiffening cap5 Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron force scale0.72 Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scale1 Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Maximum output force0.55 Caps directed-force output. Native spring effects and device limits remain separate.
StickFeel · Trim feel enabledFalse Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledFalse Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Elevator authority0 Pitch-trim setup is documented, but the profile's amount of trim-centre movement remains a selected approximation of powered-control feel. Pitch relief is off, with stored authority 0; roll authority is 0.
StickFeel · Aileron authority0 Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
StickFeel · Force trim enabledFalse Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledTrue Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledTrue Enables rate damping with the configured coefficients and control law.
Autopilot · Follow enabledFalse Autopilot following is off; the configured spring and load retain the hardware feel.
Autopilot · Follow authority0.1 Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot · Neutral hold enabledFalse Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.6 Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero · EnabledTrue Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Gain0 Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Aero · Gain0 Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Aero · Gain0 Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Aero · Max flap index3 Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index2 Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Gain0 Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Aero · Shaker enabledFalse Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Aero · Amplitude0.5 Sets triggered shaker strength; inactive while the shaker feature is disabled.
Ground · EnabledTrue Enables ground effects; each still needs its own strength and contact or motion telemetry.
Ground · Gain0.4 Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Ground · Gain0.25 Sets gear-bump texture during ground motion, separate from touchdown impact.
Ground · Gain0.65 Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Ground · Gain0 Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine · EnabledFalse Enables engine cues with nonzero settings and valid running-engine telemetry.
Engine · Gain0 Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Mechanical · EnabledTrue Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0.12 Sets texture from observed flap movement; a command without movement does not establish the cue.
Mechanical · Gain0.025 Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Открытые источники 11
  1. Airbus A310Research background · Wikipedia revision 1369233900 · retrieved 2026-09-12
  2. Cockpit and flight control familiesAirbus cockpit family descriptions; Airbus cockpit commonality, sidestick philosophy; Airbus cockpit commonality
  3. A310_MSFS_Manual v2Airbus A310-300
  4. Airbus A310-304-CremonaSoft-A310Product listing captured 2026-09-23; edition scope from the reviewed catalogue
  5. Microsoft Flight Simulator aircraft manuals
  6. MSFS 2024 FAQ and edition aircraft inventory
  7. MSFS 2020 FAQ and edition aircraft inventory
  8. Interview: flying the A310 Zero GDLR brochure, August 2015 imprint; PDF pp.11–12 / printed pp.20–23. Modified A310 Zero G; complete interview read.
  9. Interview with an Interflug pilotTed Wende interview, Austrian Wings, 8 April 2018. Retrospective A310 conversion and Interflug career account; full interview read.
  10. Interview with Lufthansa captain Cordula PflaumaeroTELEGRAPH interview, 14 April 2024. A310 Kathmandu recollection within a mixed-fleet career interview; full text read.
  11. ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03

Сообщество и исправления

Если ваш опыт полетов на этом типе говорит о том, что на странице что-то не так, исправьте это здесь.

Исправления от пилотов

Летаете на этом воздушном судне? Исправьте эту страницу.

Эта страница составлена по цитируемым источникам, но реальный опыт полетов на этом типе важнее любой цитаты. Процитируйте утверждение, которое кажется вам ошибочным, и расскажите, как ведет себя настоящее воздушное судно. Исправления направляются сопровождающему проекта на проверку и учитываются в следующей редакции этого исследования.

Разговоры в ангаре

Открытое обсуждение полетов и настройки Airbus A310-300 на форуме сообщества. Исправления выше конфиденциально отправляются сопровождающему проекта, а разговоры в ангаре публичны.

Разговоров в ангаре о Airbus A310-300 пока нет. Станьте первым.

Сообщество

Профили сообщества для этого воздушного судна

Для этого воздушного судна пока нет профилей сообщества. Настроили по-своему? Поделитесь профилем — и он появится здесь.