ATR 42-600 / 72-600Alan Wilson from Peterborough, Cambs, UK · CC BY-SA 2.0 · ATR 72-600 of Binter Canarias

ATR 42-600 / 72-600

A high-wing regional transport family powered by two turboprops.
AirlinerВариантов профиля: 2

Знакомство с воздушным судном

The ATR 72 grew from the smaller ATR 42 into a longer regional transport. Its cabin sits below a straight high wing, with a turboprop on each side and a T-tail behind. Cargo and maritime-patrol versions also use the airframe.

The 42 and 72 share a family identity but differ in size and capacity. The -600 variants have a later flight deck than early ATRs, with equipment described in their respective developer manuals.

Aircraft / family

Propulsion
Twin turboprop↗
Configuration
High wing · T-tail↗

Подробнее об этом воздушном судне на AirframeDB

A light-twin pilot joins an acceptance flight

Von Croy joined ATR test pilot Eric Delesalle for a two-hour acceptance flight in an ATR 72-500. Coming from private flying with a multiengine rating, he was surprised by how manageable the much larger aircraft felt while taxiing. Its acceleration and climb made a stronger impression after takeoff, although the aircraft carried a light load. Along the Pyrenees, his early attempts at hand-flying involved excessive control and trim inputs before he became more accustomed to its response.

Delesalle handled the systems while von Croy concentrated on flying and simple navigation. Returning to Toulouse, the test pilot also managed configuration and power. Von Croy began the flare too high, then held the nose up until the main wheels touched; the nosewheel followed less gently than he intended. He stresses the difference between that supervised demonstration and mastering airline procedures and crew coordination. The experience concerns the earlier 72-500, before the 600-series flight deck.

A quiet cockpit and a difficult moment to speak up

Joy recalls flying the ATR as a first officer with about a year on the type. A newly upgraded captain initially made the trip pleasant, but became withdrawn and defensive after a poor crosswind landing. By their fourth day together, the atmosphere had made routine questions uncomfortable. Approaching St. Louis, a controller mistook their ATR for a smaller aircraft and offered a sidestep to a runway Joy believed their airline did not permit it to use.

The captain insisted they accept. Joy hesitated, caught between his own experience on the aircraft and the other pilot's rank and confidence. Before he resolved that conflict, the controller identified the ATR and restored their clearance to the longer runway. Joy's lasting memory is his disappointment at not asserting himself. The episode changed how seriously he regarded crew-resource-management training and, later, how he wanted colleagues to question him. It is a personal crew-coordination account; the article does not identify the ATR subvariant.

The ATR chapter of a career she later reclaimed

McWhirter's first airline job began in the training department at Continental Express. After fulfilling a commitment of more than two years, she moved to full-time line flying on the ATR 42. Based in Newark, she flew throughout the northeastern United States and remembers the valuable winter-operating experience those routes provided.

She expected to upgrade to ATR captain in November 2001. The changes following September 11 accelerated the airline's move toward jets, and she chose to transition to the Embraer 145 as a first officer. She later left airline flying to raise her children, continued to miss the cockpit, and began a return with her family's support.

Открытые источники 8
  1. ATR 72Research background · Wikipedia revision 1373470656 · retrieved 2026-09-12
  2. Microsoft Flight Simulator aircraft manuals
  3. MSFS 2024 FAQ and edition aircraft inventory
  4. Expert Series 01: ATR 42-600 / 72-600 Expansion2024-10-10 · release and package scope
  5. Perfect go-around: A flying visit to the ATR flight test departmentAlexis von Croy · Issue 1, 2007, page 10
  6. Crew Members Need To Speak Up In The CockpitDustin Joy · 26 June 2018
  7. Reclaiming A DreamErin McWhirter · 7 January 2022
  8. ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03

Как профиль это моделирует

ATR 72-600

Free + Pro
MSFS 2020MSFS 2024

The ATR 72 grew from the smaller ATR 42 into a longer regional transport. Its cabin sits below a straight high wing, with a turboprop on each side and a T-tail behind. Passenger services are only part of its story: cargo and maritime-patrol versions also use the airframe.

This starting point selects ATR 72-600. Its aircraft-level settings do not select a particular developer’s custom systems.

Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.

Valid trim provides the configured pressure relief. Autopilot following is enabled for supported control references.

Controls and trim

The selected ATR 42-600 and 72-600 belong to the same regional turboprop family but retain different airframes and equipment scope. The preserved technical datasheet is specifically for the 72-600, while Microsoft's simulator announcement names the included variants. Its climb figures use calibrated airspeed and its cruise figures true airspeed, so neither directly defines the profile's indicated-speed feel reference.

ATR 72-600 manufacturer data sheet

About the values

The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.

Общее усиление и система управления

Master gain85%

Итоговый общий масштаб вывода, применяемый ко всему, что выдает модель, до ограничения устройства.

Больше: все (пружина, нагрузки, эффекты) одновременно усиливается.

Меньше: все одновременно становится мягче.

Почему так: Scales overall profile strength while preserving effect balance, subject to device and output limits.

Усилия

Spring strength74%

Базовое центрирующее усилие, которое возвращает джойстик в центр. Все остальные усилия накладываются на него. Слишком низкое — и джойстик кажется вялым в обычном полете; слишком высокое — и он сопротивляется руке и заглушает более слабые эффекты, наложенные поверх.

Больше: более жесткое центрирование, постоянно сопротивляющееся руке.

Меньше: более вялый джойстик, опирающийся только на аэродинамическую нагрузку.

Почему так: The selected yoke response is nominal. The 72-600 engine datasheet is not a measurement of primary-control forces for both ATR variants. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 90 KIAS.

ATR 72-600 manufacturer data sheet
Spring deadband5%

Небольшая нейтральная зона вокруг центра, в которой пружина не действует, чтобы мелкие движения в покое не вызывали дребезга. Шире — спокойнее, но свободнее; уже — точнее, но джойстик может подергиваться около центра.

Больше: более спокойный, но более свободный центр с большим люфтом.

Меньше: более плотный центр, который может дребезжать в покое.

Почему так: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.

Overall aerodynamic load68%

Общий множитель для обеих постоянных нагрузок по осям, применяемый до их независимой балансировки. Обычно профили его не трогают и вместо этого настраивают нагрузки двух осей.

Больше: обе оси нагружаются сильнее.

Меньше: обе оси одновременно становятся легче.

Почему так: The aerodynamic-load gain is 0.68 with an indicated-speed reference of 210 KIAS. This supplies speed-dependent loading alongside the spring.

Airspeed blendingTrue

Включает окно нарастания пружины на малой скорости (начальная и полная скорость в узлах, см. выше). Если выключено, пружина постоянна на всех скоростях.

Почему так: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.

Low-speed spring floor55%

Какая доля пружины сохраняется на стоянке, пока скорость еще не создала никакого аэродинамического усилия. Высокий минимум оставляет джойстик на стоянке упругим; низкий дает свободные ощущения провисших тросов, как у легкого самолета на стоянке.

Больше: более упругий джойстик на стоянке и при рулении.

Меньше: более свободно болтающийся джойстик на стоянке, который оживает только с ростом скорости.

Почему так: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.

Spring engagement start20 kt

Скорость, на которой пружина начинает расти от минимума на малой скорости к полной силе: органы управления «оживают» на разбеге.

Почему так: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.

Spring engagement full90 kt

Скорость, на которой пружина достигает полной силы. Между начальной скоростью и этой точкой центрирование постепенно становится жестче по мере усиления обтекания рулей.

Почему так: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.

Скорость настройки усилия210

Приборная скорость, на которой аэродинамическая нагрузка достигает расчетного полного уровня. Она привязывает всю кривую нагрузки к реальному диапазону скоростей воздушного судна: у 172 нагрузка набирается к 110 узлам, у реактивного самолета — намного позже.

Больше: нагрузки приходят позже; джойстик остается легким до более высокой скорости.

Меньше: нагрузки приходят раньше, и в крейсерском полете управление тяжелее.

Почему так: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.

Centre firmness vs speed10%

Насколько само центрирование становится жестче со скоростью, в дополнение к нагрузкам от отклонения. Ноль сохраняет ощущения в центре постоянными; большее значение делает центр джойстика жестче в крейсерском полете и мягче при полете по кругу.

Больше: центр заметно становится жестче с ростом скорости.

Меньше: постоянные ощущения в центре на любой скорости.

Почему так: The high-speed spring-stiffening gain is 0.1. It strengthens the permitted spring response above 90 KIAS, with the squared-speed ratio capped at 5.

Centre stiffening cap5

Верхний предел скоростного ужесточения центра, чтобы очень быстрый полет не мог затягивать пружину без ограничений.

Больше: на большой скорости допускается большее общее ужесточение.

Меньше: ужесточение ограничивается раньше.

Почему так: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.

Aileron load72%

Постоянная нагрузка по крену от отклонения элеронов и скорости, балансируемая независимо от тангажа. Вместе с нагрузкой руля высоты она задает соотношение усилий по осям (гармонию управления), о котором пишут обозреватели.

Больше: более тяжелые усилия по крену.

Меньше: более легкие элероны, которые кажутся более быстрыми.

Почему так: Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.

Elevator load100%

Постоянная нагрузка по тангажу от отклонения руля высоты и скорости, балансируемая независимо от крена. Это главный регулятор тяжести тангажа у данного типа. Он не затрагивает усилия элеронов, пружины, триммера и бафтинга.

Больше: более тяжелые постоянные усилия по тангажу на скорости.

Меньше: более легкий руль высоты, который требует меньше сил для удержания.

Почему так: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.

Max output force55%

Ограничение каждого постоянного усилия по тангажу или крену до того, как оно дойдет до устройства; защищает оборудование от ударов и насыщения при энергичных маневрах.

Больше: более сильные пиковые постоянные усилия до срезания.

Меньше: более мягкий предел; при резких маневрах усилие раньше перестает расти.

Почему так: Caps directed-force output. Native spring effects and device limits remain separate.

Триммер

Trim relief (elevator)30%

Насколько сильно триммер руля высоты снимает удерживаемое усилие по тангажу и смещает положение, в котором устанавливается джойстик. При 100% правильно оттриммированное воздушное судно не требует удерживающего давления — как в реальном полете, где нагрузку снимают триммером.

Больше: триммер снимает большую часть удерживаемого усилия по тангажу; при 100% полное триммирование сводит его к нулю.

Меньше: даже после триммирования приходится удерживать усилие.

Почему так: The selected pitch-trim relief is a software approximation; the acquired technical overview does not quantify trim-driven hardware movement. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.14.

ATR 72-600 manufacturer data sheet
Trim relief (aileron)14%

Такая же разгрузка для триммера крена. У большинства типов авиации общего назначения нет настоящего триммера элеронов, поэтому здесь остается ноль; типы с триммером крена получают соответствующее значение.

Больше: триммер крена снимает больше удерживаемого усилия по крену.

Меньше: триммер крена действует слабее.

Почему так: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.

Усиление эффектов · Земля

Runway rumble42%

Вибрация при качении по поверхности в зависимости от скорости колес и типа покрытия: асфальт, трава или гравий под шасси.

Больше: более выраженная фактура покрытия в джойстике.

Меньше: более плавное руление.

Почему так: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.

Gear bumps32%

Короткие отдельные толчки от деформационных швов, колеи и неровного покрытия, прерывающие непрерывную тряску.

Больше: более резкие удары от стыков и колеи.

Меньше: более мягкие детали покрытия.

Почему так: Sets gear-bump texture during ground motion, separate from touchdown impact.

Усиление эффектов · Планер

Stall buffet28%

Тряска планера при приближении к сваливанию и пока активна сигнализация сваливания: насколько громко это крыло сообщает, что ему плохо. Типы с четким сваливанием получают умеренный бафтинг и оставляют предупреждение звуковой сирене.

Больше: более сильная тряска перед сваливанием.

Меньше: более спокойное крыло; предупреждает звуковая сирена.

Почему так: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.

Mach buffet0%

Трансзвуковой бафтинг при приближении к ограничению по числу М. Имеет смысл для реактивных самолетов вблизи MMO; ноль для поршневых и турбовинтовых, которые туда никогда не добираются.

Больше: более сильный трансзвуковой бафтинг вблизи ограничения по числу М.

Меньше: более плавный полет на больших числах М.

Почему так: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.

Flap buffet14%

Низкочастотная вибрация планера при выпущенных в поток закрылках, в том диапазоне скоростей, где они действительно работают в потоке.

Больше: более тряский полет, когда закрылки работают в потоке.

Меньше: более плавный заход с выпущенными закрылками.

Почему так: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.

Gear buffet10%

Дробная вибрация планера от выпущенного в поток убираемого шасси. Ноль для типов с неубираемым шасси, у которых форма планера никогда не меняется.

Больше: сильнее дробная вибрация с выпущенными колесами.

Меньше: более чистый полет с выпущенным шасси.

Почему так: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.

Stick shaker50%

Отдельное дрожание вибратора штурвала при сваливании, запускаемое собственной системой предупреждения о сваливании воздушного судна. Значение получают только типы с настоящим вибратором штурвала; все остальные полагаются на аэродинамический бафтинг и звуковую сирену.

Больше: более сильное дрожание вибратора штурвала.

Меньше: более слабый вибратор штурвала.

Почему так: Sets triggered shaker strength; inactive while the shaker feature is disabled.

Усиление эффектов · Двигатель, механика и сопротивление

Touchdown thump82%

Разовый толчок при касании колесами ВПП, зависящий от вертикальной скорости снижения: мягкая посадка едва ощутима, жесткая отдается ударом.

Больше: более сильный толчок при касании.

Меньше: более мягкие посадки.

Почему так: Sets landing-impact strength; landing telemetry and response shape determine the pulse.

Reverse rumble48%

Вибрация на пробеге при работе реверса тяги или винтов в бета-режиме. Ноль для типов без реверса.

Больше: более тряский пробег на реверсе.

Меньше: более тихий реверс.

Почему так: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.

Engine rumble6%

Непрерывная вибрация силовой установки, следующая за оборотами от малого газа до полной мощности, — постоянное напоминание о том, что впереди что-то сжигает топливо.

Больше: двигатель сильнее ощущается в джойстике.

Меньше: более тихая силовая установка.

Почему так: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.

Flap motion12%

Непрерывная вибрация, только пока симулятор сообщает, что закрылки действительно движутся. Она следует за реальным движением приводов и отказами, а не за расчетным таймером.

Больше: сильнее вибрация, пока закрылки движутся.

Меньше: более тихое движение закрылков.

Почему так: Sets texture from observed flap movement; a command without movement does not establish the cue.

Следование за автопилотом

AP follow authority10%

Насколько далеко команды автопилота могут физически перемещать джойстик. В MSFS значение минимально, потому что смещенная ось может считываться обратно как ввод пилота; ноль полностью отключает следование.

Больше: автопилот заметно дальше отклоняет ваш джойстик.

Меньше: едва ощутимое следование.

Почему так: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.

Stick feel

StickFeel · Trim feel enabledTrue

Whether this feature is active in this profile.

Почему так: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.

StickFeel · Trim relief enabledTrue

Whether this feature is active in this profile.

Почему так: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.

StickFeel · Force trim enabledFalse

Whether this feature is active in this profile.

Почему так: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.

StickFeel · G load enabledTrue

Whether this feature is active in this profile.

Почему так: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.

StickFeel · Rate damping enabledTrue

Whether this feature is active in this profile.

Почему так: Enables rate damping with the configured coefficients and control law.

Autopilot

Autopilot · Follow enabledTrue

Whether this feature is active in this profile.

Почему так: Following is on at 0.1 authority when a supported, valid autopilot control reference is available.

Autopilot · Neutral hold enabledFalse

Whether this feature is active in this profile.

Почему так: Permits centering hold during a supported AP state, separate from following a moving target.

Autopilot · Neutral hold strength0.6

Почему так: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.

Aero

Aero · EnabledTrue

Whether this feature is active in this profile.

Почему так: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.

Aero · Max flap index2

Where this effect reaches full strength (or has fully faded, for washouts).

Больше: a more gradual build to a later peak.

Меньше: a quicker build.

Почему так: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.

Aero · Min flap index2

Where this effect begins fading in.

Больше: the effect begins later.

Меньше: it begins earlier.

Почему так: Sets the first flap detent that admits buffet; this is a handle index, not degrees.

Aero · Shaker enabledFalse

Whether this feature is active in this profile.

Почему так: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.

Ground

Ground · EnabledTrue

Whether this feature is active in this profile.

Почему так: Enables ground effects; each still needs its own strength and contact or motion telemetry.

Engine

Engine · EnabledTrue

Whether this feature is active in this profile.

Почему так: Enables engine cues with nonzero settings and valid running-engine telemetry.

Mechanical

Mechanical · EnabledTrue

Whether this feature is active in this profile.

Почему так: Enables accessory cues with configured strengths and observed accessory movement.

Mechanical · Gain0.12

The strength of this effect.

Больше: a stronger effect.

Меньше: a weaker one.

Почему так: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.

Все настройки профиля
Оценочные настройки профиля
ПараметрЗначениеЧто регулирует и почему
Spring strength0.74 The selected yoke response is nominal. The 72-600 engine datasheet is not a measurement of primary-control forces for both ATR variants. The baseline spring is 0.74. Its low-speed blend reaches baseline strength at 90 KIAS.
Spring deadband0.05 Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Force gain0.68 The aerodynamic-load gain is 0.68 with an indicated-speed reference of 210 KIAS. This supplies speed-dependent loading alongside the spring.
Master gain0.85 Scales overall profile strength while preserving effect balance, subject to device and output limits.
Dynamic-pressure blendTrue Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Minimum spring factor0.55 Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring wake-up speed20 ktSets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring full-strength speed90 ktSets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Скорость настройки усилия210.0 ktSets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Airspeed spring stiffening0.1 The high-speed spring-stiffening gain is 0.1. It strengthens the permitted spring response above 90 KIAS, with the squared-speed ratio capped at 5.
Airspeed stiffening cap5 Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron force scale0.72 Roll and pitch aerodynamic scales are 0.72 and 1, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scale1.0 Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Maximum output force0.55 Caps directed-force output. Native spring effects and device limits remain separate.
StickFeel · Trim feel enabledTrue Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledTrue Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Elevator authority0.3 The selected pitch-trim relief is a software approximation; the acquired technical overview does not quantify trim-driven hardware movement. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.14.
StickFeel · Aileron authority0.14 Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
StickFeel · Force trim enabledFalse Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledTrue Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledTrue Enables rate damping with the configured coefficients and control law.
Autopilot · Follow enabledTrue Following is on at 0.1 authority when a supported, valid autopilot control reference is available.
Autopilot · Follow authority0.1 Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot · Neutral hold enabledFalse Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.6 Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero · EnabledTrue Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Gain0.28 Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Aero · Gain0 Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Aero · Gain0.14 Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Aero · Max flap index2 Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index2 Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Gain0.1 Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Aero · Shaker enabledFalse Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Aero · Amplitude0.5 Sets triggered shaker strength; inactive while the shaker feature is disabled.
Ground · EnabledTrue Enables ground effects; each still needs its own strength and contact or motion telemetry.
Ground · Gain0.42 Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Ground · Gain0.32 Sets gear-bump texture during ground motion, separate from touchdown impact.
Ground · Gain0.82 Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Ground · Gain0.48 Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine · EnabledTrue Enables engine cues with nonzero settings and valid running-engine telemetry.
Engine · Gain0.06 Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Mechanical · EnabledTrue Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0.12 Sets texture from observed flap movement; a command without movement does not establish the cue.
Mechanical · Gain0.12 Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Открытые источники 9
  1. ATR 72Research background · Wikipedia revision 1373470656 · retrieved 2026-09-12
  2. ATR 72-600 manufacturer data sheetATR 42-600 / 72-600
  3. Microsoft Flight Simulator aircraft manuals
  4. MSFS 2024 FAQ and edition aircraft inventory
  5. Expert Series 01: ATR 42-600 / 72-600 Expansion2024-10-10 · release and package scope
  6. Perfect go-around: A flying visit to the ATR flight test departmentAlexis von Croy · Issue 1, 2007, page 10
  7. Crew Members Need To Speak Up In The CockpitDustin Joy · 26 June 2018
  8. Reclaiming A DreamErin McWhirter · 7 January 2022
  9. ICAO Doc 8643 — aircraft type designatorsPublic search data retrieved 2026-09-14; authority update 2026-09-03

Сообщество и исправления

Если ваш опыт полетов на этом типе говорит о том, что на странице что-то не так, исправьте это здесь.

Исправления от пилотов

Летаете на этом воздушном судне? Исправьте эту страницу.

Эта страница составлена по цитируемым источникам, но реальный опыт полетов на этом типе важнее любой цитаты. Процитируйте утверждение, которое кажется вам ошибочным, и расскажите, как ведет себя настоящее воздушное судно. Исправления направляются сопровождающему проекта на проверку и учитываются в следующей редакции этого исследования.

Разговоры в ангаре

Открытое обсуждение полетов и настройки ATR 42-600 / 72-600 на форуме сообщества. Исправления выше конфиденциально отправляются сопровождающему проекта, а разговоры в ангаре публичны.

Разговоров в ангаре о ATR 42-600 / 72-600 пока нет. Станьте первым.

Сообщество

Профили сообщества для этого воздушного судна

Для этого воздушного судна пока нет профилей сообщества. Настроили по-своему? Поделитесь профилем — и он появится здесь.