FlugzeugbibliothekDG Aviation DG-1001E
DG Aviation DG-1001EAlf van Beem · CC0 · DG-1000 PH-1432 at Hilversum; a related member of the family, rather than a DG-1001E installation.

DG Aviation DG-1001E

A tandem two-seat sailplane family used for training and cross-country soaring.
Glider1 Profiloptionen

Kenne das Flugzeug

The DG-1000 first flew in 2000. Its long wings and T-tail surround a two-seat cockpit, with developments offering different spans and launch arrangements. The DG-1001 continued the line with further refinements.

The DG-1001E adds a Front Electric Sustainer: a nose-mounted electric motor with folding propeller blades. DG describes it as a way to continue a soaring flight when lift becomes scarce. The electric motor sustains flight but does not provide self-launching capability.

Represented aircraft

Propulsion
Front Electric Sustainer↗
Configuration
Tandem two-seat sailplane · Folding nose propeller↗

DG Flugzeugbau DG-1000 · Specifications (DG1000T) · real aircraft; source units retained

Length
8.57 m (28 ft 1 in)↗
Wingspan
18 m (59 ft 1 in) with 20m option available↗
Height
1.6 m (5 ft 3 in)↗
Wing area
17.5 m² (188 sq ft)↗
Empty weight
461 kg (1,016 lb)↗
Max takeoff weight
750 kg (1,653 lb)↗
Propellers
2-bladed DG fixed-pitch propeller↗
Maximum speed
270 km/h (170 mph, 150 kn)↗
Cruise speed
111 km/h (69 mph, 60 kn)↗
Stall speed
68 km/h (42 mph, 37 kn) with 20m extension↗

Mehr über dieses Flugzeug auf AirframeDB

Helping a new Academy fleet take its first steps

An invitation from Chris Klix brought Kasprzyk into the introduction of the Air Force Academy’s new gliders. At Edwards, he helped assemble the first aircraft and familiarise an experienced group of pilots with it. The acceptance flight with Jason Schott was followed by a busy programme of checkouts, fitted around increasingly gusty desert weather.

The final trainee’s flights left time to circle in thermals and enjoy the view over Edwards. For Kasprzyk, the work also offered the pleasure of flying in historic airspace and meeting the people who would teach in the new fleet. A later Academy visit with his wife Mary let him see more of those aircraft in their new home.

Finding a trainer that still makes a summer flight enjoyable

A hot, humid day at Bruchsal gave Marzinzik a practical introduction to the updated Club. Its low cockpit made getting aboard easy, and the large wheel softened the uneven grass during takeoff. In the air, he appreciated the quiet cockpit and ventilation as much as the aircraft’s response to a rising pocket of warm air.

Circling became an enjoyable exercise in following the lift through the wing’s feedback and small control adjustments. A second flight with shorter tips and a different balance explored a more demanding aerobatic configuration. His report describes a trainer with room to grow into cross-country and aerobatic work, while keeping those two tested configurations distinct.

A difficult thermal day within a welcoming week

At Narrogin’s Women in Gliding week, Becker flew the visiting DG1001 with coach Ailsa McMillan. They set out with a modest cross-country task in mind, but an hour of working weak, choppy thermals near the airfield persuaded them to abandon it and land. Becker still remembered the aircraft with affection.

That flight belonged to a week built around encouragement and shared goals. Visiting pilots helped others regain confidence, while volunteers prepared gliders, meals and accommodation. Even bright pink nail varnish became a way to break the ice on the opening evening.

Öffentliche Quellen 9
  1. DG Flugzeugbau DG-1000Research background · Wikipedia revision 1366770132 · retrieved 2026-09-12
  2. Microsoft Flight Simulator aircraft manuals
  3. MSFS 2024 FAQ and edition aircraft inventory
  4. MSFS 2020 FAQ and edition aircraft inventory
  5. DG1001E — The Smart Way HomeManufacturer description checked 2026-09-12; identifies the FES as a sustainer system.
  6. Flying the USAF Academy DG-1001 - Jun 2011Stan Kasprzyk · May 2011 acceptance and checkout flights
  7. Pilot Report: DG-1001 Club WLGerhard Marzinzik · 19 August 2016
  8. Women in Gliding Western AustraliaRobyn Becker · issue 34, February–March 2017, printed pages 10–11
  9. ICAO — special designatorsGlider and motorglider categories; checked 2026-09-14

Wie das Profil es modelliert

DG Aviation DG-1001E

Free + Pro
MSFS 2024MSFS 2020

The DG-1000 first flew in 2000. Its long wings and T-tail surround a two-seat cockpit, with developments offering different spans and launch arrangements. The DG-1001 continued the line with further refinements.

This starting point selects DG Aviation DG-1001E. Its aircraft-level settings do not select a particular developer’s custom systems.

The spring supplies the glider’s selected stick resistance. Spring resistance builds with the selected airspeed response. A separate aerodynamic term adds speed-dependent control load.

Pitch relief is configured separately from electric-sustainer operation. Valid trim provides the configured pressure relief. Autopilot following is off.

Controls and trim

The two-seat DG-1001E adds a nose-mounted Front Electric Sustainer to the DG-1000/1001 glider line. Folding propeller blades, battery indications and motor controls extend a soaring flight when lift is scarce. The manufacturer distinguishes sustainer use from self-launching.

DG Aviation DG1001E

About the values

The gains are normalized profile settings. They describe the chosen effect balance; hand force depends on the device and its output limits. IAS references are tuning values rather than operating limits. Physical acceptance of this revision remains pending.

Master gain & control system

Master gain85%

Die letzte Gesamtskalierung über alles, was das Modell erzeugt, vor der Gerätegrenze.

Mehr: alles (Feder, Lasten, Effekte) wird gemeinsam stärker.

Weniger: alles wird gemeinsam weicher.

Warum hier: Scales overall profile strength while preserving effect balance, subject to device and output limits.

Forces

Spring strength64%

Die Grundzentrierkraft, die den Stick zur Mitte zieht. Jede andere Kraft baut darauf auf. Zu niedrig fühlt sich der Stick im Normalflug schlaff an; zu hoch kämpft er gegen deine Hand und überdeckt die feineren Signale.

Mehr: festere Zentrierung, die der Hand jederzeit mehr widersteht.

Weniger: ein schlafferer Stick, der sich allein auf die aerodynamische Last stützt.

Warum hier: The spring supplies the glider’s selected stick resistance. The baseline spring is 0.64. Its low-speed blend reaches baseline strength at 32.5 KIAS.

DG Aviation DG1001E
Spring deadband4%

Eine kleine neutrale Zone um die Mitte, in der die Feder ruhig bleibt, damit kleinste Bewegungen im Stand nicht flattern. Breiter ist ruhiger, aber lockerer; enger ist präziser, kann aber um die Mitte zittern.

Mehr: eine ruhigere, aber lockerere Mitte mit mehr Spiel.

Weniger: eine straffere Mitte, die in Ruhe zittern kann.

Warum hier: Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.

Overall aerodynamic load100%

Ein Gesamtmaß über beide anhaltenden Achslasten, vor ihrer Einzelbalance angewendet. Profile lassen es normalerweise stehen und stimmen die beiden Achslasten ab.

Mehr: beide Achsen laden härter auf.

Weniger: beide Achsen werden gemeinsam leichter.

Warum hier: The aerodynamic-load gain is 1 with an indicated-speed reference of 65 KIAS. This supplies speed-dependent loading alongside the spring.

Airspeed blendingTrue

Aktiviert das Niedrigfahrt-Einblendfenster der Feder (Beginn/Voll in Knoten oben). Aus bleibt die Feder bei jeder Fahrt konstant.

Warum hier: Allows baseline spring strength to rise with indicated airspeed where the control law permits it.

Low-speed spring floor40%

Wie viel Feder im Stillstand übrig bleibt, bevor Fahrt überhaupt aerodynamische Kraft aufbauen kann. Ein hoher Sockel hält den geparkten Stick straff; ein niedriger ergibt das lose Seilzuggefühl eines geparkten Leichtflugzeugs.

Mehr: ein festerer Stick beim Parken und Rollen.

Weniger: ein schlaffer geparkter Stick, der erst mit Fahrt aufwacht.

Warum hier: Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.

Spring engagement start9.1 kt

Die Fahrt, ab der die Feder vom Niedrigfahrt-Sockel Richtung volle Stärke steigt: der Beginn des "Lebendigwerdens" der Ruder im Startlauf.

Warum hier: Sets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.

Spring engagement full32.5 kt

Die Fahrt, bei der die Feder volle Stärke erreicht. Zwischen Beginn und diesem Punkt strafft sich die Zentrierung zunehmend mit der Anströmung.

Warum hier: Sets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.

Geschwindigkeit zur Kraftabstimmung65

Die angezeigte Fahrt, bei der die aerodynamische Last ihr ausgelegtes Vollniveau erreicht. Sie verankert die gesamte Lastkurve am realen Geschwindigkeitsbereich: eine 172 lädt bis 110 Knoten auf, ein Jet viel später.

Mehr: Lasten kommen später; der Stick bleibt bis zu höherer Fahrt leicht.

Weniger: Lasten kommen früher, und die Reise fühlt sich schwerer an.

Warum hier: Sets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.

Centre firmness vs speed30%

Wie stark sich die Zentrierung selbst mit der Fahrt strafft, zusätzlich zu den Ausschlaglasten. Null hält das Mittengefühl konstant; mehr lässt den Stick im Reiseflug härter und im Anflug lockerer zentrieren.

Mehr: eine Mitte, die mit Fahrt spürbar härter wird.

Weniger: konstantes Mittengefühl bei jeder Fahrt.

Warum hier: The high-speed spring-stiffening gain is 0.3. It strengthens the permitted spring response above 32.5 KIAS, with the squared-speed ratio capped at 5.

Centre stiffening cap5

Die Obergrenze der fahrtabhängigen Mittenstraffung, damit sehr hohe Fahrt die Feder nicht grenzenlos aufzieht.

Mehr: mehr Gesamtstraffung bei hoher Fahrt erlaubt.

Weniger: die Straffung klemmt früher ab.

Warum hier: Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.

Aileron load60%

Die anhaltende Rolllast aus Querruderausschlag und Fahrt, unabhängig vom Nick balanciert. Zusammen mit der Höhenruderlast bestimmt sie die Ruderharmonie, von der Testberichte sprechen.

Mehr: schwerere Rollkräfte.

Weniger: leichtere, quirligere Querruder.

Warum hier: Roll and pitch aerodynamic scales are 0.6 and 0.78, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.

Elevator load78%

Die anhaltende Nicklast aus Höhenruderausschlag und Fahrt, unabhängig von der Rollachse balanciert. Der Haupthebel für das Nickgewicht eines Musters. Er verändert weder Querruder, Feder, Trimmung noch Schüttelkräfte.

Mehr: schwerere anhaltende Nickkräfte bei Fahrt.

Weniger: ein leichteres Höhenruder, das weniger Muskel braucht.

Warum hier: Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.

Max output force55%

Eine Kappe je stetiger Nick- oder Rollkraft vor dem Gerät. Der Schutz davor, die Hardware in harten Manövern zu überfahren oder zu sättigen.

Mehr: stärkere Spitzenkräfte vor dem Abschneiden.

Weniger: eine sanftere Decke; harte Manöver flachen früher ab.

Warum hier: Caps directed-force output. Native spring effects and device limits remain separate.

Trim

Trim relief (elevator)30%

Wie stark Höhenrudertrimmung die gehaltene Nickkraft abbaut und den Ruhepunkt des Sticks verschiebt. Bei 100 % braucht ein sauber getrimmtes Flugzeug keinen gehaltenen Druck: das Wegtrimmen der Last wie im echten Fliegen.

Mehr: Trimmung nimmt mehr der gehaltenen Nickkraft; bei 100 % nullt volle Trimmung sie.

Weniger: du hältst auch getrimmt weiter Kraft.

Warum hier: Pitch relief is configured separately from electric-sustainer operation. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.1.

DG Aviation DG1001E
Trim relief (aileron)10%

Dieselbe Entlastung für Rolltrimmung. Die meisten GA-Muster haben keine echte Querrudertrimmung, daher bleibt sie bei null; Muster mit Rolltrimmung bekommen einen passenden Wert.

Mehr: Rolltrimmung nimmt mehr gehaltene Rollkraft.

Weniger: Rolltrimmung bewirkt weniger.

Warum hier: Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.

Effect gains · Ground

Runway rumble30%

Rollende Untergrundvibration aus Radgeschwindigkeit und Oberflächenart: die Textur von Asphalt, Gras oder Schotter unter dem Fahrwerk.

Mehr: lautere Oberflächentextur durch den Stick.

Weniger: ruhigeres Rollen.

Warum hier: Sets rolling texture strength, modified by speed, surface and undercarriage configuration.

Gear bumps30%

Kurze einzelne Stöße von Dehnfugen, Spurrillen und rauem Belag: die Interpunktion über dem kontinuierlichen Rumpeln.

Mehr: schärfere Stöße von Fugen und Rillen.

Weniger: weichere Bodendetails.

Warum hier: Sets gear-bump texture during ground motion, separate from touchdown impact.

Effect gains · Airframe

Stall buffet40%

Zellenschütteln vor dem Überziehen und bei aktiver Überziehwarnung: wie laut diese Fläche ihr Unbehagen ankündigt. Muster mit sauberem Abriss bekommen moderates Schütteln, das Horn trägt die Warnung.

Mehr: lauteres Schütteln vor dem Überziehen.

Weniger: eine leisere Fläche; das Horn trägt die Warnung.

Warum hier: Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.

Mach buffet0%

Transsonisches Schütteln nahe der Machgrenze. Relevant für Jets nahe MMO, null für Kolben und Turboprops, die nie dort ankommen.

Mehr: stärkeres transsonisches Schütteln nahe der Machgrenze.

Weniger: ruhigerer Flug bei hohem Mach.

Warum hier: Sets high-Mach buffet strength; onset and full-strength thresholds are separate.

Flap buffet0%

Niederfrequente Zellenvibration mit Klappen im Fahrtwind, im Fenster, in dem sie wirklich Luft arbeiten.

Mehr: ein rauerer Lauf mit arbeitenden Klappen.

Weniger: ruhigere Anflugklappen.

Warum hier: Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.

Gear buffet10%

Zellentrommeln vom ausgefahrenen Einziehfahrwerk im Fahrtwind. Null für Festfahrwerke, deren Zelle nie die Form ändert.

Mehr: mehr Trommeln mit hängendem Fahrwerk.

Weniger: saubererer Flug mit Fahrwerk.

Warum hier: Sets gear aerodynamic buffet; movement and ground-contact cues are separate.

Stick shaker50%

Der dedizierte Stall-Stickshaker-Buzz, ausgelöst von der Überziehwarnanlage des Flugzeugs. Nur Muster mit echtem Shaker bekommen einen Wert; alle anderen verlassen sich auf Schütteln und Horn.

Mehr: ein härterer Shaker-Buzz.

Weniger: ein dezenterer Shaker.

Warum hier: Sets triggered shaker strength; inactive while the shaker feature is disabled.

Effect gains · Engine, mechanical & drag

Touchdown thump50%

Der Einmalstoß beim Aufsetzen, skaliert mit der Sinkrate: ein Butterlander flüstert, ein fester Aufsetzer wummst.

Mehr: ein härterer Tritt beim Aufsetzen.

Weniger: weichere Ankünfte.

Warum hier: Sets landing-impact strength; landing telemetry and response shape determine the pulse.

Reverse rumble0%

Ausrollvibration bei Schubumkehr oder Beta-Verstellung. Null für Muster ohne Umkehr.

Mehr: ein rauerer Ausrollvorgang unter Umkehrschub.

Weniger: leisere Umkehr.

Warum hier: Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.

Engine rumble0%

Kontinuierliche Triebwerksvibration, die der Drehzahl von Leerlauf bis Volllast folgt: die allgegenwärtige Erinnerung, dass vorn etwas Kraftstoff verbrennt.

Mehr: mehr Triebwerk im Stick.

Weniger: ein leiseres Triebwerk.

Warum hier: Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.

Flap motion0%

Dauervibration nur, solange der Simulator tatsächlich fahrende Klappenflächen meldet. Folgt echter Aktuatorbewegung und Ausfällen, keinem geschätzten Timer.

Mehr: mehr Vibration bei fahrenden Klappen.

Weniger: leisere Klappenläufe.

Warum hier: Sets texture from observed flap movement; a command without movement does not establish the cue.

Autopilot follow

AP follow authority5%

Wie weit Autopilotbefehle den physischen Stick bewegen dürfen. In MSFS winzig gehalten, weil eine bewegte Achse als Pilotene ingabe zurückgelesen werden kann; null schaltet das Folgen ab.

Mehr: der Autopilot bewegt deinen Stick sichtbar weiter.

Weniger: ein kaum wahrnehmbares Folgen.

Warum hier: Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.

Stick feel

StickFeel · Trim feel enabledTrue

Whether this feature is active in this profile.

Warum hier: Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.

StickFeel · Trim relief enabledTrue

Whether this feature is active in this profile.

Warum hier: Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.

StickFeel · Force trim enabledFalse

Whether this feature is active in this profile.

Warum hier: Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.

StickFeel · G load enabledTrue

Whether this feature is active in this profile.

Warum hier: Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.

StickFeel · Rate damping enabledTrue

Whether this feature is active in this profile.

Warum hier: Enables rate damping with the configured coefficients and control law.

Autopilot

Autopilot · Follow enabledFalse

Whether this feature is active in this profile.

Warum hier: Autopilot following is off; the configured spring and load retain the hardware feel.

Autopilot · Neutral hold enabledFalse

Whether this feature is active in this profile.

Warum hier: Permits centering hold during a supported AP state, separate from following a moving target.

Autopilot · Neutral hold strength0.6

Warum hier: Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.

Aero

Aero · EnabledTrue

Whether this feature is active in this profile.

Warum hier: Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.

Aero · Max flap index1

Where this effect reaches full strength (or has fully faded, for washouts).

Mehr: a more gradual build to a later peak.

Weniger: a quicker build.

Warum hier: Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.

Aero · Min flap index1

Where this effect begins fading in.

Mehr: the effect begins later.

Weniger: it begins earlier.

Warum hier: Sets the first flap detent that admits buffet; this is a handle index, not degrees.

Aero · Shaker enabledFalse

Whether this feature is active in this profile.

Warum hier: Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.

Ground

Ground · EnabledTrue

Whether this feature is active in this profile.

Warum hier: Enables ground effects; each still needs its own strength and contact or motion telemetry.

Engine

Engine · EnabledTrue

Whether this feature is active in this profile.

Warum hier: Enables engine cues with nonzero settings and valid running-engine telemetry.

Mechanical

Mechanical · EnabledTrue

Whether this feature is active in this profile.

Warum hier: Enables accessory cues with configured strengths and observed accessory movement.

Mechanical · Gain0.12

The strength of this effect.

Mehr: a stronger effect.

Weniger: a weaker one.

Warum hier: Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.

Alle Profileinstellungen
Geschätzte Profileinstellungen
ParameterWertWas es steuert und warum
Spring strength0.64 The spring supplies the glider’s selected stick resistance. The baseline spring is 0.64. Its low-speed blend reaches baseline strength at 32.5 KIAS.
Spring deadband0.04 Sets travel around the centre before the baseline spring resists. Smaller values engage it sooner.
Force gain1 The aerodynamic-load gain is 1 with an indicated-speed reference of 65 KIAS. This supplies speed-dependent loading alongside the spring.
Master gain0.85 Scales overall profile strength while preserving effect balance, subject to device and output limits.
Dynamic-pressure blendTrue Allows baseline spring strength to rise with indicated airspeed where the control law permits it.
Minimum spring factor0.4 Sets low-speed spring strength as a fraction of baseline when blending is enabled. One keeps full strength.
Spring wake-up speed9.1 ktSets the IAS where the low-speed spring blend starts rising. This is a feel threshold, not a flight limit.
Spring full-strength speed32.5 ktSets the IAS where the low-speed blend reaches baseline strength; high-speed stiffening also uses it.
Geschwindigkeit zur Kraftabstimmung65.0 ktSets the IAS reference for aerodynamic loading. It is an estimate, not published cruise TAS or a flight limit.
Airspeed spring stiffening0.3 The high-speed spring-stiffening gain is 0.3. It strengthens the permitted spring response above 32.5 KIAS, with the squared-speed ratio capped at 5.
Airspeed stiffening cap5 Limits the squared airspeed ratio used for high-speed spring stiffening; it is not a device-force cap.
Aileron force scale0.6 Roll and pitch aerodynamic scales are 0.6 and 0.78, respectively. They set the aerodynamic axis balance. No custom spring-travel curve is enabled.
Elevator force scale0.78 Scales pitch aerodynamic loading; pitch spring travel and trim responses are separate settings.
Maximum output force0.55 Caps directed-force output. Native spring effects and device limits remain separate.
StickFeel · Trim feel enabledTrue Retained for compatibility and group membership. Trim relief, rather than this flag, controls centre movement.
StickFeel · Trim relief enabledTrue Allows trim relief with supported control law and valid telemetry. Axis authorities set its amount.
StickFeel · Elevator authority0.3 Pitch relief is configured separately from electric-sustainer operation. Pitch authority 0.3 provides load relief and permitted centre movement; roll authority is 0.1.
StickFeel · Aileron authority0.1 Scales supported roll-trim relief and permitted centre movement. Zero removes roll response.
StickFeel · Force trim enabledFalse Enables local force trim, separate from aircraft-owned trim and add-on integration qualification.
StickFeel · G load enabledTrue Allows load-factor changes to modify permitted spring laws. Passive fly-by-wire feel can suppress it.
StickFeel · Rate damping enabledTrue Enables rate damping with the configured coefficients and control law.
Autopilot · Follow enabledFalse Autopilot following is off; the configured spring and load retain the hardware feel.
Autopilot · Follow authority0.05 Sets admitted AP-follow gain, not a percentage of travel. Runtime ownership and input limits still apply.
Autopilot · Neutral hold enabledFalse Permits centering hold during a supported AP state, separate from following a moving target.
Autopilot · Neutral hold strength0.6 Sets admitted AP neutral-hold strength; inactive while neutral hold is disabled.
Aero · EnabledTrue Enables aerodynamic cues; each still needs nonzero strength and its simulator conditions.
Aero · Gain0.4 Sets stall-buffet strength. Zero removes the cue without changing simulator stalls or warnings.
Aero · Gain0 Sets high-Mach buffet strength; onset and full-strength thresholds are separate.
Aero · Gain0 Sets flap buffet at the configured position and speed gates. Flap movement texture is separate.
Aero · Max flap index1 Sets the final flap index for detent normalization. UP plus three detents uses maximum index3.
Aero · Min flap index1 Sets the first flap detent that admits buffet; this is a handle index, not degrees.
Aero · Gain0.1 Sets gear aerodynamic buffet; movement and ground-contact cues are separate.
Aero · Shaker enabledFalse Permits shaker at supported warning conditions; the switch does not establish aircraft equipment.
Aero · Amplitude0.5 Sets triggered shaker strength; inactive while the shaker feature is disabled.
Ground · EnabledTrue Enables ground effects; each still needs its own strength and contact or motion telemetry.
Ground · Gain0.3 Sets rolling texture strength, modified by speed, surface and undercarriage configuration.
Ground · Gain0.3 Sets gear-bump texture during ground motion, separate from touchdown impact.
Ground · Gain0.5 Sets landing-impact strength; landing telemetry and response shape determine the pulse.
Ground · Gain0 Sets reverse-thrust vibration with valid reverser and engine conditions. Zero removes the cue.
Engine · EnabledTrue Enables engine cues with nonzero settings and valid running-engine telemetry.
Engine · Gain0 Sets estimated engine vibration using configured telemetry and response, not measured cockpit vibration.
Mechanical · EnabledTrue Enables accessory cues with configured strengths and observed accessory movement.
Mechanical · Gain0 Sets texture from observed flap movement; a command without movement does not establish the cue.
Mechanical · Gain0.12 Sets texture from observed gear movement, separate from aerodynamic and touchdown effects.
Öffentliche Quellen 9
  1. DG Aviation DG1001EManufacturer descriptionManufacturer description checked 2026-09-12; identifies the FES as a sustainer system.
  2. DG Flugzeugbau DG-1000Research background · Wikipedia revision 1366770132 · retrieved 2026-09-12
  3. Microsoft Flight Simulator aircraft manuals
  4. MSFS 2024 FAQ and edition aircraft inventory
  5. MSFS 2020 FAQ and edition aircraft inventory
  6. Flying the USAF Academy DG-1001 - Jun 2011Stan Kasprzyk · May 2011 acceptance and checkout flights
  7. Pilot Report: DG-1001 Club WLGerhard Marzinzik · 19 August 2016
  8. Women in Gliding Western AustraliaRobyn Becker · issue 34, February–March 2017, printed pages 10–11
  9. ICAO — special designatorsGlider and motorglider categories; checked 2026-09-14

Community & Korrekturen

Wenn deine Erfahrung im Muster sagt, dass hier etwas falsch ist, korrigiere es hier.

Pilotenkorrekturen

Du fliegst dieses Muster? Korrigiere diese Seite.

Diese Seite basiert auf zitierten Quellen, und echte Erfahrung im Muster schlägt jedes Zitat. Zitiere die falsche Aussage und sag uns, was das echte Flugzeug tut. Korrekturen gehen zur Prüfung an den Maintainer und fließen in die nächste Fassung dieser Recherche ein.

Hangargespräche

Offene Unterhaltung über das Fliegen und Tunen der DG Aviation DG-1001E, im Community-Forum. Korrekturen oben gehen privat an den Maintainer; Hangargespräche sind öffentlich.

Noch keine Hangargespräche zur DG Aviation DG-1001E. Sei die erste Stimme.

Community

Community-Profile für dieses Luftfahrzeug

Noch keine Community-Profile für dieses Luftfahrzeug. Nach deinem Geschmack getunt? Teile ein Profil und es erscheint hier.